Nowa wersja platformy, zawierająca wyłącznie zasoby pełnotekstowe, jest już dostępna.
Przejdź na https://bibliotekanauki.pl

PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Czasopismo
2013 | 11 | 2 | 140-150
Tytuł artykułu

In vitro surface biocompatibility of high-content silicon-substituted calcium phosphate ceramics

Treść / Zawartość
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The present work investigates surface biocompatibility of silicon-substituted calcium phosphate ceramics. Different silicon-substituted calcium phosphate ceramic bodies were prepared from co-precipitated powders by sintering at 1300°C. The in vitro bioactivity of the ceramics was assessed in simulated body fluid (SBF) at 37°C for periods up to 4 weeks. The changes in the surface morphology and composition were determined by scanning electron microscopy (SEM) coupled with electron probe microanalysis and energy dispersive spectrometer (EDX). Inductively coupled plasma optical emission spectroscopy (ICP-OES) was used to observe the change in ionic concentration of SBF after removal of the samples. The bioactivity of the ceramics increased with an increasing silicate ion substitution in a systematic way. The surface of ceramics with 2.23% silicon substitution was partially covered with apatite layer after one week, while ceramics with 8.1% silicon substitution were completely covered with apatite in the first week. The porous microstructure of high-concentration Si-substituted ceramics helps the dissolution of surface ions and the leaching process. This allows SBF to reach supersaturation in a short time and accelerate the deposition of apatite layer. [...]
Wydawca

Czasopismo
Rocznik
Tom
11
Numer
2
Strony
140-150
Opis fizyczny
Daty
wydano
2013-02-01
online
2012-11-29
Twórcy
  • Department of Fundamental Chemical Technology, University of Chemical Technology and Metallurgy, 1756, Sofia, Bulgaria
  • Chemistry Department, Faculty of Science, Suez Canal University, Ismailia, 41522, Egypt
Bibliografia
  • [1] L.L. Hench, J. Am. Ceram. Soc. 81, 1705 (1998) http://dx.doi.org/10.1111/j.1151-2916.1998.tb02540.x[Crossref]
  • [2] W. Suchanek, M. Yoshimura, J. Mat. Res. 13, 94 (1998) http://dx.doi.org/10.1557/JMR.1998.0015[Crossref]
  • [3] L.L. Hench, J. Am. Ceram. Soc. 74, 1487 (1991) http://dx.doi.org/10.1111/j.1151-2916.1991.tb07132.x[Crossref]
  • [4] C.P. Klein, A.A. Driessen, K. de Groot, A. van den Hoof, J. Biomed. Mater. Res. 17, 769 (1983) http://dx.doi.org/10.1002/jbm.820170505[Crossref]
  • [5] J.S. Cho, Y.C. Kang, J. Alloy Compd. 464, 282 (2008) http://dx.doi.org/10.1016/j.jallcom.2007.09.092[Crossref]
  • [6] E.C. Victorria, F.D. Gnanam, Artif. Organs. 16, 12 (2002)
  • [7] N. Ikeda, K. Kawanabe, T. Nanamura, Biomaterials 20, 1087 (1999) http://dx.doi.org/10.1016/S0142-9612(99)00005-8[Crossref]
  • [8] L.L. Hench, E.C Ethridge, Biomaterials, An Interfacial Approach (Academic Press, New York, 1982)
  • [9] M. Mazaheri, M. Haghighatzadeh, A.M. Zahedi, S.K. Sadrnezhaad, J. Alloy Compd. 471, 180 (2009) http://dx.doi.org/10.1016/j.jallcom.2008.03.066[Crossref]
  • [10] C. Deng, J. Weng, Q.Y. Cheng, S.B. Zhou, X. Lu, S.X. Qu, X.H. Li, Curr. Appl. Phys. 7, 679 (2007) http://dx.doi.org/10.1016/j.cap.2007.03.005[Crossref]
  • [11] C. Schwatz, B. Jacquemaire, P. Lecestre, P. Frayssinet, J. Mater. Sci., Mater. Med. 10, 821 (1999) http://dx.doi.org/10.1023/A:1008944227417[Crossref]
  • [12] S.H. Kwon, Y.K. Jun, S.H. Hong, I.S. Lee, H.E. Kim, Y.Y. Won, J. Am. Ceram. Soc. 85, 3129 (2002) http://dx.doi.org/10.1111/j.1151-2916.2002.tb00599.x[Crossref]
  • [13] A.M. Pietak, M. Sayer, Biomaterials 27, 3 (2006) http://dx.doi.org/10.1016/j.biomaterials.2005.05.093[Crossref]
  • [14] E.M. Carlisle, Science 167, 279 (1970) http://dx.doi.org/10.1126/science.167.3916.279[Crossref]
  • [15] A.K. Lynn, T. Nakamura, N. Patel, A.E. Porter, A.C. Renouf, P.R. Laity, S.M. Best, R.E. Cameron, Y. Shimizu, W. Bonfield, J. Biomed. Mater. Res. 74, 447 (2005) http://dx.doi.org/10.1002/jbm.a.30373[Crossref]
  • [16] S.V. Dorozhkin, J. Am. Ceram. Soc. 90, 244 (2007) http://dx.doi.org/10.1111/j.1551-2916.2006.01368.x[Crossref]
  • [17] I.R. Gibson, K.A. Hing, J.D. Revell, J.D. Santos, S.M. Best, W. Bonfield, Key Eng. Mater. 203, 218 (2002)
  • [18] I.R. Gibson, S.M. Best, W. Bonfield, J. Biomed. Mater. Res. 44, 422 (1999) http://dx.doi.org/10.1002/(SICI)1097-4636(19990315)44:4<422::AID-JBM8>3.0.CO;2-#[Crossref]
  • [19] P.A.P. Marques, M.C.F. Magalhaes, R.N. Correia, M. Vallet-Regi, Key Eng. Mater. 47, 192 (2001)
  • [20] A.J. Ruys, J. Aust. Ceram. Soc. 29, 71 (1993)
  • [21] S.R. Kim, D.H. Riu, Y.J. Lee, Y.H. Kim, Key Eng. Mater. 85, 218 (2002)
  • [22] T.X. Lian, X.X. Feng, L.R. Fang, Mater. Lett. 59, 3841 (2005) http://dx.doi.org/10.1016/j.matlet.2005.06.060[Crossref]
  • [23] N.Y. Mostafa, H.M. Hassan, Omar H. Abd Elkader, J. Am. Ceram. Soc. 94(5), 1584 (2011) http://dx.doi.org/10.1111/j.1551-2916.2010.04282.x[Crossref]
  • [24] N.Y. Mostafa, H.M. Hassan, F.H. Mohamed, J. Alloy Compd. 479(1–2), 692 (2009) http://dx.doi.org/10.1016/j.jallcom.2009.01.037[Crossref]
  • [25] B. Chang, C. Lee, K. Hong, H. Youn, H. Ryu, S. Chung, K. Park, Biomaterials 21, 1291 (2000) http://dx.doi.org/10.1016/S0142-9612(00)00030-2[Crossref]
  • [26] L. Radev, et al., Cent. Eur. J. Chem. 7(3), 317 (2009) http://dx.doi.org/10.2478/s11532-009-0022-2[Crossref]
  • [27] L. Radev, et al., Processing and Application of Ceramics 4(1), 15 (2010) [Crossref]
  • [28] L. Radev, et al., Cent. Eur. J. Chem. 7(3), 322 (2009) http://dx.doi.org/10.2478/s11532-009-0014-2[Crossref]
  • [29] T. Kokubo, H. Takadama, Biomaterials 27, 2907 (2006) http://dx.doi.org/10.1016/j.biomaterials.2006.01.017[Crossref]
  • [30] H. Takadama, M. Hashimoto, M. Mizuno, T. Kokubo, Phos. Res. Bull. 17, 119 (2004)
  • [31] L. Radev, V. Hristov, M.H. Fernandes, I.M. Salvado, Cent. Eur. J. Chem. 8, 278 (2010) http://dx.doi.org/10.2478/s11532-009-0142-8[Crossref]
  • [32] M.U Hashmi, S.A. Shah, S. Alam, A. Shamim, Ceramics - Silikáty 54(1), 8 (2010)
  • [33] L. Radev, N.Y. Mostafa, I. Michailova, I.M. Salvado, M.H. Fernandes, International Journal of Materials and Chemistry 2, 1 (2012) [Crossref]
  • [34] P.N. Gunawidjaja, A.Y. Lo, I. Izquierdo-Barba, A. Garcıa, D. Arcos, B. Stevensson, J. Grins, M. Vallet-Regi, M. Eden, J. Phys. Chem. C 114, 19345 (2010) http://dx.doi.org/10.1021/jp105408c[Crossref]
  • [35] E. Verne, O. Bretcanu, C. Balagna, C.L. Bianchi, M. Cannas, S. Gatti, C. Vitale-Brovarone, J. Mater. Sci.: Mater. Med. 20, 75 (2009) http://dx.doi.org/10.1007/s10856-008-3537-8[Crossref]
  • [36] M.S. Abdel-Aal, A.A. Shaltout, N.Y. Mostafa, Spectroscopy letter 44, 186 (2011) http://dx.doi.org/10.1080/00387010.2010.495153[Crossref]
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.-psjd-doi-10_2478_s11532-012-0142-y
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.