Ten serwis zostanie wyłączony 2025-02-11.
Nowa wersja platformy, zawierająca wyłącznie zasoby pełnotekstowe, jest już dostępna.
Przejdź na https://bibliotekanauki.pl

PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Czasopismo
2011 | 9 | 2 | 240-244
Tytuł artykułu

The effect of iron nanocrystallites’ size in catalysts for ammonia synthesis on nitriding reaction and catalytic ammonia decomposition

Treść / Zawartość
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Iron catalyst for ammonia synthesis of various mean sizes of iron nanocrystallites were nitrided with ammonia in a differential reactor equipped with systems that made it possible to conduct both thermogravimetric measurements and hydrogen concentration analyses in the reacting gas mixture. The nitriding process was investigated under atmospheric pressure at the temperature of 475°C. It was found that along with an increase of mean size of iron nanocrystallites, with a decrease of specific surface area of the samples, nitriding degree of solid samples increased. At the same time the rate of surface reaction of catalytic ammonia decomposition decreased. Along with an increase of the samples’ specific surface area an increase of the catalyst’s activity was observed. However, it was also observed that the concentration of active sites on the catalysts’ surface decreased along with an increase of specific surface area.
Wydawca

Czasopismo
Rocznik
Tom
9
Numer
2
Strony
240-244
Opis fizyczny
Daty
wydano
2011-04-01
online
2011-02-17
Twórcy
autor
  • Institute of Chemical and Environment Engineering
  • Institute of Chemical and Environment Engineering
Bibliografia
  • [1] A. Nielsen, An Investigation on Promoted Iron (Jul. Gjellerups Forlag, Copenhagen, 1968)
  • [2] J.R. Jennings (Ed.), Catalytic ammonia synthesis fundamentals and practice (Plenum Press, New York, 1991)
  • [3] A. Nielsen (Ed.), Ammonia, catalyst and manufacture (Springer-Verlag, Berlin, 1995)
  • [4] W.G. Frankenburg, In: P.H. Emmet (Ed.), Catalysis (Reinhold, New York, 1955) Vol. 3
  • [5] G. Ertl, In: J.R. Jennings (Ed.), Catalytic ammonia synthesis fundamentals and practice (Plenum Press, New York, 1991)
  • [6] G. Ertl, S.B. Lee, M. Weiss, Surf. Sci. 114, 527 (1982) http://dx.doi.org/10.1016/0039-6028(82)90703-8[Crossref]
  • [7] G. Ertl, In: T. Inui (Ed.), Successful design of catalysts (Elsevier, Amsterdam, 1998)
  • [8] M. Figurski, W. Arabczyk, Z. Lendzion-Bieluń, R.J. Kaleńczuk, S. Lenart, Appl. Catal. A: General 247, 9 (2003) http://dx.doi.org/10.1016/S0926-860X(03)00084-X[Crossref]
  • [9] M. Figurski, W. Arabczyk, Z. Lendzion-Bieluń, S. Lenart, Appl. Catal. A: General 266, 11 (2004) http://dx.doi.org/10.1016/j.apcata.2004.01.032[Crossref]
  • [10] Z. Lendzion-Bieluń, W. Arabczyk, Appl. Catal. A: General 207, 37 (2001) http://dx.doi.org/10.1016/S0926-860X(00)00614-1[Crossref]
  • [11] Z. Lendzion-Bieluń, W. Arabczyk, M. Figurski, Appl. Catal. A: General 227, 255 (2002) http://dx.doi.org/10.1016/S0926-860X(01)00938-3[Crossref]
  • [12] W. Arabczyk, I. Jasińska, Przem. Chem. 85/2, 130 (2006)
  • [13] W. Arabczyk, U. Narkiewicz, D. Moszyński, Langmuir 15/18, 5785 (1999) http://dx.doi.org/10.1021/la981132x[Crossref]
  • [14] W. Arabczyk, K. Kałucki, In: L. Guczi, F. Salymosi, P. Tétényi (Eds.), New Frontiers in Catalysis. Proceedings of the 10th International Congress on Catalysis, 19–24 July 1992, Budapest, Hungary; Stud. Surf. Sci. Catal. 75, 2539 (1993)
  • [15] W. Arabczyk, U. Narkiewicz, K. Kałucki, Vacuum 45, 267 (1994) http://dx.doi.org/10.1016/0042-207X(94)90186-4[Crossref]
  • [16] W. Arabczyk, Polish Journal of Chemical Technology 7/3, 8 (2005)
  • [17] I. Jasińska, K. Lubkowski, W. Arabczyk, Annals of the Polish Chemical Society 2, 1205 (2003)
  • [18] W. Arabczyk, I. Jasińska, K. Lubkowski, Reac. Kin. Catal. Lett. 83/2, 385 (2004) http://dx.doi.org/10.1023/B:REAC.0000046101.89184.b8[Crossref]
  • [19] R. Schlögl, In: J.R. Jennings (Ed.), Catalytic ammonia synthesis fundamentals and practice (Plenum Press, New York, 1991)
  • [20] I. Moszyńska, D. Moszyński, W. Arabczyk, Przem. Chem. 88/5, 526 (2009)
  • [21] K. Kiełbasa, R. Pelka, W. Arabczyk, J. Phys. Chem. A 114/13, 4531 (2010) http://dx.doi.org/10.1021/jp9099286[Crossref]
  • [22] W. Arabczyk, J. Zamłynny, D. Moszyński, Polish J. Chem. 80, 345 (2006)
  • [23] W. Arabczyk, D. Moszyński, U. Narkiewicz, R. Pelka, M. Podsiadły, Catal. Today 124, 43 (2007) http://dx.doi.org/10.1016/j.cattod.2007.02.003[Crossref]
  • [24] W. Arabczyk, J. Zamłynny, D. Moszyński, K. Kałucki, Polish J. Chem. 79, 1495 (2005)
  • [25] W. Arabczyk, R. Pelka, J. Phys. Chem. A 113, 411 (2009) http://dx.doi.org/10.1021/jp8079759[Crossref]
  • [26] R. Pelka, I. Moszyńska, W. Arabczyk, Catal. Lett. 128, 72 (2009) http://dx.doi.org/10.1007/s10562-008-9758-0[Crossref]
  • [27] W. Arabczyk, R. Wróbel, Solid State Phenomena 94, 185 (2003) http://dx.doi.org/10.4028/www.scientific.net/SSP.94.185[Crossref]
  • [28] R. Pelka, P. Glinka, W. Arabczyk, Materials Science-Poland 26/2, 349 (2008)
  • [29] R. Pelka, W. Arabczyk, Topics in Catalysis 52/11, 1506 (2009) http://dx.doi.org/10.1007/s11244-009-9297-y[Crossref]
  • [30] Z. Kowalczyk, J. Sentek, S. Jodzis, M. Muhler, O. Hinrichsen, J. Catal. 169, 407 (1997) http://dx.doi.org/10.1006/jcat.1997.1664[Crossref]
  • [31] N. Takezawa, I. Toyoshima, J. Phys. Chem. 70, 594 (1966) http://dx.doi.org/10.1021/j100874a509[Crossref]
  • [32] N. Takezawa, I. Toyoshima, J. Res. Inst. Catalysis, Hokkaido Univ. 14, 41 (1966)
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.-psjd-doi-10_2478_s11532-010-0145-5
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.