PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
2013 | 39 | 1 | 25-36
Tytuł artykułu

Digital Filtering of Three-Dimensional Lower Extremity Kinematics: an Assessment

Treść / Zawartość
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Errors in kinematic data are referred to as noise and are an undesirable portion of any waveform. Noise is typically removed using a low-pass filter which removes the high frequency components of the signal. The selection of an optimal frequency cut-off is very important when processing kinematic information and a number of techniques exists for the determination of an optimal frequency cut-off. Despite the importance of cut-off frequency to the efficacy of kinematic analyses there is currently a paucity of research examining the influence of different cut-off frequencies on the resultant 3-D kinematic waveforms and discrete parameters. Twenty participants ran at 4.0 m•s-1 as lower extremity kinematics in the sagittal, coronal and transverse planes were measured using an eight camera motion analysis system. The data were filtered at a range of cut-off frequencies and the discrete kinematic parameters were examined using repeated measures ANOVA’s. The similarity between the raw and filtered waveforms were examined using intra-class correlations. The results show that the cut-off frequency has a significant influence on the discrete kinematic measure across displacement and derivative information in all three planes of rotation. Furthermore, it was also revealed that as the cut-off frequency decreased the attenuation of the kinematic waveforms became more pronounced, particularly in the coronal and transverse planes at the second derivative. In conclusion, this investigation provides new information regarding the influence of digital filtering on lower extremity kinematics and re-emphasizes the importance of selecting the correct cut-off frequency.
Słowa kluczowe
Wydawca

Rocznik
Tom
39
Numer
1
Strony
25-36
Opis fizyczny
Daty
wydano
2013-12-01
online
2013-12-31
Twórcy
  • Division of Sport Exercise and Nutritional Sciences, University of Central Lancashire., JKSinclair@uclan.ac.uk
  • School of Psychology, University of Central Lancashire.
  • Division of Sport Exercise and Nutritional Sciences, University of Central Lancashire.
Bibliografia
  • Anderssen RS, Bloomfield P. Numerical differentiation procedures for non-exact data. Numer Math, 1974; 22: 1157-1182
  • Bartlett R. Introduction to Sports Biomechanics: Analyzing Human Movement Patterns 2nd Ed. London, UK: Routledge; 2007
  • DAmico M, Ferrigno G. Technique for the evaluation of derivatives from noisy biomechamcal displacement data using a model-based-bandwidth-selection procedure. Med Biol Eng Comput, 1990; 28: 407-415[Crossref]
  • Enoka RM. Neuromechanics of Human Movement. 4th Ed. Champaign, IL: Human Kinetics; 2008
  • Harris FJ. On the use of window functions for harmonic analysis with discrete Fourier transform. Proc. IEEE, 1978; 66: 51-83[Crossref]
  • Gautam JK, Kumar A RS. Windows: A tool in signal processing. IETE Tech. Rev, 1995; 12: 217- 226
  • Griffiths IW. Principles of Biomechanics & Motion Analysis. Baltimore, MD: Lippincott Williams & Wilkins; 2006
  • Hatze H. The use of optimally regularised Fourier series for estimating higher-order derivatives of noisy biomechanical data. J Biomech, 1981; 14: 13-18[Crossref]
  • Mills C, Joanna S, Wood L. A protocol for monitoring soft tissue motion under compression garments during drop landings. J Biomech, 2011; 44: 1821-1823[Crossref][PubMed][WoS]
  • Jackson K. Fitting mathematical function to biomechanical data. IEEE Trans Biomed Eng, 1979; 26: 172-124
  • Robertson DG, Caldwell G, Hamill J, Kamen G, Whitlesey SN. Research Methods in Biomechanics. Champaign, IL: Human Kinetics; 2004
  • Winter DA. Biomechanics and Motor Control of Human Movement. 3rd Ed. Hoboken, NJ: Wiley; 2005
  • McLaughlin TM, Diltman CJ, Lardner TJ. Biomechanical analysis with cubic spline functions. Res Q, 1977; 48: 569-582[PubMed]
  • Pezzack JC, Norman RW, Winter DA. Assessment of derivative determining techniques used for motion analysis. J Biomech, 1977; 10: 377-382[PubMed][Crossref]
  • Robertson DGE, Dowling JJ. Design and responses of Butterworth and critically damped digital filters. JElectromyogr Kines, 2003; 13: 569-573[Crossref]
  • Sinclair J, Hobbs SJ, Edmundson CJ, Brooks D. Evaluation of kinematic methods of identifying foot strike and toe-off during running. Int J S Sci Eng, 2011; 5: 188-192 Sinclair J, Taylor PJ, Edmundson CJ, Brooks D, Hobbs SJ. The influence of footwear kinetic, kinematic and electromographical parameters on the energy requirements of steady state running. Mov S Sci, 2012; 80: 39-49
  • Sinclair J, Richards J, Taylor PJ, Edmundson CJ, Brooks D, Hobbs SJ. Three-dimensional kinematics of treadmill and overground running. S Biomech, 2013a; 12: 272-282[Crossref][WoS]
  • Sinclair J, Greenhalgh A, Edmundson CJ, Hobbs SJ. The efficacy of barefoot and shod running and shoes designed to mimic barefoot running. Footwear Sci, 2013b; 5: 45-53[Crossref]
  • Smith G. Padding point extrapolation techniques for the Butterworth digital filter. J Biomech, 1989; 22: 967-971[Crossref][PubMed]
  • Soudan K, Dierckx P. Calculation of derivatives and Fourier-coefficients of human motion data, while using spline functions. J Biomech, 1979; 12: 21-26[Crossref]
  • Stankovic L. On the time-frequency analysis based filtering. Ann Télécommun, 2000; 55: 216-225
  • Vaughan CL. Smoothing and differentiation of displacement - time data: an application of splines and digital filtering. Int J Bio-Med Comp, 1982; 13: 375-396[Crossref]
  • Walker JS. Fast Fourier Transforms. 2nd Edition. CRC Press, Boca Raton; 1996
  • Welch P. The use of fast Fourier transform for the estimation of power spectra: A method based on time averaging over short, modified periodograms. IEEE Trans. on Audio and Electroacoustics, 1967; 15: 70
  • Winter DA, Sidwall HG, Hobson DA. Measurement and reduction of noise in kinematics of locomotion. JBiomech, 1974; 7: 157-159[Crossref]
  • Winter DA. Biomechanics and motor control of human movement. John Wiley and Sons, Inc., New York; 1990
  • Wood GA, Jennings LS. On the use of spline functions for data smoothing. J Biomech, 1979; 12: 477-479[Crossref][PubMed]
  • Yu B. Determination of the optimum cut-off frequency in the digital filter data smoothing procedure. Proceedings of the 12th International Congress of Biomechanics, University of California. Los Angeles; 1989
  • Yu B, Gabriel D, Noble L, An KN. Estimate of the optimal cutoff frequency for the butterworth low-pass digital filter. J App Biomech, 1999; 15: 318-325
  • Zernicke RF, Caldwell G, Roberts EM. Fitting biomechanical data with cubic spline functions. Res. Q, 1976; 47: 9-19
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.-psjd-doi-10_2478_hukin-2013-0065
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.