Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 4

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
Chitosan-modified corn starch was prepared and then applied as a glass fiber sizing agent. The effect of the chitosan on starch-based emulsion, film and sized glass fiber was studied. When 5 % of the chitosan was added, the overall performance of the modified film-forming agent was optimal. The viscosity, surface tension and zeta potential of the sizing agent were 44.99 mPa·s, 51.29 mN·m-1 and 4.5 mV, respectively. The modified sizing agent could easily spread over the surface of glass fibre, and conglutinated to the glass surface firmly. The tensile strength and stiffness of modified-starch glass fiber reached 0.43 N·tex-1 and 4.96 cm. Glass fiber with good overall performance was obtained.
PL
W pracy przygotowano skrobię kukurydzianą modyfikowaną chitozanem, a następnie zastosowano ją jako środek klejący włókien szklanych. Określono lepkość, napięcie powierzchniowe i potencjał zeta środka klejącego. Zmierzono wytrzymałość na rozciąganie i sztywność zmodyfikowanego włókna szklanego. Stwierdzono, że modyfikacja skrobi chitozanem powoduje poprawienie jej właściwości jako środka klejącego. Modyfikacja zwiększyła przyczepność skrobi do włókien i poprawiła ich właściwości mechaniczne.
EN
We investigate a fiber diameter influence on optical transport of dielectric particles along subwavelength optical fibers using a near infrared laser of 1.55 μm wavelength. Theoretical analysis indicates that at 1.55 μm, the evanescent field at the fiber surface increases at first and then decreases with an increase of the fiber diameter from 600 nm to 1.6 μm, exhibiting a maximum at the fiber diameter of 950 nm. Based on three-dimensional finite-difference time-domain simulations, optical scattering forces acted on the dielectric particles and transport velocities of the particles were calculated for two fibers in the diameters of 930 nm and 1.5 μm. To support the theoretical analysis, experiments were performed using the two fibers to transport SiO2 particles (sizes of 530 nm and 1.5 μm) and TiO2 particles (size of 1.5 μm). The results show that with the same laser power launched into the two fibers, larger transport velocities can be obtained along the 930 nm diameter fiber.
EN
A rapid voltage sag detection method based on weighted least-squares estimation (WLSE) with harmonic models is proposed to satisfy the requirement of the dynamic voltage restorer. The covariance resetting technique is adopted to detect the voltage sag accurately and rapidly, even in condition the voltage contains considerable amount of harmonic components. The threshold of covariance resetting is larger than the steady state error between the sample and estimation of the voltage for the purpose of favorable covariance resetting only if the voltage sag occurs. The threshold of covariance resetting can be small because the steady state error will contain little harmonic components by the proposed WLSE method which have a positive impact on the detecting speed even if the depth of voltage sag is low. The algorithm has been tested under different conditions so as to verify its performance on voltage sag detection.
PL
Zaproponowano metodę szybkiej detekcji zapadu napięcia bazująca na określaniu średniej ważonej najmniejszych kwadratów. Do detekcji zapadu wykorzystuje się technikę kowariancji co umożliwia szybką detekcję nawet przy znacznej zawartości harmonicznych. (Ulepszona metoda detekcji zapadów napięcia bazująca na określaniu wartości ważonej najmniejszych kwadratów z uwzględnieniem harmonicznych)
EN
This paper presents a dual-loop control strategy for parallel interleaved three-phase four-leg PWM boost-type rectifier in double conversion UPS. The interleaving method is adopted for its main benefit of harmonic cancellation. The current in the fourth leg is treated as a perturbation because the fourth leg is shared by rectifier and inverter, and the controller can be designed in a-b-c coordinate conveniently. The DCbus voltage feedback in outer control loop can be delayed by quarter-cycle to filter out the oscillating component when the load of UPS is unbalanced. The performance of proposed control scheme is verified by experimental results.
PL
W artykule zaprezentowano strategię dwóch pętli sterowania trójfazowym czterogałęziowym prostownikiem PWM typu boost w układzie UPS. Wykorzystano metodę z przeplotem w celu eliminacji wpływu harmonicznych. (Dwuobwodowa strategia sterowania trójfazowym prostownikiem PWM w układach UPS)
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.