Ograniczanie wyników
Czasopisma help
Autorzy help
Lata help
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 126

Liczba wyników na stronie
first rewind previous Strona / 7 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  mortar
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 7 next fast forward last
EN
This paper presents a quantitative characterisation of the fracture openings obtained in triaxial shear tests on several cement mortar samples. The comparison was carried out on three samples with various apertures using different methods of semi-destructive and non-destructive characterisation: optical microscopy, scanning electron microscopy, X-ray computed tomography, digital volume correlation and the 14C-polymethylmethacrylate method. The fracture aperture distribution results are in good agreement between the different methods. Although the opening results obtained are comparable, the most advantageous method was considered to be XRCT profile analysis based on the size of the target area studied and the specific characteristics of each technique.
EN
This paper investigates the potential of expanded clay kiln dust (ECKD) as a sustainable alternative in cementitious materials, aiming to address environmental concerns associated with traditional cement production. The study conducts a comprehensive evaluation, including material characterization, mechanical testing, and microstructural analysis, to assess the performance of ECKD in mortar formulations. Results indicate that ECKD influences various mortar properties, such as workability, air entrainment, and density. Mortar mixes containing 10% of ECKD show enhanced compressive and tensile strength compared to control mixes, indicating its effectiveness as a cement substitute. Moreover, the long-term durability of ECKD samples in seawater revealed promising results, confirming their favorable durability. In conclusion, the study demonstrates the feasibility and efficacy of incorporating ECKD in mortar formulations to mitigate the environmental impact of cement production while enhancing mechanical properties.
EN
The work aim is to investigate the rheological and mechanical behavior of eco-friendly mortar made with marble powder. Marble have used as sand by total substitution of natural sand and as additional materials by partial substitution of cement. Firstly, rheological tests were carried out on the cement pastes in order to studying the effect of cement substitution by marble powder on the rheological behavior. Secondly, our study is devoted to evaluate the mechanical performances (flexural strength, compressive strength, mechanical behavior and ultrasonic pulse velocity) of a fluid mortar such as the case of the self-compacting mortars elaborated with the marble powder as addition materials and as a sand. The mechanical test results show that a significantly improved of compressive strength and mechanical behavior of an ecological cement mortar made with marble waste as a natural sand. However, marble-based mortars with 100% of marble sand have given a mechanical strength similar to that obtained by control cement mortar (100% natural sand). It was also noted that it can be obtained an ecological cement mortar made with 30% of marble powder as an addition supplementary materials. This leads to a reduction in cement consumption cad a reduction in CO2 gas emissions caused by cement production.
EN
Potentially toxic elements (PTEs) in ecosystems and construction materials pose a significant environmental concern. Various qualitative and quantitative techniques are employed to analyse PTEs in a sample. This study explores an innovative approach that incorporates PTE (Cd, Zn, Cu, Pb) adsorbent ash, specifically adsorbed paper ash (APA) and adsorbed mulch ash (AMA), into mortar composites. This approach offers several advantages, including reduced reliance on waste landfills, energy recovery during the ashing process, and immobilisation of PTEs within a cement matrix. This study evaluated the elemental and microstructural characteristics of mortar composites incorporated with adsorbed ash by using a scanning electron microscope (SEM) equipped with energy-dispersive X-ray spectroscopy (EDS), followed by analysing the elemental maps with ImageJ software version 1.8.0. Parallel experiments were conducted to measure the leaching of mortar composites. The total elemental content of PTEs in the leachate solutions was quantified using an inductively coupled plasma-optical emission spectrometer (ICP-OES). The differences in adsorption capacity and leaching of PTEs observed between paper and mulch can be ascribed to their distinct affinities, which are influenced by the recorded pH levels. The examined elemental mapping revealed a consistent distribution across the APA and AMA mortar matrix structures, with greater intensity than the blank mortar sample. Furthermore, there is a reverse correlation between the order of percentage area coverage of the immobilised elements and the order of leaching, indicating that the PTEs were successfully immobilised. The percentage of PTE area coverage within AMA mortar composites followed the subsequent order: Pb > Cd > Zn > Cu, constituting 32.1 %, 28.6 %, 13.8 %, and 12.4 %, respectively. This order was also observed in the blank mortar composite, with percentages of 12.5 %, 8.6 %, 4.5 %, and 4.2 %, respectively. In the case of the APA mortar composite, the percentage of area coverage followed a different sequence: Cd > Pb > Zn > Cu, representing 27.7 %, 26.6 %, 14.5 %, and 14.1 %, respectively. The results also demonstrated notable improvements in the microstructure of the mortar when AMA and APA are incorporated, which is attributed to the ash additives’ micro-filling capacity. The findings contribute to advancing environmentally sound construction practices, with implications for sustainable waste management and pollution mitigation.
PL
W artykule przedstawiono spienione geopolimery jako skuteczne materiały termoizolacyjne dla budynków, odporne na wysokie temperatury. Omówiono metody wytwarzania porowatej mikrostruktury w geopolimerach, kładąc nacisk na zastosowanie środków spieniających, takich jak proszek aluminiowy. Prezentowane badania koncentrują się na opracowaniu pianek geopolimerowych z odpadów przemysłowych [popiołów lotnych i skały płonnej] o zwiększonej odporności termicznej i ogniowej przy zachowaniu wysokich właściwości mechanicznych. Nowością jest ocena tych pianek na średniej wielkości panelach [750 mm x 750 mm x grubość] i badanie ich odporności ogniowej poprzez kompleksowe badania, co odróżnia je od prezentowanych w literaturze, w której badane są materiały w mniejszej skali. Do przygotowania pianek geopolimerowych wykorzystano popiół lotny klasy F z elektrowni Skawina w Polsce oraz skały odpadowe z kopalni węgla KWK Wieczorek w Katowicach, Polska. Badania mają na celu wniesienie nowych informacji na temat zachowania się pianek geopolimerowych w warunkach pożaru według scenariusza ISO 834-1, co może otworzyć drogę do ich potencjalnych zastosowań jako panele izolacyjne termicznie w budynkach. Przedstawiono i omówiono wyniki badań odporności ogniowej, oceny właściwości mechanicznych po pożarze, obserwacje SEM, analizę EDS, analizę XRD oraz efekty starzenia. Podczas gdy spienione geopolimery wykazują trwałość i odporność ogniową, zwrócono uwagę na zmiany ich właściwości mechanicznych i mikrostruktury w wyniku ekspozycji na ogień. Badania podkreślają potencjał wykorzystania pianek geopolimerowych jako zrównoważonego rozwiązania do izolacji termicznej w budownictwie, otwierając drogę do dalszych badań i zastosowań w branży budowlanej.
EN
The paper introduces foamed geopolymers as effective thermal insulation materials for buildings, with the ability to withstand high temperatures. The production methods for achieving a porous microstructure in geopolymers are discussed, emphasizing the use of foaming agents like aluminium powder. The presented research focuses on developing geopolymer foams from industrial waste materials [fly ash and coal gangue] with enhanced thermal and fire resistance while maintaining robust mechanical properties. The novelty lies in evaluating these foams at a medium-sized panel scale [750 mm x 750 mm x thickness] and assessing their fire resistance through comprehensive tests, differentiating it from existing literature that primarily explores smaller-scale materials. Class F fly ash from Skawina power plant, Poland and waste rock from coal mining KWK Wieczorek, Katowice, Poland were used for preparation of geopolymer foam. The research aims to contribute insights into the fire performance of geopolymer foams under ISO 834-1 fire scenario, paving the way for potential applications as thermal insulation panels in building facilities. Results from fire exposure tests, post-fire mechanical property assessments, SEM observations, EDS analyses, XRD analyses, as well as ageing effects are presented and discussed. While foamed geopolymers demonstrate resilience and fire resistance, variations in their mechanical properties and microstructure due to fire exposure are highlighted. The research underlines the potential of employing geopolymer foams as a sustainable solution for thermal insulation in construction, opening up further exploration and application in the construction industry.
PL
W artykule omówiono badania nad zastosowaniem kruszywa recyklingowego w postaci regranulatu polipropylenowego (PP) w druku 3D kompozytów cementowych. Skupiono się na ocenie wpływu zastąpienia kruszywa naturalnego regranulatem PP na właściwości mechaniczne i reologiczne kompozytu na spoiwie cementowych. Przeprowadzono badania wytrzymałości na zginanie i ściskanie dla próbek pielęgnowanych w warunkach normowych oraz poddanym oddziaływaniu temperatury 300°C. W badaniach przetestowano różne poziomy zastąpienia kruszywa naturalnego regranulatem polipropylenowym PP (10%, 30%, 50%) w mieszance betonowej. Stwierdzono, że zastąpienie kruszywa naturalnego regranulatem PP powoduje obniżenie wytrzymałości na ściskanie i zginanie próbek przechowywanych w warunkach normowych do 66,36%, a próbek poddanych oddziaływaniu temperatury 300°C aż do 80,11%. Ponadto przeprowadzono badania niszczące kratownic wykonanych w technologii druku 3D przy wykorzystaniu mieszanki z 10% zastąpieniem kruszywa naturalnego przez regranulat PP oraz mieszanki referencyjnej. Wykazano, że w wydrukowanej konstrukcji kratownicy, gdzie o kryterium zniszczenia zdecydowała wytrzymałość na rozciągania, redukcja wytrzymałości związana z zastosowaniem regranulatu PP nie była statystycznie istotna w porównaniu do mieszanki referencyjnej.
EN
The paper discusses research on the use of recycled aggregate in the form of polypropylene (PP) regranulate in 3D printing of cement composites. The focus was on analyzing the impact of replacing natural aggregate with PP regranulate on the mechanical and rheological properties of the cement-based composite. Tests were conducted to assess the flexural and compressive strength of samples cured under standard conditions and exposed to a temperature of 300°C. The study tested various levels of natural aggregate replacement with PP regranulate (10%, 30%, 50%) in the cement mixture. It was found that replacing natural aggregate with PP regranulate resulted in a reduction in compressive and flexural strength by up to 66.36% for samples stored under standard conditions, and by up to 80.11% for samples exposed to 300°C. Additionally, destructive testing was performed on trusses made using 3D printing technology for a mix with 10% replacement of natural aggregate by PP regranulate and a reference mix. The tests showed that in the printed truss structure, where tensile strength was the failure criterion, the reduction in strength due to the use of PP regranulate was not statistically significant compared to the reference mix.
EN
Mortar mixtures were prepared by partial replacement of Portland cement with 0%, 10%, and 15% of residual fly ash to determine the structural evolution and compressive strength at 3, 7, 14, and 28 days. Portlandite, calcite, ettringite, iron oxide, silicon oxide, and sillimanite were identified in the standard mortar, and, additionally, magnetite was identified in the mortar with 10% and 15% fly ash. X-ray diffraction peaks corresponding to portlandite and ettringite increased in intensity with increasing curing time as a result of the consolidation of mineral species. The SEM analysis revealed that the standard mortar contained mainly portlandite and ettringite at 28 days, while the samples with 10% and 15% fly ash contained particles of fly ash coated with portlandite and ettringite, particles with a smooth surface, and particles of fly ash with signs of attack on their surfaces. The sc increased when the age of the mortar and the substitution of Portland cement by fly ash was increased from 3 to 28 days and from 0 to 15%, respectively.
PL
Artykuł porusza tematykę wymagań, które powinny spełniać cienkowarstwowe zaprawy murarskie. Autorzy zwracają uwagę zarówno na parametry deklarowane, jak i te istotne dla wykonawców. Omawiają zasady aplikacji zapraw.
EN
The article describes the requirements that has be met by thin-bed mortars. The authors pay outlines both the declared parameters and those important for contractors as well as principles of mortar application.
PL
W artykule przedstawiono wyniki prac projektowych i badawczych, których celem było wytworzenie lekkiego kruszywa ultrakompozytowego (UCLA - ultracomposite lightweight aggregate) w rezultacie połączenia odpadów pochodzących z różnych strumieni. W wyniku procesu odpowiednio przeprowadzonej obróbki termicznej w specjalnie zaprojektowanych warunkach, wytworzono kompozyt w postaci granulek odpowiadających frakcji kruszywowej 2-8 mm. Uzyskano różne rodzaje kruszyw lekkich wykonanych przy użyciu różnych drobnoziarnistych wypełniaczy mineralnych, których podstawowe właściwości zostały zbadane i zaprezentowane. Dodatkowo zostały wykonane wstępne badania aplikacyjne tych kruszyw w funkcji składnika kompozytu betonowego. Badania przeprowadzono na zmodyfikowanych zaprawach normowych powszechnie wykonanych według zaleceń normy PN-EN 196-1, gdzie 25% objętości piasku normowego zostało zastąpione sztucznym kruszywem ultrakompozytowym.
EN
In this article authors presented research and project results which target was production of lightweight aggregates as a result of connect waste from different sources. During works about process and technology production new ecological aggregate was used physical properties of polymers and their high viscosity in phase of melting. As a result of thermal treatment in special production conditions was created composite in the granules shape. Obtained coarse aggregates 2/8 mm based on different waste mineral filler. All aggregates was tested in basic properties scope and presented. Additionally preliminary application tests those aggregates was made like function of concrete’s ingredient. The research were carried out on modified standard mortars commonly made according to the recommendations of the PN-EN 196-1 standard, where 25% of the volume of standard sand was replaced with artificial ultra-composite aggregate.
PL
Waloryzacja odpadów rolniczych jest ważna zarówno pod względem ekonomicznym jak i środowiskowym. Celem pracy było zbadanie możliwości wykorzystania karbonizatu z pestek moreli jako wypełniacza do poprawy właściwości mechanicznych zaprawy i wspomagania sekwestracji CO2. Karbonizat został wyprodukowany w wyniku pirolizy łupin pestek moreli w temperaturze 500°C. Karbonizat o wymiarach mniejszych niż 500 nm otrzymano w procesie wysokoenergetycznego mielenia kulowego. Do określenia morfologii ziaren karbonizatu użyto skaningowego mikroskopu elektronowego. Krbonizat w różnych procentach objętościowych [0,00-0,04-0,06-0,08-0,12-0,15%] dodawano do zaprawy. Zaprawę formowano w beleczki o wymiarach 40x40x160 mm. Po dojrzewaniu w wodzie w temperaturze 20°C przez 28 dni wykonano badania wytrzymałości na ściskanie i zginanie. Mieszanka zawierająca 0,04% objętości nanometrycznego karbonizatu wyróżniała się wzrostem wytrzymałości na zginanie i ściskanie odpowiednio o 5% i 15%, a jej energia pękania przy zginaniu i ściskaniu wzrosła odpowiednio o 98% i 38% w stosunku do zaprawy referencyjnej. Ponadto, w mieszance o zawartości 0,12% objętości nastąpił wzrost wytrzymałości na zginanie i ściskanie odpowiednio o 32% i 11%. Natomiast wzrost energii pękania przy zginaniu i ściskaniu wyniósł odpowiednio 52% i 25% w porównaniu z zaprawą referencyjną. Wyjaśniono mechanizmy wpływu nanometrycznego karbonizatu na płynięcie, wytrzymałość i energię pękania. Ziarna karbonizatu mostkują pęknięcia, odwracają je, działają jako miejsca nukleacji hydratacji, wzmacniają matrycę przez jej porowatą strukturę i rozwijają wewnętrzne twardnienie, co prowadzi do wzrostu wytrzymałości i energii pękania. Badanie to wykazuje, że karbonizat produkowany z łupiny pestek moreli ma potencjał do wykorzystania jako mieszanina sekwestrująca węgiel w celu poprawy efektywności zaprawy, a tym samym wykorzystania odpadów jako materiału budowlanego, przyczyniając się do rozwoju gospodarki i ochrony środowiska.
EN
Valorization of agricultural wastes is important both economically and environmentally. This study aimed to investigate the use of biochar as a filler to improve the mechanical properties of mortar and to help sequestrate CO2. The biochar was produced by pyrolysis of apricot kernel shell at 500°C. Nanobiochar particles with dimensions less than 500 nm were obtained by high-energy ball milling process. Scanning electron microscope was used for determining the morphology of nanobiochar. The nanobiochar at different volume percentages [0.00-0.04-0.06-0.08-0.12-0.15%] was added to mortar. The mortar was casted into 40x40x160 mm molds. After water curing at 20°C for 28 days, compressive strength and flexural strength tests were performed. The mixture containing 0.04% nanobiochar by volume had an increase in flexural and compressive strengths by 5% and 15% respectively, while its fracture energies for flexure and compression increased by 98% and 38% respectively compared to the reference mortar. Furthermore, the mixture having 0.12% volume had an increase in flexural and compressive strengths by 32% and 11%, respectively, while the increase in fracture energies for flexure and compression was 52% and 25%, respectively, compared to the reference mortar. The mechanisms of nanobiochar effect on flow, strength, and fracture energy were enlightened. The nanobiochars bridge the cracks, divert the cracks, act as hydration nucleation sites, enhance the matrix by its porous structure, and developed internal curing that led to increase in strength and fracture energy. This study suggests that the biochar produced from the apricot kernel shell has the potential to be used as a carbon sequestering mixture to improve performance of mortar and thereby utilizing waste as a construction material, contributing to the economy and environment.
PL
Druk 3D betonu to innowacyjna technologia, która rewolucjonizuje branżę budowlaną. Ten zaawansowany proces pozwala na precyzyjne i zautomatyzowane wytwarzanie trwałych struktur z betonu, wykorzystując spoiwa na bazie cementu do druku. Druk 3D betonu oferuje wiele zalet. Po pierwsze, dzięki temu procesowi możliwe jest tworzenie niestandardowych kształtów i wzorów, które są trudne do osiągnięcia tradycyjnymi metodami budowlanymi. Ponadto, dzięki precyzyjnemu sterowaniu drukiem 3D można zminimalizować zużycie materiałów, co przekłada się na oszczędność kosztów i ograniczenie negatywnego wpływu na środowisko. Cement glinowy jako składnik spoiwa powoduje znaczne przyspieszenie czasu wiązania, co może być przydatne w technologii druku 3D. Przedstawione w artykule badania analizują możliwość wykorzystania cementu glinowego do modyfikacji mieszanki betonowej przeznaczonej do druku. Badania wykazały, że przy odpowiedniej kompozycji superplastyfikatora i spoiwa możliwe jest osiągnięcie wymaganych czasów wiązania.
EN
3D printing of concrete is an innovative technology that is revolutionizing the construction industry. This advanced process allows for the precise and automated production of durable concrete structures using cement-based binders for printing. 3D concrete printing offers many advantages. Firstly, thanks to this process, it is possible to create custom shapes and patterns that are difficult to achieve with traditional construction methods. Additionally, through precise control of 3D printing, the use of materials can be minimized, resulting in cost savings and a reduced negative environmental impact. Moreover, alumina cement as a binder component significantly accelerates the setting time, which can be useful in 3D printing technology. The research presented in the article analyzes the possibility of using alumina cement to modify the concrete mix intended for printing. Studies have shown that with the appropriate composition of superplasticizer and binder, it is possible to achieve the required setting times.
PL
Rozwój technologii druku 3D pozwala na zastosowanie go w wielu obszarach budownictwa, w tym w zakresie małej architektury. Celem pracy było zaprojektowanie i wykonanie w technologii druku 3D obiektu małej architektury - siedziska, z zastosowaniem mieszanki betonowej, w której kruszywo naturalne zostało zastąpione odpadem garnetu pochodzącym z obróbki strumieniowo-ściernej. Dotychczasowe prace w zakresie wykorzystania tego kruszywa pokazują, że istnieje możliwość jego utylizacji w druku 3D kompozytów cementowych. W celu realizacji zadania wykonano podstawowe badania materiałowe dla mieszanek o zawartości kruszywa z recyklingu do 50%. Kolejnym krokiem było wykonanie modelu siedziska i ustalenia potrzebnych wymiarów przekrojów dla prawidłowego funkcjonowania elementu. Finalnie wykonano siedzisko w technologii druku 3D. Projekt mieszanki został opracowany z myślą o wykorzystaniu odpadów, jednocześnie uwzględniając wymagania związane z drukiem betonowym w technologii 3D. Wykonanie elementu małej architektury z betonu drukowanego z kruszywem po obróbce strumieniowo-ściernej potwierdziło możliwość stosowania tej technologii. Badania stanowią wstęp do dalszych analiz uwzględniających optymalizację produktu oraz analizę jego trwałości.
EN
The development of 3D printing technology allows it to be used in many areas of construction. The work is aimed to design and manufacture a small architectural object using 3D printing technology, in the form of a seat. It is going to be made of a concrete mixture with aggregate waste after blasting and abrasive treatment (spent garnet). Previous work on this aggregate shows that it is possible to use it in the 3D printing of cement composites. Basic material tests were carried out for mixtures with recycled aggregate content of up to 50% to carry out the task. The next step was to make a model of the seat and determine the necessary cross-sectional dimensions for the correct functioning of the element. Finally, the seat was made using 3D printing technology. The mix design has been developed with waste in mind while taking into account the requirements of 3D concrete printing. The construction of an element of small architecture made of printed concrete with aggregate after blasting and abrasive treatment confirmed the possibility of using this technology. The research is a prelude to further analysis, including product optimization and durability analysis.
EN
The effect of the air-entraining agent on properties of mortar mixtures as well as on the compressive strength of hardened mortars was the objective of this study. Such mortars contain a certain amount of evenly spread closed air-voids pores with dimensions of 0.02-0.05 mm. On the one hand, the presence of a large volume of such air bubbles results in the reduction of mechanical properties of mortar. On the other hand, the use of this technological approach improves rheological properties of mortar mixture. The effect of the air entrainment on the flow, density, volume of entrained air of mortar mixture and compressive strength of hardened mortar was established. Obtained results show substantial increasing in the mortar flow at cement to sand ratio 1:2 by 1.8 times. The further decrease of C:S ratio results in a slight increase of the flow and even negligible its decrease at C:S = 1:4 compared to the reference mortar. The increase of the volume of entrained air results in the decrease of the density and compressive strength of mortar, but improve the resistance to freezing/thawing cycles. The results of this study can be a guide for mortar mix design to choose the most appropriate mix proportion to produce economically efficient mortars.
PL
Celem badań był wpływ domieszki napowietrzającej na właściwości mieszanek zaprawowych oraz wytrzymałość na ściskanie zapraw. Zaprawy takie zawierają pewną ilość równomierne rozprowadzonych, zamkniętych porów powietrznych o wymiarach 0,02-0,05 mm. Z jednej strony, obecność dużej ilości takich pęcherzyków powietrza powoduje obniżenie właściwości mechanicznych zaprawy. Z drugiej strony, zastosowanie tego podejścia technologicznego poprawia właściwości reologiczne mieszanki zaprawy. Określono wpływ domieszki napowietrzającej na urabialność, gęstość, objętość wprowadzonego powietrza oraz wytrzymałość na ściskanie zaprawy. Uzyskane wyniki wskazują na znaczny, 1,8-krotny wzrost rozpływu zaprawy przy stosunku cementu do piasku 1:2. Dalsze zmniejszanie stosunku C:S powoduje niewielki wzrost urabialności, a nawet znikomy jego spadek przy C:S = 1:4 w porównaniu do zaprawy wzorcowej. Wzrost objętości wprowadzonego powietrza powoduje zmniejszenie gęstości i wytrzymałości na ściskanie zaprawy, ale poprawia mrozoodporność. Wyniki badań mogą być wskazówką przy projektowaniu zapraw, aby wybrać najbardziej odpowiednie proporcje mieszanki w celu wytworzenia ekonomicznie efektywnych zapraw.
EN
The enormous quantities of ceramic waste lead us to its use in the construction field to solve both an environmental and an economic problem. The present study aims to recycle ceramic waste powders (CWP) to produce mortars. To this end, five crushed sand (CS) based mortar mixes with prismatic dimensions of 4x4x16 cm³ were prepared by partially replacing 0, 5, 10, 15, and 20% white cement with CWP. Tests were carried out to assess bulk density, compressive strength, and ultrasonic pulse velocity (UPV). The results obtained showed that increasing the proportion of ceramic waste powder (CWP) in mortar mixes led to a decrease in bulk density, compressive strength, and UPV in the different mortars. In addition, linear correlations were observed between the different variables studied.
EN
The paper presents the results of research on the utilization of textile denim sludge waste, which was used to obtain concrete and mortar. For this purpose, cement and sand were replaced with the powdered sludge in the amount of 5 and 10 wt. The sludge was initially analyzed by FTIR and XRD to identify functional groups and chemical composition, respectively. Replacing sand with sludge resulted in a significant reduction in the concrete compressive and flexural strength (> 50%). Significantly better results were obtained by replacing cement with 5 wt% of sludge. In this case, the concrete compressive strength decreased by only 14%, and the flexural strength by 15%.
PL
W pracy przedstawiono wyniki badań dotyczące utylizacji odpadów szlamowych z dżinsu tekstylnego, których użyto do otrzymywania betonu i zaprawy murarskiej. W tym celu cement i piasek zastąpiono sproszkowanym szlamem w ilości odpowiednio 5 i 15% mas. Osad poddano wstępnej analizie za pomocą FTIR i XRD w celu zidentyfikowania odpowiednio grup funkcyjnych i składu chemicznego osadu. Zastąpienie piasku szlamem spowodowało znaczne zmniejszenie wytrzymałości betonu na ściskanie i zginanie (> 50%). Znacznie lepsze wyniki uzyskano zastepując cement szlamem. W tym przypadku wytrzymałość betonu na ściskanie zmniejszyła się tylko o 14%, a wytrzymałość na zginanie o 15%.
16
Content available remote Włókna celulozowe w systemach ociepleń
EN
Purpose: This paper aims to prepare depolymerized polyethylene terephthalate (DPET) powder from recycled plastic water bottles. Adding this DPET powder to the cement mortar was also studied. Design/methodology/approach: The adopted PET depolymerization process includes the usage of both ethylene glycol (EG) as solvent and nano-MgO as a catalyst. A bubble column reactor was designed for this process. Five different mortar groups were made; each has different DPET content of 0%, 1%, 3%, 6% and 9% as a sand replacement. The flexural strength testand the water absorption measurement are done after two curing periods: 7 and 28 days. Findings: The research finding demonstrated that the flexural strength of mortar was reduced by increasing the DPET powder percentage and the maximum dropping was 15% when 9% of DPET was added. The ability of the mortar to absorb the water was reduced by 14.5% when DPET powder was 9%. The mortar microstructure is featured with fewer cavities and porosity. Research limitations/implications: This work’s employed bubble column technique is limited only to the laboratory environment and needs to be scaled up within industrial mass production. For future research, it is suggested to decrease depolymerization time by using smaller pieces of plastic water bottle waste and trying other types of nanocatalyst. Practical implications: The modified mortar can be utilized in areas where moisture, rainfalls, and sanitation systems exist. Originality/value: The article claims that depolymerized waste PET improves chemical process efficiency by lowering reaction time and improving mass and heat transfer rates. Besides, this approach saves money. It is found out that the depolymerized plastic waste is much more functional due to its high cohesion capability than being used as small PET pieces.
PL
W artykule przedstawiono i omówiono wyniki badań wybranych zapraw murarskich i tynkarskich wykonanych z cementów niskoemisyjnych, zawierających w swoim składzie popiół lotny krzemionkowy, granulowany żużel wielkopiecowy oraz wapień. Badania wykazały, że cementy niskoemisyjne mogą być stosowane do produkcji takich wyrobów w miejsce dotychczas stosowanego cementu CEM I bez dodatków.
EN
In the article the results of tests of selected masonry and plaster mortars made of low-carbon cements, containing silica fly ash, granulated blast furnace slag and limestone were presented and discussed. The research has shown that low-carbon cements can be used for the production of such materials in place of the previously used CEM I cement without additives.
PL
W pracy zaprezentowano wpływ procentowego zastąpienia piasku kwarcowego cenosferami na wybrane właściwości zapraw cementowych. Stopniowano ilość dodatku cenosfer co 20% całkowitej objętości kruszywa, zaczynając od zaprawy referencyjnej bez wypełniacza, po zaprawę wykonaną wyłącznie na bazie cenosfer. Oceniano takie parametry, jak gęstość, współczynnik przewodzenia ciepła i wytrzymałość na zginanie i ściskanie.
EN
The paper presents the effect of the percentage replacement of quartz sand with cenospheres on selected properties of cement mortars. The amount of cenospheres addition was graded every 20% of the total aggregate volume, starting from the reference mortar without filler, to mortar made solely on the basis of cenospheres. Parameters such as density, thermal conductivity as well as bending and compressive strength were assessed.
EN
Polyethylene terephthalate is a synthetic material known as PET. PET strapping bands is a material commonly used in all industries for packaging and bundling. The excessive use of this material has led to the pollution of the urban environment, which necessitated the search for effective solutions to dispose of this waste. The treatment and reuse of these materials is among the best solutions that contribute to reducing environmental pollution on the one hand and enabling the obtaining of economical products on the other hand. The main purpose of this experimental study is to valorize dune sand mortar and PET waste in the manufacture of cement mortar. It also aims to investigate the impact of the inclusion of recycled PET fibers on the physical and mechanical properties of the reinforced mortar. The study was carried out in several phases; after a physical and chemical characterization of the materials used, a method for the composition of mixtures was proposed, which is based on the progressive substitution of dune sand by recycled PET fibers. The quantity of cement added to each mixture is fixed at 450 g, and that of dune sand and fibers is taken as equal to 1350 g. In order to properly examine the influence of the incorporation of fibers on the properties of the reinforced mortar, the substitution rate of dune sand by the fibers varied from 0% to 2.5% with a step of 0.5%. For each mixture, many characteristics of the mortar were tested, such as consistency, bulk density, compressive strength, and flexural strength. The results obtained show that the incorporation of PET fibers has a significant effect on the fresh and hardened properties of the treated mortar.
first rewind previous Strona / 7 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.