Odpady tekstylne od 2025 r. będą musiały być gromadzone selektywnie na obszarze wszystkich państw Unii Europejskiej. W pracy przedstawiono prawdopodobny wpływ nowych regulacji na energetyczne wykorzystanie odpadów tekstylnych w Polsce. W artykule przedstawiono złożoność frakcji odpadów tekstylnych, wskazując na różnorodność materiałów ją tworzących. Analizie poddano również wielkość strumienia tych odpadów, powstającego w Polsce obecnie i w kolejnych latach. Wyniki analizy wskazują na wyższe ilości odpadów tekstylnych aniżeli wynikające z zapisów Krajowego Planu Gospodarki Odpadami. W artykule zwięźle przedstawiono możliwości recyklingu omawianych odpadów. Oszacowano także teoretyczny potencjał energetyczny generowanych rocznie w Polsce odpadów tekstylnych. Jak wykazano, ze względu na ograniczone możliwości recyklingu odpadów tekstylnych oraz ze względu na niewielki wpływ nowych regulacji prawnych na system gospodarki odpadami, metody termiczne wciąż będą odpowiadały za zagospodarowanie istotnej części tych odpadów.
EN
From 2025, textile waste will have to be collected selectively in all European Union countries. The paper presents the probable impact of new regulations on the energy use of textile waste in Poland. The paper presents the complexity of the textile waste fraction, indicating the diversity of materials that make it up. The amount of this waste generated in Poland, currently and in the coming years, was also analyzed. The results of the analysis indicate higher amounts of textile waste than those resulting Hom the provisions of the National Waste Management Plan. The paper also presents the possibilities of recycling the discussed waste. The theoretical energy potential of textile waste generated annually in Poland was also estimated. As it was shown, due to the limited possibilities of recycling textile waste and due to the small impact of new legal regulations on the waste management system, thermal methods will still be responsible for the management of a significant part of this waste.
Purpose: The main aim of the research presented in the article was to identify and categorize the main production waste generated in the textile and clothing industry and their impact on the environment in the context of sustainable development, along with presenting recycling as a solution to the problem of production waste. Nowadays, through newly emerging EU directives, growing population, and consumer lifestyles, and, consequently, the huge amount of waste generated, the waste problem will increase, and it will be increasingly important to look for new solutions to this problem. Design/methodology/approach: The research presented in the article used an analysis of the literature on the textile industry and its impact on the environment, along with an analysis of the generated textile waste in the concept of sustainable development. Findings: Textile and clothing industry is an important factor influencing the sustainable development of the economy both in the world and in Poland. In the light of the newly established EU directives, this will be a very important issue in the future, which will require urgent attention to this topic and finding optimal solutions in the context of sustainable development or the circular economy. Based on the report results, there has already been a significant change in the behavior and ecological awareness of Poles over recent years. Research limitations/implication: Future research will continue material recovery during physical and chemical recycling. Practical implications: The article presents a review of research on the diversity of waste from the textile and clothing industry in Poland, which shows the importance and scale of the problem and allows for further research on the management of the generated waste. The author also collected data from a nationwide report on Polish people approach to clothing recycling, which she presented in the article, but they require a broader and more detailed analysis. Originality/value: Based on the analysis of available literature, the article shows the scale of the problem, which is an urgent problem and an important future issue thanks to the new EU directives on sustainable development and the circular economy. Additionally, data was collected regarding a report on Poles' approach to recycling, which highlights the consumer trend in environmental protection.
3
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
Zarysowano problem gospodarki odpadami tekstylnymi w świetle propagowanego na świecie modelu biznesowego fast fashion. Realizowany obecnie sposób unieszkodliwiania tego rodzaju odpadów poprzez recykling materiałowy staje się nieefektywny wobec coraz to większego strumienia takich zanieczyszczeń wprowadzanego do środowiska oraz dodawania do wyrobów bawełnianych włókien syntetycznych wydłużających ich czas składowania w środowisku. Przedstawiono alternatywny model postępowania, w którym odpady bawełniane poddawane są hydrolizie kwasowej, a hydrolizaty po neutralizacji wykorzystywane są jako medium fermentacyjne do hodowli drożdży w kierunku etanolu lub białka mikrobiologicznego.
EN
An alternative waste textile treatment model was developed, where cotton waste was subjected to acid hydrolysis. The hydrolysates were neutralized and used as a fermentation medium for yeast culture to produce EtOH or microbial protein.
Failures that occurred in the last few decades highlighted the need to raise awareness about the emergent risk related to the impact localised degradation phenomena have on embankments. Common interventions aimed to improve embankments, such as the reconstruction of the damaged area or the injection of low-pressure grouts to fill fractures and burrows, may cause the weakening of the structure due to discontinuities between natural and treated zones. Moreover, since such repair techniques require huge volumes of materials, more sustainable solutions are encouraged. At the same time, the textile and fashion industries are looking for sustainable waste management and disposal strategies to face environmental problems concerned with the voluminous textile waste dispatched to landfills or incinerators. The use of soil mixed with textile waste in embankment improvement has been investigated to identify an effective engineering practice and to provide a strategy for the circular economy of textiles. Preliminary laboratory tests have been conducted on soil specimens collected from the Secchia River embankment, Northern Italy, to define the appropriate mixture proportions and to compare physical properties and hydro-mechanical behaviour of natural and treated soils. The results show that an appropriate fibre content offers manageable and relatively homogeneous mixtures. The indluence on soil consistency is mainly due to the textile fibre hydrophilic nature. The addition of fibres reduces the maximum dry density and increases the optimum water content. At low stress levels, the compressibility and hydraulic conductivity appear higher, however macro voids produced during sample preparation may alter the findings.
5
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
The textile industry's negative impact on the environment, with the simultaneous global increase in textiles consumption, is associated with the need to implement a circular economy that will reduce the consumption of water, energy, and primary raw materials. Currently, the main goal of these activities is to return to good design and production practices, allowing the creation of durable, high-quality textile products. Another challenge is the intensification of textile recycling, allowing waste to be reused as raw materials. The main goal is the implementation of effective textile waste collection systems and the expansion of chemical and mechanical recycling processes application. The basic tool accelerating the above-mentioned changes is the appropriate legislation, which will force producers to apply ecological solutions and extend their responsibility for textile products. The social factor also has a significant impact on closing the loop in the textile industry. Consumer behavior affects both the amount of waste generated and the way it is reused or processed.
PL
Negatywny wpływ przemysłu włókienniczego na środowisko, przy jednoczesnym globalnym wzroście zużycia tekstyliów, wiąże się z koniecznością wdrożenia gospodarki o obiegu zamkniętym (GOZ), która zmniejszy zużycie wody, energii i surowców pierwotnych. Obecnie głównym celem tych działań jest powrót do dobrych praktyk projektowych i produkcyjnych, pozwalających na tworzenie trwałych wyrobów tekstylnych o wysokiej jakości. Kolejnym wyzwaniem GOZ jest intensyfikacja recyklingu tekstyliów, pozwalająca na ponowne wykorzystanie odpadów jako surowców. Głównym działaniem w tym zakresie jest wdrożenie efektywnych systemów zbiórki odpadów tekstylnych oraz rozszerzenie stosowania procesów recyklingu chemicznego i mechanicznego. Podstawowym narzędziem przyspieszającym powyższe zmiany jest odpowiednia legislacja, która wymusi na producentach stosowanie rozwiązań ekologicznych i rozszerzy ich odpowiedzialność za wyroby włókiennicze. Istotny wpływ na zamykanie obiegu w branży włókienniczej ma również czynnik społeczny. Zachowania konsumentów wpływają zarówno na ilość wytwarzanych odpadów, jak i sposób ich ponownego wykorzystania lub przetwarzania.
Currently, the design of garment styles is weakly supporting the MWD concept. It is kept fixed during all its very changeable manufacturing process, thereby increasing pre- and post-consumer fabric wastes. To improve the situation the final values of construction parameters which influence fabric use efficiency should be determined for every unique production order only in the garment manufacturing process. Four garment styles were tested to see how light changes in their width and length influence fabric use efficiency. Even minimal reduction of these parameters can give noticeable fabric savings. Different values of these parameters create slightly different shapes of pattern pieces, and with it, give a huge number of new possibilities to create more efficient production markers. The authors found a way how to make the garment designing process more efficient, as well as, to create a “virtual bridge” between garment designing and the manufacturing phase. Both improvements could give serious benefits: reduced fabric use and product price, as well as, reduced pre- and post-consumer textile material wastes.
In the current research, waste from woollen yarn production was analysed. Woollen yarn waste as raw material was used for the production of soft thermal insulation mats. Two types of mats were produced in a textile plant: thermally untreated and thermally treated. Properties such as the fibre composition, structure, and thermal conductivity of the thermally untreated and thermally treated mats were studied. During the composition analysis of the woollen yarn waste, the quantity of long, medium length, and short fibres was determined. The content of fats, salts, and other organic and synthetic impurities was investigated. The micro and macrostructures and contact zones between the fibres and the binding material were analysed. The dependences of the thermal conductivity on the density of the thermally untreated and thermally treated composites were obtained.
The current study focused on the use of textile industry waste (cotton and jute) and glass fabric for the development of hybrid composites. Composites were fabricated using either a single reinforcement or different fractions of cotton, jute and glass fabric. A good fibre-matrix interface was observed using Scanning Electronic Microscopy (SEM). The mechanical performance of the composites developed was analysed under certain loads. The tensile and flexural properties of the composites developed from waste material was found lower as compared to the glass fiber composites, while hybrid composites had comparable properties. Regression equations were also developed to predict the mechanical properties of the hybrid composites. Dynamic Mechanical Analysis (DMA) results revealed that after some pre-treatment (mercerization and desizing) textile waste materials can be used with virgin material in the reinforcement part of the composite to decrease the cost, but with optimum mechanical properties.
PL
Przeprowadzone badania koncentrowały się na wykorzystaniu odpadów włókienniczych (bawełna i juta) oraz wyrobów z włókien szklanych do rozwoju kompozytów hybrydowych. Otrzymane kompozyty poddano ocenie przy użyciu skaningowej mikroskopii elektronowej (SEM), a także zbadano ich właściwości mechaniczne. Wytrzymałość na rozciąganie i zginanie kompozytów wytworzonych z materiału odpadowego były niższe w porównaniu z kompozytami z włókna szklanego, podczas gdy kompozyty hybrydowe miały porównywalne właściwości. W celu przewidywania właściwości mechanicznych kompozytów hybrydowych opracowano równania regresji. Wyniki dynamicznej analizy mechanicznej (DMA) wykazały, że po pewnym wstępnym przygotowaniu (merceryzacja i usuwanie klejonki) odpady włókiennicze mogą być z powodzeniem stosowane w połączeniu z nieużywanym materiałem w części wzmacniającej kompozytu, przyczyniając się do zmniejszenia kosztów produkcji, przy zachowaniu optymalnych właściwości mechanicznych kompozytów. Wytwarzanie kompozytów hybrydowych może śmiało przyczynić się do rozwiązania problemów związanych z usuwaniem odpadów tekstylnych.
W niniejszym artykule zaprezentowano wyniki badań podstawowych właściwości paliwowych dla poliamidowego odpadu tekstylnego, pod kątem możliwości jego energetycznego wykorzystania w przemyśle cementowym. Wyzwaniem współczesnej cywilizacji jest przemyślana gospodarka odpadami. Rozwój gospodarczy oraz przemysłowy powoduje gwałtownie wzrastającą ilość odpadów na całym świecie. Istnieje wiele sposobów pozwalających na ich redukcję, czerpiąc tym samym korzyści gospodarcze. Jedną z możliwości wykorzystania odpadów tekstylnych jest określenie ich energetycznego potencjału. Cementownie wykorzystują paliwa z odpadów jako samodzielne paliwo bądź jako jeden z jego komponentów w zależności od ich indywidualnych wymagań.
EN
This article presents the results of research into the basic fuel properties of polyamide textile waste in terms of its potential for energy use in the cement industry. The challenge of modern civilization constitutes reasonable waste management. Economic and industrial development is causing a sharp increase in the amount of waste worldwide. There are many ways in which this can be reduced, and thus bringing economic benefits. One way of using textile waste is to identify its energy potential. Cement plants use waste fuels as an independent fuel or as one of its components, depending on their individual requirements.
Przedstawiono wyniki badań pirolizy w złożu stałym odpadów tekstylnych zawierających włókna syntetyczne, głównie poliestrowe. Ustalono optymalną temperaturę procesu (600°C) i scharakteryzowano jakość produktów stałych, ciekłych i gazowych. Wszystkie produkty charakteryzują się korzystnymi parametrami energetycznymi. Karbonizat poddano procesowi aktywacji ditlenkiem węgla i parą wodną w temperaturze 900°C. Uzyskano sorbenty węglowe o powierzchni BET równej 487 i 974 m²/g. Stwierdzono, że podczas pirolizy odpadów tekstylnych zawierających włókna syntetyczne można uzyskać interesujące prekursory adsorbentów węglowych.
EN
The results of investigations on fixed bed pyrolysis of textile waste containing synthetic fibers, especially polyester, have been presented. The optimum process temperature was found (600°C) and quality of solid, liquid and gas products has been determined. All products are characterized by favorable energetic parameters. The char has been activated by carbon dioxide and steam at 900°C. There have been obtained carbon sorbents of BET surface area equal to 487 and 974 m²/g. It has been found that during the pyrolysis of waste textiles containing synthetic fibers one can obtain interesting precursors of carbon adsorbents.
The efficiency of the decomposition of pollutants in textile wastewater has been determined by the Fenton method in the presence of iron nanocompounds and the results have been compared with those by the classical Fenton method. The wastewater was purified with ferrous sulfate and ferrous sulfate with the addition of iron(II, III) nanocompound. The effect of optimization of the process was examined by adding various amounts of ferrous sulfate and iron(II, III) nano-oxide, hydrogen peroxide and changing pH of the solution. It was found that addition of iron nano-oxide in the presence of ferrous sulfate increased the efficiency of pollutant decomposition in the wastewater.
Effective utilisation of textile waste requires an accurate prediction of the quality of waste generated. Textile waste in Macedonia mainly consists of apparel cuttings. The aim of this research was to characterize the apparel cuttings waste, define the current state of apparel waste management and the potential barriers against introducing efficient waste management systems. Data was obtained via a structured questionnaire distributed to top managers in apparel manufacturing companies. The results indicated that almost all apparel manufacturers use landfills to dispose of their waste. The analysis showed that the waste stream consisted principally of woven fabrics, predominately cotton and cotton blends, with the presence of lycra. Bearing in mind the waste composition, the most appropriate end use for the pre-consumer waste produced is insulation materials. Considering that the industry consists of small and medium companies with limited resources, there is a low likelihood of individual investments in recycling equipment.
PL
Efektywna utylizacja odpadów tekstylnych wymaga dokładnego przewidywania jakości generowanych odpadów. Odpady odzieżowe Macedonii tworzone są głównie przez ścinki odzieżowe. Celem badań było scharakteryzowanie ścinków, ustalenie odpowiednich metod zarządzania odpadami i identyfikacja barier wpływających na efektywność systemu zarządzania odpadami. Odpowiednio opracowane kwestionariusze zostały rozprowadzone wśród zarządów tekstylnych zakładów produkcyjnych. Wyniki wskazują, że prawie wszyscy wytwórcy tekstyliów stosują wysypiska dla rozdysponowania swoich odpadów. Analiza wykazała, że strumienie odpadów składają się głównie z tkanin, w tym przeważnie bawełnianych, i z mieszanek bawełny z lycrą. Biorąc pod uwagę ten skład materiałów odpadowych, wydaje się, że najbardziej odpowiednim zastosowaniem może być produkcja materiałów izolacyjnych. Ponieważ przemysł przetwórczy skalda się głównie z małych i średnich przedsiębiorstw istnieje małe prawdopodobieństwo zakupu odpowiednio dużych maszyn przetwarzających.
Już w XVIII w. na terenie Polski pozyskiwano i wykorzystywano odzież używaną. Świadczy o tym edykt wydany w 1777 r., obowiązujący na terenie Wielkopolski, nakazujący wykorzystywanie m.in. „gałganów” włókienniczych. Rozbudowujący się w XIX w. przemysł włókienniczy w Łodzi, Bielsku-Białej i Białymstoku w dużym stopniu opierał się na odpadach poużytkowych, pozyskiwanych różnymi sposobami. Poużytkowe wyroby włókiennicze także po II wojnie światowej stanowiły znaczącą bazę dla przemysłu włókienniczego. Służyły do produkcji tkanin zgrzebnych, a po rozwinięciu się technik wyrobów nietkanych – do wytwarzania włókien oraz wykładzin. Pojawienie się na rynku dużo tańszych włókien chemicznych spowodowało wypieranie włókienniczych surowców wtórnych, których pozyskiwanie i uzdatnianie kosztowało coraz więcej. Znakomite parametry technologiczne włókien chemicznych pozwalały na osiągnięcie znacznych wskaźników wydajności, a w konsekwencji na wyparcie włókna wtórnego tym razem z produkcji włókien i wykładzin. Jednocześnie bardzo ograniczono zużycie włókienniczych surowców wtórnych w przemyśle celulozowo-papierniczym. Przeobrażenie naszej gospodarki z nakazowo-rozdzielczej na rynkową oraz urealnienie cen, także czynszów za lokale i taryf przewozowych, doprowadziło do likwidacji większości punktów skupu surowców wtórnych.
16
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
Artykuł stanowi kontynuację tematyki dotyczącej metod zagospodarowania odpadów tekstylnych. Omawia zagadnienia ich termicznego przekształcania, które może być alternatywą dla recyklingu materiałowego, szczególnie przy znacznym zróżnicowaniu, rozproszenie, zanieczyszczeniu i zużyciu odpadów włókienniczych. Wysoka wartość opałowa odpadów tekstylnych umożliwia ich wykorzystanie energetyczne poprzez zastosowanie jako dodatek do innych odpadów (o gorszych właściwościach paliwowych) lub do paliw konwencjonalnych. Mogą być spalane razem z paliwem węglowym w piecach cementowych, co oprócz odzysku energetycznego przyczyni się do zminimalizowania emisji i uciążliwości środowiskowych związanych z tym kierunkiem przekształcania odpadów. Stosowanie paliw zastępczych (alternatywnych) jest zgodne ze światowym trendem, dążącym do oszczędności tradycyjnych surowców energetycznych oraz zagospodarowania energii zgromadzonej w odpadach. Każdorazowo przygotowaną partię paliwa, przed transportem do odbiorcy, należy poddać badaniom określającym właściwości paliwowe (w tym zawartość chloru).
EN
The article is a continuation of the subject concerning the methods of textile waste. It discusses the thermal treatment, which can be an alternative for material recycling, especially when the waste is greatly varied, distributed, contaminated and used. High calorific value of textile waste enables its energy use by the application as a supplement to other waste ( of the inferior fuel properties) or to conventional fuels. It can be incinerated together with coal fuel in cement kilns what, in addition to energy recovery, will help to minimize emissions and environmental nuisances associated with this direction of waste treatment. The use of alternative fuels is in accordance with the global trend, striving for the savings of traditional energy resources and the management of energy stored in the waste. Each batch of fuel should be tested determining the fuel properties (including chlorine content) before transporting to the recipient.
17
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
Artykuł omawia zagadnienia dotyczące metod zagospodarowania odpadów tekstylnych. Stanowi kontynuację tej tematyki (charakterystyki odpadów włókienniczych) i dotyczy metod postępowania z nimi, począwszy od przygotowania do powtórnego użycia i recyklingu materiałowego, poprzez inne formy odzysku, aż do unieszkodliwiania. Stanowi przegląd metod zagospodarowania włókienniczego oraz pozawłókienniczego odpadów tekstylnych, przede wszystkim poprzez wytwarzanie przędz i tkanin, produkcję włóknin, regranulatów, wykorzystanie w przemyśle papierniczym, budownictwie, rekultywacji itp. Metody zagospodarowania muszą być zgodne z hierarchią postępowania z odpadami. Jej przestrzeganie daje możliwość ograniczenia negatywnego wpływu na środowisko, jak również optymalnego wykorzystania substancji zawartych w odpadach tekstylnych.
EN
The article discusses the issues related to the treatment methods of textile waste. It is a continuation of this subject (characteristics of textile waste) and applies the methods of dealing with such waste, from the preparation for reuse and material recycling through other forms of recovery and treatment. It is an overview of the textile methods and not textile methods of waste management, such as the production of yams and fabrics, nonwovens production, granules production, the use in the paper industry, in construction and land reclamation, etc. The methods must be in accordance with the waste hierarchy. It gives the opportunity to reduce the negative impact on the environment, as well as the optimal use of the substances contained in waste textiles.
18
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
Niniejszy artykuł omawia zagadnienia dotyczące właściwości odpadów tekstylnych, sposobu ich klasyfikacji, charakterystyki ilościowej i jakościowej. Odpady tekstylne (włókiennicze) to odpady powstające z tekstyliów czyli z wyrobów uzyskiwanych z surowców włókienniczych. Znajomość rodzajów i charakterystyki odpadów tekstylnych jest istotna m.in. przy projektowaniu prawidłowych rozwiązań w zakresie ich zagospodarowania. Właściwości odpadów tekstylnych wskazują na możliwość zastosowania różnych metod ich zagospodarowania, z uwzględnieniem zarówno recyklingu materiałowego, jak i innych form odzysku. Znaczne zróżnicowanie i rozproszenie odpadów tekstylnych stwarza jednak problemy w ich rozpoznaniu oraz rozdzielaniu i sortowaniu, a tym samym powoduje utrudnienia w systemie ich zagospodarowania.
EN
This article discusses issues related to the properties of textile waste, a method of its classification, quantitative and qualitative characteristics. Textile waste is the waste which arises from textiles or from products obtained from textile raw materials. Knowledge of the types and characteristics of this stream of waste is necessary for defining the proper solutions of management methods. Properties of textile waste indicate a possibility to use different methods of management, taking into account both material recycling and other forms of гесоvегу. Significant diversification and dispersal of textile waste, however, present problems in their diagnosis, separation and sorting, and thus causes difficulties in the management system.
Effective utilisation and disposal of textile wastes requires an accurate prediction of solid waste generation. This research predicted the waste quantity generated in households and in industrial facilities in Turkey via surveys, factory research and official databases. Recycling methods, products and the profile of recycling sector were investigated. Approximately 884,890 tonnes of textile waste was generated in 2009. Dialogue problems between manufacturers and recyclers as well as a lack of collection of post-consumer waste were the main reasons for the low recycling ratio.
PL
Efektywna utylizacja odpadów i ich dystrybucja wymaga dokładnego przewidywania ilości produkowanych poszczególnych rodzajów odpadów. W artykule przedstawiono przewidywanie powstawania odpadów tekstylnych w przemyśle i gospodarstwach domowych. Badano również sposoby recyklingu. W 2009 roku wyprodukowano w Turcji ok. 884,890 ton odpadów tekstylnych. Główną przyczyną małej ilości recyklingowanych odpadów jest złe porozumienie pomiędzy producentami i przedsiębiorstwami prowadzącymi recykling.
W krajach wysoko rozwiniętych wytwarza się ok. 25 mln ton odpadów tekstylnych rocznie (5-7 kg/osobę/rok), z czego większość to odpady poużytkowe. Ok. 40 % z nich to odpady nieodzieżowe (dywany, pokrycia mebli, siedzisk samochodowych, kotary, firany itp.).
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.