Ograniczanie wyników
Czasopisma help
Autorzy help
Lata help
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 29

Liczba wyników na stronie
first rewind previous Strona / 2 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  teeth
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 2 next fast forward last
EN
The tooth microstructure of Metoposaurus krasiejowensis was studied to observe external morphology, internal microstructure (comprising dentine structure and directional porosity as possible predatory adaptations) and enamel/enameloid mineral composition. Scanning electron microscopy (SEM) observation and thin-section inspection by light microscope enabled us to recognize a directional porosity in the tooth cross-sections, interpreted here as a part of the labyrinthodont structure displayed by temnospondyls and related groups. This network of canals is highly complicated and reveals a three-dimensional structure. The teeth present different cross-sections based on the distance from the tip, with a wide, circular, reinforced base and lateral compressed, directional cuspidal section with cutting edge. Interestingly, the internal structure observed in M. krasiejowensis teeth exhibit a peculiar variation of internal structure of temnospondyl teeth, as the convoluted canal-like structure seems to be irregular and appears in the upper section of teeth, while teeth bases show a regular structure with a pulpal cavity circled by pores. Furthermore, bands of incremental growth marks interpreted as Andresen lines, characterized by pronounced colour variation, were observed with strong implications for seasonal growth patterns in dentine. Additionally, a significant proportion (1.43–2.73%) of fluoride was observed as a component of enamel by scanning electron microscopy–energy dispersive spectroscopy (SEM–EDS) point and mapping analyses, suggesting a fluorapatite mineralogy of enamel.
EN
Composite materials are used in dentistry to rebuild hard tissues of teeth, destroyed by caries disease. Composites intended for dental direct fillings are polymerized with visible light generated by polymerization lamps. The temperature changes during polymerization can be measured within method like thermography. The study used 20 molars without caries, removed from orthodontic indications, A thermal imaging camera was used to test the temperature distribution of composite materials during the polymerization process. The work was taken up about the possibility of imaging the temperature distribution during the polymerization process of composite fillings in human teeth tissues. Temperature distribution was analyzed at specific locations of tooth tissues, particularly in terms of heat migration towards pulp. At the sites of separation of tooth materials and tissues, an attempt was made to assess the hardness of fillings and tissues. It can be concluded that the temperature during test did not exceed 42 °C, at which the tooth pulp is damaged. During cooling, heat spreads through the filling, not through the tooth tissues. Bulkfill did not show a difference in fill hardness regardless of the distance of the light source but GC composite hardness depends on the distance of the light source.
EN
Fossil bear material from the lowermost deposits of the Jasna Strzegowska cave is described and its taxonomic status assessed. Comparison with bear remains from other Early and early Middle Pleistocene localities of Eurasia shows the presence of two bear species: Ursus etruscus and U. deningeri, based on morphological and size characters of the teeth and postcranial bones. The teeth of U. deningeri from the Jasna Strzegowska cave are larger, wider and have much more complicated occlusal surfaces when compared with the teeth of U. etruscus. Both bear species are characterized by relatively short and robust metapodials, although those of U. etruscus are on average less massive. Some differences in muscle attachments and articular surfaces have also been found. Metapodials of primitive arctoid bears, that co-occurred with U. etruscus and U. deningeri, are much longer and slimmer. U. etruscus and U. deningeri probably did not live in the Jasna Strzegowska cave at the same time. Based on its time range in Eurasia and morphological characteristics, the age of U. etruscus is estimated as Early Pleistocene, between 1.8-1.3 Ma. This is its first description from Poland, and the remains described are in size and morphology indistinguishable from material from other European localities. For U. deningeri, an early Middle Pleistocene age is suggested.
EN
Stable isotope analyses of oxygen are used in anthropology for such purposes as determination of origin of individuals, tracking migration routes or dynamics of human community relocation. The methodology related to oxygen isotope analysis has been founded on the relationship between its isotopic composition within phosphate groups of bone tissue (δ18Op) in individuals being analysed and the water consumed by such individuals (δ18Ow). Such a relationship has been observed in many species of mammals, including humans. However, the influence of culinary practices on the isotopic delta values of apatite phosphates of individuals has not yet been researched. The present study, which was conducted using laboratory rats, is an investigation of the influence of the thermal processing of water drank by such rats on the isotopic composition (δ18Op) of bone apatite. Increasing the value of the isotopic composition of water by about 6.1 ‰ during boiling resulted in an increase in the oxygen isotopic value δ18Op of rats drinking the water by about 4 ‰ (29%). It can be expected that regular consumption of heavily isotopic drinks and foods by humans may cause the δ18Op of individuals to exceed the range of isotopic environmental variability, even by a few per mille.
EN
This article presents the algorithm for the selection of the optimal number of teeth for a biplanetary bevel gear. This transmission device is mainly used in working parts of mining combines and agricultural machines as well as in differential mechanisms of complex mechanical drives. In the systematic search, we used an algorithm for generating induction decision trees, based on entropy growth as a method related to machine learning. A series of tests is performed in a sequence of trees. Other methods may be used, e.g. the „2-3 tree” method, the “digital search tree” or the “AVL tree method”.
6
Content available Biomineralogia zębów mumii egipskich
PL
W dotychczasowej literaturze niewiele jest wiadomości dotyczących mineralogicznych badań zębów pochodzących ze starych cmentarzysk takich jak np. groby mumii egipskich. Prezentowana publikacja uzupełnia w zakresie badań mineralogicznych wiedzę dotycząca przyżyciowych i pośmiertnych zmian w zębach ludzi Starego i Nowego Państwa Egipskiego. Ukazuje ona zjawiska zachodzące w historycznych zębach, które są zbliżone do zjawisk współczesnych. Wykonano ją na kilkunastu zębach, prezentując w publikacji jedynie wybrane, szczególnie ciekawe zjawiska.
EN
In the literature so far, there has been little information on mineralogical studies of teeth from old cemeteries, such as the tombs of Egyptian mummies. This publication adds to the knowledge in the field of mineralogical studies regarding vital and posthumous changes in the teeth of the people of Old and New Kingdom of Egypt. It shows the phenomena occurring in historical teeth, which are similar to those occuring in modern times. The research was conducted on approximately a dozen teeth, and the publication presents only selected, particularly interesting phenomena.
EN
Brachauchenine pliosaurids were a cosmopolitan clade of macropredatory plesiosaurs that are considered to represent the only pliosaurid lineage that survived the faunal turnover of marine amniotes during the Jurassic–Cretaceous transition. However, the European record of the Early to early Late Cretaceous brachauchenines is largely limited to isolated tooth crowns, most of which have been attributed to the classic Cretaceous taxon Polyptychodon. Nevertheless, the original material of P. interruptus, the type species of Polyptychodon, was recently reappraised and found undiagnostic. Here, we describe a collection of twelve pliosaurid teeth from the upper Albian–middle Cenomanian interval of the condensed, phosphorite-bearing Cretaceous succession at Annopol, Poland. Eleven of the studied tooth crowns, from the Albian and Cenomanian strata, fall within the range of the morphological variability observed in the original material of P. interruptus from the Cretaceous of England. One tooth crown from the middle Cenomanian is characterized by a gently subtrihedral cross-section. Similar morphology has so far been described only for pliosaurid teeth from the Late Jurassic and Early Cretaceous. Even though it remains impossible to precisely settle the taxonomic distinctions, the studied material is considered to be taxonomically heterogeneous.
9
EN
In contrast to mammalian teeth with the biomineral phase hydroxyapatite, the shark teeth contain harder mineral phase fluoroapatite with partial substitutions of phosphate by carbonate and of fluoride by hydroxide [1]. Their excellent mechanical properties are due to a special hierarchical structure of the constituting fluoroapatite crystals and organic matrix [2]. The two main structural elements of teeth, i.e. hard and mineral-rich enameloid on the outside and softer and less mineralized dentin on the inside, were structurally, chemically and mechanically characterized [3]. The teeth of two different shark species mako shark (Isurus oxyrinchus) and tiger shark (Galeocerdo cuvier) were investigated and their hierarchical structure by high-resolution scanning electron microscopy presented (Fig.1). X-ray diffraction showed that the inorganic matrix of both enameloid and dentin consisted of fluoroapatite, with a high crystalline phase in enameloid and nanocrystalline phase in dentin. FTIR-spectra of the shark teeth showed the characteristic bands of biological apatite. It was found by thermogravimetry that dentin had a higher content of water, organic matrix and carbonate than enameloid. To investigate the mechanical properties of the teeth in longitudinal and cross sections, nanoindentation and Vickers microhardness were carried out. Both methods gave comparable results: the enameloid of both shark teeth was approximately six times harder than the dentin with an isotropic hardness (longitudinal or cross section).
EN
An unusual large teeth, finding from time to time in marine sediments of Muschelkalk, Silesia, Poland indicate the superpredators occurrence. According to size and morphological features the teeth are similar to archosaurs or giant marine reptiles.
EN
Scraper conveyors are one of the key machines forming part of mechanised longwall systems. They are currently the only means of transporting the mined rock from longwalls in hard coal mines. The hauling force caused by the drive is transmitted onto a link chain through drive wheels with their external shape corresponding to a geometric polygon. The number of teeth (seats) in such wheels ranges between 5 and 8. The horizontal links running on the drum are arranged in the drive wheel seats and are meshing with the teeth segments. The geometric relationships between the sprocket drum and the links are decisive for the position of the chain links in the seats. The abrasive wear of the chain parts and of the drive drum parts occurring due to conveyor operation is increasing the chain pitch and decreasing the wheel pitch. The position of a link in the seats changes as a result along with the load on the sprocket drum teeth and seats. Sprocket drums are the weakest element in longwall conveyors. It is, therefore, urgently necessary to determine the dynamic loads of such drums’ teeth and seats. The article presents a physical model and a mathematical model of a longwall conveyor created for the purpose of determination of dynamic loads of the sprocket drum teeth and seats. The results of computer simulations are also presented (dynamic loads: in chains, dynamic loads of sprocket drums and dynamic loads of sprocket drums’ teeth and seats) carried out using the created mathematical model for a 350 m long face conveyor.
PL
Koncentracja produkcji węgla kamiennego wymusza potrzebę prowadzenia intensywnych badań maszyn górniczych w aspekcie zwiększenia ich niezawodności i żywotności. Jedną z podstawowych maszyn wchodzących w skład ścianowych kompleksów zmechanizowanych są przenośniki zgrzebłowe. Przenośniki zgrzebłowe ścianowe są obecnie jedynymi środkami odstawy urobku z wyrobisk ścianowych w kopalniach węgla kamiennego. W czasie swojego rozwoju wyposażane były w różne typy łańcuchów pociągowych, z których najlepszym okazał się łańcuch ogniwowy. Przenośniki ścianowe mogą być wyposażone w jeden łańcuch, dwa łańcuchy skrajne, trzy łańcuchy lub dwa łańcuchy środkowe, przy czym ostatnie rozwiązanie stosowane jest najczęściej. Siła uciągu wywołana napędem przekazywana jest łańcuchowi poprzez koła napędowe, które mają postać geometryczną wieloboku i wyposażone są najczęściej w 5÷8 zębów (gniazd). Ogniwa poziome nabiegające na bęben układają się w gniazdach koła napędowego i wchodzą w zazębienie z segmentami zębów. O położeniu ogniw łańcucha w gniazdach decydują relacje geometryczne pomiędzy bębnem łańcuchowym a ogniwami. Zużycie ścierne elementów łańcucha i bębna napędowego następujące na skutek eksploatacji przenośnika powoduje zwiększenie podziałki łańcucha i zmniejszenie podziałki koła. W efekcie zmienia się zarówno położenie ogniw w gniazdach jak i obciążenie zębów i gniazd bębna łańcuchowego. Obecnie najsłabszym elementem w przenośnikach ścianowych są bębny łańcuchowe. Zachodzi zatem pilna potrzeba poznania obciążeń dynamicznych zębów i gniazd tych bębnów. Dla potrzeb wyznaczania obciążeń dynamicznych zębów i gniazd bębna łańcuchowego został rozbudowany model fizyczny i matematyczny przenośnika ścianowego o elementy zazębienia łańcuchowego. Dyskretny model fizyczny i matematyczny przenośnika ścianowego zbudowano wcześniej i wielokrotnie zweryfikowano go doświadczalnie. Po rozbudowaniu o elementy zazębienia łańcuchowego model fizyczny przyjmuje postać jak na rysunku 1. Ruch w tym rozbudowanym modelu fizycznym opisuje układ nieliniowych równań różniczkowych zwyczajnych drugiego rzędu (wzory 1, 2 i 3). Podczas współdziałania bębna łańcuchowego o wymiarach normowych z łańcuchem o wydłużonej podziałce nabiegające ogniwo poziome nie styka się z dnem gniazda na całej swej długości. Ten wariant zazębienia charakteryzuje się tym, że ogniwa poziome łańcucha znajdujące się na kole gniazdowym o liczbie zębów z są nachylone względem den gniazd pod kątem ε tak, że ich torusy przednie stykają się dnami gniazd a torusy tylne stykają się z bokami roboczymi segmentów zębów koła o kącie pochylenia względem dna gniazda β. W celu jednoznacznego opisu położenia ogniw łańcucha w gniazdach koła wyznaczono parametry ε, u i αu (rys. 2). Przy analizowaniu współdziałania bębna łańcuchowego z łańcuchem ogniwowym uwzględniono zjawisko ruchliwości ogniw w przegubach podczas wzajemnego przechylania ogniw, którego następstwem jest przemieszczanie się punktu styku ogniw. Przechylaniu ogniwa poziomego względem ogniwa pionowego towarzyszy toczenie się ogniwa poziomego względem ogniwa pionowego w wyniku panującego w przegubie tarcia lub poślizg ogniw w przegubie w zależności od wartości modułu przegubu mp i wartości współczynnika tarcia w przegubie μp. Podczas toczenia ogniwa poziomego w przegubie następuje przemieszczanie się punktu styku ogniw w przegubie, zaś podczas poślizgu ogniwa poziomego położenie punktu styku w przegubie ogniwa pionowego pozostaje bez zmian. Ze względu na powtarzalność położenia ogniw w gniazdach koła łańcuchowego o liczbie zębów z podczas ich nabiegania następuje cykliczne obciążanie kolejnych den gniazd, flanek zębów i ogniw łańcucha siłami w czasie obrotu bębna łańcuchowego o kąt podziałowy φ = 2π/z. Podczas analizy obciążenia elementów bębna łańcuchowego przyjęto zmienność kąta obrotu bębna od chwili zetknięcia się torusa przedniego nabiegającego ogniwa poziomego z dnem gniazda (φ = 0) do chwili zetknięcia się torusa przedniego kolejnego ogniwa poziomego z dnem następnego gniazda (φ = 2π/z). W zakresie obrotu bębna łańcuchowego o kąt podziałowy wyróżniono trzy przedziały charakteryzujące się odmiennym sposobem obciążenia elementów bębna łańcuchowego (P1, P2 i P3 na rys. 1). Wzory od (4) do (39) opisują obciążenia dna gniazda i flanki zęba bębna łańcuchowego w tych przedziałach. Utworzony model matematyczny pozwolił na komputerowe wyznaczenie obciążeń dynamicznych łańcuchów, bębnów napędowych oraz zębów i gniazd bębnów łańcuchowych w przenośniku ścianowym o długości 350 m (rys. 3÷8). W czasie badań symulowano stan nieluzowania łańcuchów i stan stałego luzowania. Na podstawie przeprowadzonych badań komputerowych ruchu ustalonego ścianowego przenośnika zgrzebłowego, wyposażonego w bębny łańcuchowe o liczbie zębów z = 8, obciążonego urobkiem węglowym na całej długości sformułowano następujące wnioski: 1. Wydłużenie podziałki łańcucha, w praktyce spowodowane głównie zużyciem ściernym przegubów ogniw, powoduje osiadanie torusa tylnego ogniwa poziomego coraz wyżej na flance zęba (wzrost wartości kątów ε oraz αu ). Prowadzi to do skracania czasu od chwili zetknięcia się torusa przedniego ogniwa poziomego z dnem gniazda do chwili zetknięcia się torusa tylnego tego ogniwa z flanką zęba. Konsekwencją tego jest zmniejszanie się wartości maksymalnej obciążenia dna gniazda w punkcie styku z torusem przednim ogniwa oraz wzrost maksymalnej wartości wymaganej siły tarcia zapobiegającej poślizgowi torusa tylnego po flance zęba zarówno w stanie stałego luzowania jak i w stanie nieluzowania łańcucha. 2. Stosunek maksymalnej wartości siły obciążającej flankę zęba w punkcie styku z torusem tylnym ogniwa do maksymalnej wartości siły obciążającej dno gniazda w punkcie styku z torusem przednim ogniwa oraz stosunek maksymalnej wartości wymaganej siły tarcia zapobiegającej poślizgowi torusa tylnego po flance zęba do maksymalnej wartości siły obciążającej dno gniazda w punkcie styku z torusem przednim ogniwa rosną nieliniowo ze wzrostem wydłużenia podziałki ogniw. Wzrosty te przebiegają niemal identycznie dla stanu stałego luzowania i stanu nieluzowania łańcucha. 3. Zwiększenie podziałki łańcucha od 1% do 4% spowodowało ponad czterokrotny wzrost wartości maksymalnej siły tarcia zapobiegającej poślizgowi torusa tylnego ogniwa poziomego po flance zęba w stronę dna gniazda. Jeżeli wartość siły tarcia rozwiniętego wywołanego siłą nacisku torusa tylnego ogniwa poziomego na flankę zęba jest co najmniej równa wartości rozpatrywanej siły tarcia to układ sił jest w równowadze. Jeśli natomiast siła tarcia pochodząca od nacisku torusa tylnego na flankę zęba jest mniejsza od wartości tej siły tarcia to następuje poślizg torusa tylnego po flance zęba w stronę dna gniazda. Z tego względu duże wartości rozważanej siły tarcia w miejscu styku torusa tylnego ogniwa poziomego z flanką zęba są niekorzystne, gdyż zwiększają możliwość wystąpienia poślizgu ogniwa po flance zęba co powoduje zwiększenie zużycia ściernego flanki zęba obniżając trwałość bębna łańcuchowego i powodując zmniejszenie sprawności zazębienia łańcuchowego.
12
Content available remote Chondrichthyan microfossils from the Famennian and Tournaisian of Armenia
EN
The assemblages of chondrichthyan microremains from the Famennian of Armenia show great resemblances to those from central Iran. Particularly, the very rich sample (almost 200 teeth) from the lower Famennian of Ertych contains a fauna similar to that from the Iranian section of Hutk, and the sample from the upper Famennian of Khor Virap has its counterpart in the sample from Dalmeh, Iran. Only one chondrichthyan taxon definitely unknown from Iran, Ertychius intermedius gen. et sp. nov., was recorded. The other newly described species, Lissodus lusavorichi sp. nov., was noted earlier from Dalmeh, but at that time was left unnamed. It appears that the same type of relatively shallow marine environment predominated in the central and north-western parts of the Iranian Platform during the Famennian and that in a given time-interval the same type of ichthyofauna was distributed throughout the area. The single lower Tournaisian sample from the Sevakavan section yielded a peculiar form of thrinacodont teeth, possibly intermediate between Thrinacodus tranquillus and Th. ferox.
13
EN
The working elements of agricultural machines for the treatment of soil are exposed to the intensive wear during a run. It is possible to decrease the level of wear by using the proper technology. In this work, we concentrated on the possibility of increasing the wear resistance of surfacing. We tested the resistance of two kinds of surfacing materials in an operational test and compared them with the wear of the basic, untreated material. The comparison was carried out on the basis of lineal proportions and component weight measurements taken before and after the operational test and on laboratory tests of the hardness and metallography. The operational test was conducted on the teeth of a combined cultivator for pre-sowing soil preparation after ploughing or stubble ploughing.
PL
Elementy robocze uprawowych maszyn rolniczych są narażone na intensywne zużycie w czasie pracy. Możliwe jest zmniejszenie poziomu zużycia przy zastosowaniu odpowiedniej technologii. W pracy skoncentrowano się na możliwości zwiększenia odporności na zużycie dla nawierzchni. Przetestowano rezystancje dwóch rodzajów nawierzchni w badaniach eksploatacyjnych i porównano je ze zużyciem materiału (nawierzchni) podstawowego, nie obrabianego. Porównanie zostało zrealizowane w oparciu o pomiar proporcji i wagi elementów przed i po badaniach eksploatacyjnych oraz w trakcie testów laboratoryjnych twardości i metalografii. Badania eksploatacyjne przeprowadzono na zębach kultywatora przeznaczonego do przygotowania gleby przed siewem lub po orce.
PL
W opracowaniu, na podstawie studium literaturowego oraz badań, przedstawiono uwarunkowania, które decydują o fenomenie odporności szkliwa na zużycie. W części pierwszej na podstawie doniesień piśmiennictwa oraz badań dokonano: analizy struktury klinicznie prawidłowego szkliwa i jego parametrów wytrzymałościowych, oceny rozkładu jego grubości na koronach zębów w poszczególnych grupach zębowych oraz analizy zużycia w warunkach obciążeń okluzyjno-artykulacyjnych w środowisku śliny. W części drugiej wykonano badania szkliwa zębów siecznych, przedtrzonowych i trzonowych klinicznie prawidłowych. Badania obejmowały ocenę stereometrii warstwy wierzchniej szkliwa z wykorzystaniem mikroskopii sił atomowych (AFM), wyznaczenie mikrotwardości warstwy wierzchniej z wykorzystaniem metody Oliver & Pharr oraz wyznaczenie odporności szkliwa na ściskanie w testach na maszynie wytrzymałościowej. Na podstawie przeprowadzonej analizy i badań można wnioskować o wielokierunkowym przystosowaniu szkliwa do pełnionych funkcji.
EN
In the study based on literature review and research we presented factors determining a phenomenon of enamel resistance to wear. Based on data in literature and the research the following was made in part one: analysis of regular enamel structure and its performance parameters, assessment of enamel thickness on a dental crown in separate groups of teeth and analysis of wear in conditions of occlusal and articulatory loading in saliva environment. In part two, there were made examinations of enamel in clinically normal incisor, premolar and molar teeth. The examinations included the assessment of enamel superficial layer stereometry using Atomic Force Microscopy (AFM), determination of enamel superficial layer microhardness using Oliver & Pharr method, and determination of enamel compression strength using test machine. It can be concluded, based on conducted analysis and examinations that the enamel adaptation to its functions is many-sided.
PL
W pracy przedstawiono charakterystyki tribologiczne układu kinematycznego ząb - materiał kompozytowy na stałe wypełnienia stomatologiczne. Badaniom poddano własne kompozyty zawierające źródła fluoru, nanokrzemionkę oraz modyfikator tarcia w postaci proszku polietylenu. Badania przeprowadzono przy użyciu specjalnie skonstruowanego testera tarcia zębów typu pin-on-disc w środowisku roztworu o pH śliny. Oceniano wpływ całkowitego obciążenia na współczynnik tarcia zaprojektowanych materiałów kompozytowych oraz zużycie liniowe badanych kompozytów i zużycie objętościowetkanek zęba. Przeprowadzono obserwacje mikroskopowe struktury materiałów kompozytowych po badaniach tarciowych.
EN
The paper presents a tribological characteristics of the kinematics couple: tooth - composite material for permanent dental fillings. Two original composites containing fluorine sources, nanosilica and a friction modifier in the form of polyethylene powder were investigated. The wear tests were carried out in a special solution of saliva pH using a special pin-on-disc tribotester. The impact of total load on the friction coefficient of designed composite materials and linear wear of both the analyzed materials and volume wear of the tooth samples were evaluated. The composites' friction surface including wear particles was examined by SEM.
PL
W pracy zaprezentowano problematykę projektowania i kształtowania uzębień nieokrągłych kół pasowych. Omówiono klasyczne metody wytwarzania kół wskazując ich zalety oraz ograniczenia. Podano podstawowe zależności matematyczne wykorzystane do opisu cech geometrycznych obwiedni kół nieokrągłych. Bogato zilustrowano badania przeprowadzone przez autora w zakresie wytwarzania kół nieokrągłych. Wskazano na brak standaryzacji metod pomiaru cech geometrycznych oraz stereometrii powierzchni kół nieokrągłych.
EN
There was presented issue of design and forming of teeth of noncircular cogbelt pulleys. There were discussed classical manufacturing methods of pulleys and there were pointed their advantages and disadvantages. There were given basic mathematical relationships applied to description of geometrical features of envelope of noncircular pulleys. There were presented researches, which are illustrated in photos, conducted by author in scope of noncircular pulleys production. There was pointed a lack of standardization of measuring methods of geometrical features and surface stereometry of noncircular pulleys.
EN
An assemblage of fifteen taxa of chondrichthyan microremains from late Frasnian through late Famennian pelagic deposits of the Kale Sardar section, eastern Iran, is described. Several taxa (Phoebodus bifurcatus, Phoebodus sophiae and Protacrodus vetustus) are reported for the first time from Iran. The presence of Deihim mansureae and Ph. sophiae in the Late rhenana to linguiformis Zones and Phoebodus rayi in the early triangularis Zone of the Kale Sardar section, provides new biostratigraphic information. The late Frasnian part of the assemblage corresponds to the faunas from the intrashelf basins of central europe, and the middle.late Famennian part is comparable to that from the tafilalt Platform of Morocco.
EN
The studied bones and teeth of the cave bear (Ursus spelaeus) come from the Biśnik Cave, located in the Częstochowa Upland (Southern Poland). The specimens originate from different geological layers formed since the Odra Glaciation (250–270 thousand years BP). The fossilized bones and teeth were studied using optical microscopy, scanning electron microscopy, X-ray diffraction, FTIR spectroscopy, and INAA. They are built of recrystallized carbonate-rich apatite-(CaOH) and/or apatite-(CaOH). The teeth additionally contain some apatite-(CaF). The lack of collagen and minor REE contents suggest rapid burial and collagen decay in the early stage of diagenesis. The bones and teeth have only limited mineral infillings. In some teeth, Mn-Fe (hydroxy)oxides were found in the dentine canaliculi and in bones, some osteocyte lacunae contain Fe (hydroxy)oxides with admixture of Mn. In one bone specimen, calcite infillings are present in Haversian canals. The infillings formed during later stages of diagenesis and were succeeded by non-filled cracks.
PL
Przedstawiono zagadnienia kształtowania metodami przyrostowymi uzębień nieokrągłych kół pasowych stosowanych w nierównobieżnych przekładniach cięgnowych. W procesie tym zastosowano wybrane metody Rapid Prototyping (RP) i Rapid Manufacturing. W zakresie metod szybkiego prototypowania wykonano przykładowe koła techniką FDM oraz 3DP, natomiast jako przykładową technikę RM zastosowano metodę SLS. Wyniki badań cech geometrycznych oraz stereometrii powierzchni wskazują, że metody te mogą być z powodzeniem stosowane w procesie projektowania oraz badań nowych postaci geometrycznych nieklasycznych uzębień zębatych, jakimi są koła nieokrągłe nierównobieżnej przekładni cięgnowej. Podstawową cechą różnicującą te procesy jest to, że elementy wykonane techniką RP przeznaczone są do weryfikacji zaprojektowanych cech geometrycznych i analizy sprzężenia kształtowo-ciernego przekładni nierównobieżnej. Natomiast koła nieokrągłe, powstałe w wyniku przyrostowego kształtowania metodą RM, są z powodzeniem stosowane w przekładni nierównobieżnej z pasem zębatym do sterowania procesami wytwórczymi transportowymi i technologicznymi.
EN
Presented are problems found in forming of teeth in non-circular belt pulleys produced by means of incremental methods for use in variable speed toothed belt transmission mechanisms.
20
Content available remote Famennian chondrichthyan remains from the Chahriseh section, central Iran
EN
A diverse shallow water assemblage of chondrichthyan microremains is described from the Famennian of the Chahriseh section, central Iran. Twenty-two taxa are identified; of these two new taxa viz. Roongodus phijani gen. et sp. nov. (Hybodontoidea) and Arduodens flammeus gen. et sp. nov. (Ctenacanthiformes) have been erected. Two morphoecological subtypes of Ph. gothicus dentition, characteristic of deeper and shallower shelves, are proposed.
first rewind previous Strona / 2 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.