Ograniczanie wyników
Czasopisma help
Autorzy help
Lata help
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 243

Liczba wyników na stronie
first rewind previous Strona / 13 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  computer modelling
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 13 next fast forward last
PL
Opracowano model przepływu ciepła dla instalacji pilotowej pieca szybowego TSL. Pozwolił on wyznaczyć na różnych poziomach pieca rozkład temperatur na jego ścianach i jego spodzie, uwzględniając rodzaj materiałów i grubość warstw wymurówki. Temperatura poszczególnych warstw wykładzin w funkcji odległości od zewnętrznej ściany pieca badana na różnych poziomach miała charakter wzrostowy. Najwyższe temperatury warstw wykładzin występowały na poziomie ciekłej kąpieli. Najniższe temperatury odnotowano na poziomie sklepienia pieca. Wysokie temperatury występowały również w warstwach wykładzin znajdujących się na spodzie pieca.
EN
A heat flow model was developed for the pilot installation of a TSL shaft furnace. It allowed to det. the temp. distribution on the furnace walls and its bottom at different levels of the furnace, taking into account the type of materials and the thickness of the lining layers. The temp. of individual lining layers as a function of the distance from the external wall of the furnace, examined at various levels, was increasing. The highest temp. of the lining layers occurred at the level of the liquid bath. The lowest temp. were recorded at the level of the furnace vault. High temp. also occurred in the lining layers at the bottom of the furnace.
EN
The work focuses on vertical cavity surface emitting lasers (VCSELs) made of nitride materials that emit a wavelength of 445 nm. Two structures were examined: a laser with a tunnel junction and implantation (TJ VCSEL) and an ITO contact (ITO VCSEL). The analysis delves into capacitance phenomena influencing the modulation speed of these lasers. The results highlight differences in active currents between two structures, i.e., currents which contribute to the modulation of the laser emission. According to the authors’ simulations, the TJ VCSEL is more effective in modulating the number of carriers in the active region than the ITO VCSEL, assuming the same modulation amplitude of driving current.
EN
The article concerns the acoustic insulation of a double wall made of silicate blocks. A comparison is presented between the results of theoretical modelling and acoustic measurements of the completed partition. The paper focuses in particular on the differences observed in the low frequency range. Consideration is given to the influence of the natural modal distribution on the resultant sound insulation. The discussion on the basis of the collected results of comparing computer modelling and acoustic measurements of the physically realised wall was used to formulate the final conclusions.
PL
Artykuł dotyczy izolacyjności akustycznej ściany podwójnej wykonanej z bloczków silikatowych. Przedstawiono porównanie wyników modelowania teoretycznego z rezultatami pomiarów akustycznych wykonanej przegrody. Skupiono się przede wszystkim na zauważonych różnicach w zakresie małych częstotliwości. Przedstawiono rozważania dotyczące wpływu rozkładu modów własnych na wypadkową izolacyjność akustyczną. Analiza zebranych wyników porównania modelowania komputerowego oraz pomiarów akustycznych fizycznie zrealizowanej przegrody posłużyła do sformułowania wniosków końcowych.
EN
There is being presented simulation of increasing membrane permeability cellular baker’s yeast for the set values concentrations of alcohol solutions. It allows for easy activity forecasting intracellular catalase. Due to the costs associated with disposal large volumes of waste and the purchase of permeabilizing agents the tolerance of the permeabilization process to changes in alcohols concentration was checked. For this purpose, appropriate mathematical models were used. The obtained results confirm the high sensitivity of the process to changes in concentration permeabilizing factor. Of the three permeabilizations studied, this is the process using ethanol turned out to be the least tolerant to change concentration of the permeabilizing factor. The concentration of the solution of this alcohol, which will be used in permeabilization to obtain cells yeast with catalase activity half of the optimal activity, is only 20% lower than the optimal concentration. Processes permeabilization using the other two alcohols considered less sensitive to changes in their concentration. The concentrations of 1-propanol and 2-propanol solutions for AS=½ Aopt are 2.5 times and 3.5 times lower than the optimal concentrations, respectively.
EN
This study focuses on utilizing computer modeling and simulation techniques, specifically the ANSYS software, to analyze the dynamics of bridge structures. The primary objective was to study the vibrations of a riverbed metal bridge structure and determine their characteristics. The research involved theoretical dynamic calculations considering the design features of the bridge components and the materials used in their construction. The obtained results enabled the determination of resonance frequencies for the vibration modes. By utilizing the ANSYS software, a three-dimensional virtual model of the bridge structure was created, allowing for a detailed analysis of its dynamic behavior. The first three vibration modes of the riverbed metal bridge structure were calculated, and numerical results were obtained for six modes. The findings of this research have practical significance as they provide informed decision-making support during the construction, maintenance, and modernization of bridge structures. The study of bridge dynamics using advanced technologies contributes to enhancing the safety, reliability, and longevity of these vital infrastructure assets.
PL
Niniejsze badanie koncentruje się na wykorzystaniu technik modelowania komputerowego i symulacji, w szczególności oprogramowania ANSYS, do analizy dynamiki konstrukcji mostowych. Głównym celem było zbadanie drgań metalowej konstrukcji mostu w korycie rzeki i określenie ich charakterystyki. Badania obejmowały teoretyczne obliczenia dynamiczne uwzględniające cechy konstrukcyjne elementów mostu oraz materiały użyte do ich budowy. Uzyskane wyniki umożliwiły wyznaczenie częstotliwości rezonansowych dla postaci drgań. Wykorzystując oprogramowanie ANSYS stworzono trójwymiarowy wirtualny model konstrukcji mostu, pozwalający na szczegółową analizę jego dynamicznego zachowania. Obliczono trzy pierwsze postacie drgań metalowej konstrukcji mostu koryta rzeki i uzyskano wyniki numeryczne dla sześciu postaci. Wyniki tych badań mają znaczenie praktyczne, ponieważ zapewniają świadome wsparcie w podejmowaniu decyzji podczas budowy, utrzymania i modernizacji obiektów mostowych. Badanie dynamiki mostów przy użyciu zaawansowanych technologii przyczynia się do poprawy bezpieczeństwa, niezawodności i trwałości tych kluczowych elementów infrastruktury.
PL
W pracy opisano techniki modelowania trójwymiarowego stosowane w przemyśle, w tym zasady modelowania metodą MES, która obecnie jest powszechnie stosowana podczas procesów projektowych w różnorodnych gałęziach przemysłu. Omówiono najbardziej popularne metody druku przestrzennego stosowane do wytwarzania zaprojektowanych elementów. Wskazano, że druk przestrzenny nie jest jeszcze rozpowszechniony w branży energetycznej tak jak w innych gałęziach przemysłu, co warunkuje możliwość jego zastosowania do produkcji izolacyjnych elementów konstrukcyjnych linii energetycznych. W pracy zaprezentowano w pełni funkcjonalny element osprzętu linii energetycznej wykonany przy użyciu technologii FDM wraz z wynikami badań.
EN
Publication presents the variety of 3D modeling techniques in industry, and describes the principle of FEM modeling, which is now commonly used in design processes in various industries. The 3D printing methods of designed elements were also shown, and the most popular ones were described. It was pointed out that the 3D printing in the power industry is not yet as popular as in other industries, which significantly increases the possibilities for the development of insulation parameters of power line construction elements. A fully functional element made using FDM technology was presented, which shows the usefulness of this technology as well as gives further opportunities for its development.
PL
Artykuł dotyczy problematyki wykrywania zwarć wysokooporowych w rozdzielczych sieciach średniego napięcia. Przedstawiono problemy detekcji zwarć wysokooporowych oraz omówiono niektóre zagadnienia dotyczące komputerowego modelowania tych zwarć pod kątem wykorzystania danych symulacyjnych do testowania algorytmów zabezpieczeniowych. Przedstawiono wyniki symulacyjne uzyskane za pomocą opracowanego w ATP-EMTP modelu sieci rozdzielczej średnich napięć.
EN
The paper is concerned with the issue of high impedance fault detection in distribution medium voltage networks. The high impedance fault detection difficulties are presented and some issues regarding computer modeling of these faults are discussed. Simulation results were obtained from MV network modelling in EMTP.
EN
In this paper, the authors aim to develop a methodology for customer segmentation based on their response to marketing campaigns, considering customer value using predictive analytics methods and computer modeling tools. The scientific novelty of this article is the method of modeling and analyzing customer reactions to a marketing campaign. This method includes the following stages: questionnaire development and customer data collection; preliminary analysis of the received data; preparation of customer data in a formalized presentation; RFM analysis of customer value; building a model of customer feedback on a marketing campaign based on the solution list algorithm; analysis of the obtained results. The decision list algorithm was chosen to model customer response to marketing campaigns, which provides an inherent order to the rule set and a more accessible interpretation of the results. The IBM SPSS Modeler was used as a modeling tool. Customer information for the model was obtained through a survey conducted among customers of companies manufacturing packaging goods using a specially designed questionnaire. The practical value of the research lies in the application of the results of customer segmentation to create marketing strategies by a company that can consider the results of both models and group them to cover a wider range of customers.
PL
W artykule autorzy stawiają sobie za cel opracowanie metodologii segmentacji klientów na podstawie ich reakcji na kampanie marketingowe, z uwzględnieniem wartości klienta z wykorzystaniem metod analityki predykcyjnej i narzędzi modelowania komputerowego. Nowością naukową artykułu jest metoda modelowania i analizy reakcji klientów na kampanię marketingową. Metoda ta obejmuje następujące etapy: opracowanie kwestionariusza i zebranie danych o klientach; wstępną analizę otrzymanych danych; przygotowanie danych klienta w sformalizowanej prezentacji; analizę RFM wartości klienta; zbudowanie modelu opinii klientów o kampanii marketingowej w oparciu o algorytm listy rozwiązań; analizę uzyskanych wyników. Algorytm listy decyzyjnej został wybrany do modelowania reakcji klientów na kampanie marketingowe, co zapewnia nieodłączne uporządkowanie zestawu reguł i bardziej przystępną interpretację wyników. Jako narzędzie modelowania wykorzystano program IBM SPSS Modeler. Informacje o kliencie dotyczące modelu uzyskano poprzez ankietę przeprowadzoną wśród klientów firm produkujących towary opakowaniowe za pomocą specjalnie zaprojektowanej ankiety. Praktyczna wartość badania polega na zastosowaniu wyników segmentacji klientów do tworzenia strategii marketingowych przez firmę, która może uwzględnić wyniki obu modeli i pogrupować je w celu objęcia szerszego grona klientów.
EN
In solving technological problems related to sheet metal deep drawing with the use of computer tools, the key issue is still the correct determination and entering of boundary conditions to FEM-based software. The procedure for preparing input data for modelling such processes includes geometric data (drawing of tools and material), technological parameters along with the contact conditions between the workpiece and the tools (friction model and type of lubricant) and material properties, in which work-hardening curves are of particular importance. In typical material databases of FEM-based software and designed for computer modelling of deep drawing processes, the properties of only a small number of material grades are available, and commercial software producers charge additional fees for each additional quantity. Those properties that are already in the database are usually devoid of basic information, e.g. related to the state of the material (material after recrystallization, annealing, cold working has different properties). In paper, experimental tests were carried out to determine flow curves based on cold tensile curves for flat samples made of EN-AW 1050A aluminium, Cu-ETP copper, CuZn37 brass and S235JRG2 steel. The investigation used a universal testing machine with a 20kN pressing force, equipped with specialized TestMotion software for measuring forces and displacements. It was calibrated and satisfies the metrological requirements for class 0.5. A comparative analysis of the curves determined by the analytical method was carried out. The material models obtained in the experimental tests were used in the computer simulation of the deep drawing processes of cylindrical drawpieces in the ABAQUS software. The results were experimentally verified in terms of comparing the changes in the pressing forces as a function of the displacement of the punch. The results obtained in the research can be used in industrial practice for computer-aided design of cold-deep drawing processes for drawpieces of various shapes from the discussed materials.
PL
W artykule przedstawiono wybrane rezultaty badań eksperymentalnych dotyczących wpływu wysokiej temperatury na stateczność giętno-skrętną stalowych blachownic ze smukłym środnikiem. Wyznaczone wartości temperatury krytycznej oraz przemieszczeń poziomych porównano z wynikami zaawansowanych symulacji komputerowych. Podano także oszacowane eksperymentalnie wartości współczynników redukcyjnych właściwości mechanicznych stali.
EN
The selected results of experimental research on the influence of high temperature on the flexural-torsional stability of steel plate girders with a slender web are presented in this paper. Estimated values of critical temperature and horizontal displacements have been compared with the results of advanced numerical simulations. Moreover, experimentally evaluated reduction factors for steel mechanical properties at elevated temperature are given.
PL
W artykule przedstawiono metodologię opracowania parametrycznego modelu geometrycznego zgodnego z technologią BrIM i powstałego na bazie modelu 3D+ modelu obliczeniowego drogowego mostu extradosed. Modele opracowano za pomocą dostępnego komercyjnego oprogramowania oraz autorskich rozwiązań programistycznych. Wykorzystano dostępną dokumentację przetargową budowanego mostu typu extradosed nad rzeką Dunajec w okolicy miejscowości Kurów.
EN
The article presents the methodology of developing a parametric geometric model, which is compliant with the BrIM technology, and a 3D+ based computational model of an extradosed bridge. The models were developed using the available, commercial software and proprietary programming solutions. It was done on the basis of the available tender documentation for the extradosed bridge constructed over the Dunajec River, near the town of Kurów.
PL
Przyczółki stanowią skrajne podpory konstrukcji mostowych, których celem jest przeniesienie obciążeń (reakcji) z przęseł na ośrodek gruntowy. Każdy z powyższych rodzajów przyczółków charakteryzuje się odmienną specyfiką pracy statycznej. W referacie przedstawiono zasady ich komputerowego modelowania za pomocą metody elementów skończonych (MES) na podstawie przykładów z praktyki inżynierskiej.
EN
The abutments are extreme supports of bridge structures, whose task is to transfer loads (reactions) from spans to the ground. The each of the above types of abutments is characterized by a different specificity of static work. The paper presented the principles of their computer modeling using the finite element method (MES) based on examples from engineering practice.
EN
Ongoing energy measurement is one of the parameters such as: electron beam current, transporter speed, or scanning width, that must be recorded according to the conditions imposed in the accelerator validation procedure. Described measurement method based on the use of a secondary electron collecting electrode has been tested at the electron beam linear accelerator installation typically used for radiation sterilization. Data processing and presentation of the electron beam characteristics is based on the information obtained via dedicated pulse acquisition interface. The energy spectra parameters provide data for modeling and calculation of dose distribution for irradiation process optimization and also knowledge of accelerator RF alignment in case of service.
PL
Płytowe przekroje poprzeczne przęseł są rozwiązaniem często stosowanym w drogowych obiektach inżynierskich. Ich analizę na podstawie teorii dźwigarów umożliwia w praktyce projektowej metoda elementów skończonych (MES). Przed upowszechnieniem się techniki komputerowej stosowano modele jednobelkowe z rozdziałem poprzecznym obciążenia. Przekroje płytowe często odwzorowuje się za pomocą rusztów belkowych. W artykule przedstawiono obliczenia porównawcze wiaduktów płytowych ze sparametryzowanymi, zróżnicowanymi rozpiętościami, szerokościami i kątami skosów przęseł. Wykazane rozbieżności szacowania wielkości statycznych za pomocą modeli numerycznych różnej dokładności, świadczą o wpływie klasy odwzorowania komputerowego na uzyskiwane wartości i potencjalne skutki uproszczeń stosowane w projektowaniu.
EN
Plate cross-sections of spans are often used in road engineering facilities. In design practice, the method of finite elements (MES) enables their analysis based on the theory of girder. Before the dissemination of computer technique, one-bar models with a transverse chapter were used. Plate cross-sections are often reproduced with beam grates. The article presents comparative calculations of plate viaducts with parameterized, varied spans, widths and slants of span. The discrepancies of estimating static quantities using numerical models of various accuracy testify to the impact of the computer mapping class on the values obtained and the potential effects of simplifications used in design.
EN
Slope Stability Analysis is one of the main aspects of Open-pit mine planning because the calculations regarding the stability of slopes are necessary to assess the stability of the open pit slopes together with the financial feasibility of the mining operations. This study was conducted to analyse the effect of groundwater on the shear strength properties of soft rock formations and determine the optimum overall slope angle for an open pit coal mine at Thar Coalfield, Pakistan. Computer modelling and analysis of the slope models were performed using Slide (v. 5.0) and Phase2 (v. 6.0) software. Integrated use of Limit Equilibrium based Probabilistic (LE-P) analysis and Finite Element Method (FEM) based shear strength reduction analysis was performed to determine the safe overall slope angle against circular failure. Several pit slope models were developed at different overall slope angles and pore-water pressure ratio (Ru) coefficients. Each model was initially analysed under dry conditions and then by incorporating the effect of pore-water pressure coefficients of Ru = 0.1, 0.2, and 0.3 (partially saturated); finally, the strata were considered to be fully saturated. It was concluded that at an overall slope angle of 29 degrees, the overall slope will remain stable under dry and saturated conditions for a critical safety factor of 1.3.
EN
One of the most interesting categories of artifacts for archaeometallurgical research includes deposits of bronze items, so-called “metallurgists hoards”. They contain, aside of final products, many fragments of raw material and, moreover, metallurgical tools. An important source for the studies on the history of metallurgical technology is hoard from Przybysław, Greater Poland district. Thus, the aim of the work is the identification and interpretation of bronze-working practices and strategies adopted by prehistoric communities of the Late Bronze Age and the Early Iron Age (ca. 600 BC). The examined objects are characterized in terms of their design, structure, and chemical composition. The methods chosen for the studies of artifacts include: metallographic macro- and microscopic observations using optical microscopy (OM) and scanning electron microscopy (SEM), the analysis of chemical composition with the methods of energy dispersive X-ray spectroscopy (EDS), and X-ray fluorescence (ED-XRF). The thermodynamic analysis of the alloys was performed on the basis of the CALPHAD method. The experimental melts allowed to verify the theoretical considerations and to determine the characteristic temperatures of changes. The old casting technology can be analyzed basing on computer modeling and computer simulation methods. Simulations in the MAGMASOFT® software are a good example to illustrate how to fill a mould cavity with a molten bronze for a hoop ornament. It is also an appropriate tool to determine temperature distribution in a mould. The simulations also show the possible disadvantages with this old technology.
EN
An investigation of the failure process of maraging steel grade X3NiCoTi18-9-5 produced by the SLM method that is subjected to various three-dimensional stress-states has been carried out. In this paper, deformations and damage evolution are analysed experimentally and numerically. Three microstructures of the SLM steel were obtained after the appropriate heat treatment. Tensile tests of smooth specimens and axisymmetric notched specimens have been performed. Numerical models of the samples with ring notches were made in order to determine the stress state and displacement field in the notch area at the moment of the sample’s breakage as well as to compare the experimentally determined effective strain in the notch after the sample’s breakage with the deformation being calculated on the basis of the numerical solution. As a result of the research, it was found that the type of fracture of samples obtained from X3NiCoTi18-9-5 steel powder by the SLM method depends on the size of the ring notch’s radius. Based on the performed numerical calculations and experimental tests, it was found that, for each of the analysed variants of heat treatment, it was possible to indicate the approximate limit value of triaxiality factor Tf, above which there is a scrap of brittle X3NiCoTi18-9-5 steel produced by the SLM method. This value is determined by the characteristic bending of the function that determines the relationship between triaxiality factor Tf and effective strain eeff.
EN
In recent years significant progress has been made in structural application of glass elements in building industry. However, the issues related to computer modelling of glass panes, as well as analytical procedures allowing for taking into account the bonding action of PVB foil are not widely known in the engineering environment. In this paper results of numerical study of laminated glass plates are presented. The scope of the research covers over 40 cases of panes. Narrow (characterized by edge length ab > 2) and square (a/b = 1) panes made of two or three layer laminated glass have been taken into account. The paper deals mainly with point supported glass. However, selected results for linearly supported plates have been included as well for comparison. For each considered case an advanced computational model have been developed within the environment of Abaqus software. Pointwise supports have been modelled using methods of various complexity. The obtained results have been compared with the results of standard calculations using Wölfel-Bennison and Galuppi-Royer-Carfagni hypotheses. The analytical procedures proposed by CEN have been applied as well. As a result, recommendations for static calculations of laminated glass panes have been formulated. The computational procedure based on the hypothesis presented by L. Galuppi and G. Royer-Carfagni should be considered the most universal. The remaining methods may be applied only in limited scope. In order to estimate maximum principal stress in the support zone an advanced computer model has to be used. The support may be modelled in an exact or simplified manner.
PL
W ostatnich latach dokonano znaczącego postępu w zakresie konstrukcyjnego wykorzystania w budownictwie elementów ze szkła. Równocześnie trwają prace nad drugą edycją norm europejskich, wśród których przewidziano przygotowanie odrębnej normy dotyczącej projektowania konstrukcji szklanych. Zgodnie z dokumentami opracowanymi przez odpowiedni komitet techniczny Europejskiego Komitetu Normalizacyjnego, wspomniana norma powinna obejmować swoim zakresem także nowoczesne procedury w zakresie obliczeń statycznych prętów i płyt ze szkła laminowanego. Tego typu elementy konstrukcyjne podparte w sposób punktowy lub w sposób liniowy są powszechnie stosowane w praktyce inżynierskiej ze względów architektonicznych i funkcjonalnych. Problematyka związana z modelowaniem komputerowym elementów ze szkła, jak również procedury analityczne pozwalające na uwzględnienie zespalającego działania folii PVB, nie są jednak powszechnie znane i stosowane w środowisku inżynierskim. W tej sytuacji w artykule przedstawiono wyniki weryfikacji wybranych procedur obliczeniowych dotyczących płyt ze szkła laminowanego. W przeprowadzonych analizach uwzględniono metody obliczeniowe oparte na hipotezach opracowanych przez E. Wolfela i S.J. Bennisona, a także przez zespół autorski L. Galuppi i G. Royer-Carfagni. Rozpatrywano również ścisłe rozwiązanie zagadnienia zginanego pręta ze szkła laminowanego wyprowadzone z modeli reologicznych przez K. Langosch. Otrzymane rezultaty porównano każdorazowo z wynikami zaawansowanych symulacji komputerowych. W celu możliwie dokładnego odwzorowania zachowania się danej płyty szklanej oraz zespalającej warstwy PVB stosowano bryłowe elementy skończone, natomiast obliczenia były prowadzone jako geometrycznie nieliniowe. Szczególną uwagę poświecono zagadnieniom związanym z analizą płyt podpartych w sposób punktowy. Naprężenia główne w strefie podporowej były wyznaczane dla modeli komputerowych o zróżnicowanym stopniu skomplikowania, w tym również dla przypadków w których uwzględniono dokładna geometrię danej rotuli. Omówiono propozycję uproszczonego sposobu modelowania strefy podporowej. Analizy były prowadzone dla dwóch grup płyt o zróżnicowanej geometrii. W zakresie rozwiązań poszczególnych płyt rozpatrywano elementy ze szkła dwu- oraz trójwarstwowego. W celach porównawczych w artykule przedstawiono również rezultaty uzyskane dla płyt podpartych w sposób przegubowo-liniowy. Na podstawie przeprowadzonych badan sformułowano wnioski w zakresie przydatności poszczególnych metod obliczeniowych.
PL
W artykule przedstawiona została metodyka optymalizacji geometrii łącznika piasty z wieńcem koła zębatego oparta na metodach numerycznych. Celem optymalizacji było uzyskanie niższej masy łącznika przy jednoczesnym zachowaniu cech funkcjonalnych. W artykule porównane zostały wyniki uzyskane za pomocą obliczeń analitycznych, metody elementów skończonych oraz metody opartej na warunkach i pętlach.
EN
The article presents the methodology of optimizing the geometry of the hub connector with the gear wheel rim based on numerical methods. Optimization aimed to obtain a lower weight of the connector while maintaining the functional features. The article compares the results obtained by analytical calculations, the finite element method and the metod based on conditions and loops.
PL
Na podstawie badań symulacyjnych opracowano metodę zwiększania skali procesu jednoślimakowego wytłaczania tworzyw polimerowych, z zastosowaniem technik ewolucyjnych (algorytmów genetycznych). Do symulacji procesu wytłaczania stosowano program GSEM (Global Screw Extrusion Model), a do zwiększenia skali specjalnie w tym celu opracowany program GASES (Genetic Algorithms Screw Extrusion Scaling). Jako kryteria stosowano jednostkowe zużycie energii, szybkość uplastyczniania i szybkość wzrostu temperatury tworzywa. Uzyskano znaczący wzrost wydajności procesu wytłaczania.
EN
A method of scaling-up the single screw extrusion of polymeric materials has been developed based on the process simulation studies using the evolutionary techniques (genetic algorithms). The simulation tests were carried out using the GSEM extrusion simulation program, while the scaling-up was carried out on the basis of the GASES evolutionary scaling-up program specially developed for this purpose. Scaling-up has been performed according to the criteria of unit energy consumption, polymer melting rate and polymer temperature, obtaining a significant increase in extrusion throughput.
first rewind previous Strona / 13 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.