Ograniczanie wyników
Czasopisma help
Autorzy help
Lata help
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 57

Liczba wyników na stronie
first rewind previous Strona / 3 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  transient state
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 3 next fast forward last
PL
W pracy omówiono znaczenie parametrów energii elektrycznej w stanach nieustalonych dla oceny zdolności sieci elektroenergetycznej statku powietrznego do samoregulacji. Wykazano, iż na jakość energii elektrycznej systemu elektroenergetycznego statku powietrznego wpływa czas jego eksploatacji. Zmiany starzeniowe wynikające z długotrwałej eksploatacji systemu elektroenergetycznego powodują pogorszenie parametrów energii elektrycznej, a to wpływa bezpośrednio na zdatność do lotów oraz bezpieczeństwo latania. Zachowanie normatywnych parametrów energii w stanach nieustalonych jest bardzo istotne dla zapewnienia prawidłowej eksploatacji statku powietrznego. W artykule opisano metodę pomiarów jakości energii elektrycznej w stanach nieustalonych, a na przykładzie systemu elektroenergetycznego prądu stałego samolotu Su-22 przedstawiono istotę diagnostyki jego sieci w stanach nieustalonych. Zaprezentowano również przykładowe wyniki badań, przeprowadzonych przez autorów, dotyczących zmian parametrów energii elektrycznej w stanach nieustalonych samolotu Su-22, uzyskane w czasie jego wieloletniej eksploatacji.
EN
The paper presents the importance of electricity parameters in transient states for assessing the ability of an aircraft's power grid to self-regulate. It has been shown that the quality of electrical energy of an aircraft's power system is influenced by its operating time. Aging changes resulting from long-term operation of the power system cause deterioration of electrical energy parameters, which directly affects airworthiness and flying safety. Maintaining standard energy parameters in transient states is very important to ensure proper operation of the aircraft. The article describes the method of measuring the quality of electricity in transient states, and using the example of the DC power system of the Su 22 aircraft, the essence of its network diagnostics in transient states is presented. Also presented are sample results of research conducted by the authors regarding changes in electrical energy parameters in transient states of the Su 22 aircraft, obtained during its many years of operation.
2
Content available remote Inrush current impact limitation in smart building applications
EN
This paper presents a hybrid switches based on semiconductors and mechanical switches. Devices are dedicated to limitation of adverse effect of capacitive type loads start-up especially in domestic applications, during which high value of inrush current is generated. Two different approaches are studied in the paper, both of them using energy harvesting to operate. The proposed solution combine together several advantages switches, such as: increased lifetime of the mechanical part, small on-state losses, smaller dimensions in comparison to mechanical switches, increased durability on overcurrent states, arc-less switching, or limited switching transients. In presented case solution is adopted as rocker switch of LED light sources.
PL
W artykule przedstawiono łączniki hybrydowe oparte na półprzewodnikach i łącznikach mechanicznych. Urządzenia przeznaczone są do ograniczania niekorzystnych skutków załączania obciążeń typu pojemnościowego, zwłaszcza w zastosowaniach domowych, podczas których generowana jest duża wartość krótkotrwałego prądu załączania. W artykule przeanalizowano dwa różne podejścia, z których oba wykorzystują do działania pozyskiwanie energii. Zaproponowane rozwiązanie łączy w sobie kilka zalet wyłączników, takich jak: zwiększona żywotność części mechanicznej, małe straty w stanie załączenia, mniejsze wymiary w porównaniu do wyłączników mechanicznych, zwiększona trwałość w stanach nadprądowych, czy ograniczenie łączeniowych stanów przejściowych. W prezentowanym przypadku przyjęto rozwiązanie jako łącznik kołyskowy źródeł światła LED.
EN
The measurement of instantaneous angular speed in flywheels has been used in Internal Combustion Engines for the diagnosis of faults in the fuel injection systems, combustion quality at idle, ignition system, and especially in the performance assessment of starter motor and battery accumulator, among others. It is the aim of this paper to forecast the use of an experimental flywheel-based test bench, driven by a single-cylinder Internal Combustion Engine and a starter motor, developed to perform research studies in the laboratory of internal combustion engines. It is illustrated the measurement and processing of the instantaneous angular speed of a flywheel to characterize the dynamic response of the inertial system during the run-up and run-out regimes. The mathematical model of the transfer function is presented, relating the angular velocity with the torque transmitted by the starter motor as a first-order system. For the acquisition of the signal, a NI 6009 card is used, while a Matlab computer program is employed to plot the instantaneous angular velocity curves, and also to identify the time response of the system. The time constant is 1.54 seconds, which corresponds to 63.2% of the value of steady state signal in run-up regime.
PL
W artykule przedstawiono wyniki badań dotyczących określenia zespołów wytwórczych mających największy wpływ na stabilność kątową rozległego systemu elektroenergetycznego (SEE). Zespoły te określono, wykorzystując wartości własne macierzy stanu SEE związane ze zjawiskami elektromechanicznymi (elektromechaniczne wartości własne). Wartości własne obliczono na podstawie analizy przebiegów zakłóceniowych mocy chwilowej zespołów wytwórczych pracujących w SEE.
EN
The paper presents the results of investigations on the determination of generating units most affecting the angular stability of an extensive power system (PS). These units were determined using the eigenvalues of the PS state matrix associated with electromechanical phenomena (electromechanical eigenvalues). The eigenvalues were calculated based on the analysis of the instantaneous power disturbance waveforms of the generating units working in the PS.
5
Content available remote Analysis of transient waveforms in a power system at asymmetrical short-circuits
EN
In the paper, there is presented the analysis of disturbance waveforms of a synchronous generator operating in a single-machine power system consisting of a generating unit connected by a high-voltage power line to a bus. There are considered disturbances in the form of symmetrical and asymmetrical short-circuits in different places of the transmission line. The current-voltage equations of the power line and the bus are written for phase components, which allows for easy modeling of various asymmetries.
PL
W artykule analizowano przebiegi zakłóceniowe generatora synchronicznego pracującego w jednomaszynowym systemie elektroenergetycznym składającym się z zespołu wytwórczego, połączonego linią energetyczną wysokiego napięcia z siecią sztywną. Uwzględniono zakłócenia w postaci zwarć symetrycznych i niesymetrycznych w różnych miejscach linii przesyłowej. Równania prądowo-napięciowe linii energetycznej i sieci sztywnej zapisano dla składowych fazowych, co pozwala na łatwe modelowanie różnych asymetrii.
PL
W artykule przedstawiono wyniki pracy polegającej na opracowaniu modelu dynamicznego węglanowych ogniw paliwowych oraz jego weryfikacji przy wykorzystaniu rzeczywistych danych pomiarowych. Na podstawie danych wejściowych w postaci parametrów gazów na wlocie do katody i anody opracowany model umożliwia badanie stanów nieustalonych pracy stosu ogniw paliwowych, w tym parametrów gazów na wylocie z katody i anody, a także krzywych prądowo napięciowych możliwych do uzyskania z ogniwa. Do obliczeń wykorzystane zostało oprogramowanie Aspen Hysys. Wyniki uzyskiwane przy pomocy modelu zostały porównane z rzeczywistymi danymi pomiarowymi uzyskanymi z badania referencyjnego stosu ogniw paliwowych o mocy 1 kW. Przeanalizowano dwa stany pracy ogniwa: stan ustalony i stan nieustalony (proces rozruchu). Zaprezentowano wykresy wyników pomiarowych i obliczeniowych.
EN
The paper presents results of work involving development of a dynamic model of molten carbonate fuel cells, both with its verification using experimental data. On the basis of input parameters (supplied gases on the inlet to cathode and anode channel and current drawn from fuel cells) the model calculates the real-time stack response, i.e. stack voltage, parameters of outlet gases allowing for transient states of MCFC stack analysis. Aspen Hysys software was used for the calculations. The results obtained using the model were verified with real measurement data obtained from a reference test of a 1 kW fuel cell stack. Two cell operating states were analyzed: steady state and transient (startup process). Graphs of measurement and calculation results are presented.
EN
The paper presents phenomena occurring during the switching of a small hydropower plant equipped with an induction generator, to the MV grid. Computer simulations were carried out and several work options were considered. The influence of the moment of synchronization with the grid and the influence of capacitor banks to compensate for reactive power of the generator were checked. Obtained results by computer simulation were presented and analyzed.
PL
W pracy przedstawiono zjawiska występujące podczas załączania malej elektrowni wodnej wyposażonej w generator indukcyjny, do sieci SN. Przeprowadzono symulacje komputerowe oraz rozpatrzono kilka wariantów pracy. Sprawdzono wpływ momentu synchronizacji z siecią oraz wpływ baterii kondensatorów do kompensacji mocy biernej generatora. Przedstawiono oraz przeanalizowano otrzymane wyniki, uzyskane drogą symulacji komputerowej.
8
Content available Wybrane stany przejściowe silników indukcyjnych
PL
W artykule przedstawiono możliwości modelowania stanów przejściowych siników klatkowych zasilanych napięciem sinusoidalnym z wykorzystaniem oryginalnego oprogramowania (asynch.c). Program umożliwia prezentację przebiegów dynamicznych na tle charakterystyk mechanicznych obliczanych na podstawie pełnego schematu zastępczego oraz równania Klossa. Możliwe jest także modelowanie wielu różnych sposobów zasilania maszyny indukcyjnej oraz różnych sposobów hamowania (jednofazowego, dynamicznego), nawrotu silnika oraz uwzględnienie dowolnej niesymetrii napięcia zasilającego. Do budowy programu symulacyjnego użyto autorskich rozwiązań programowych, ułatwiających tworzenie programów symulacyjnych na podstawie zapisu problemu w postaci nieliniowych równań stanu. Oryginalne rozwiązania programowe umożliwiają zmianę parametrów oraz wartości zmiennych stanu w czasie symulacji.
EN
Sinusoidal voltage-fed squirrel-cage motor transient states modeling possibilities using original author’s software (asynch.c) are presented in the paper. The program provides dynamic waveforms presentation, on the background of mechanical characteristics, calculated based on equivalent circuit and the Kloss’s equation. Modeling of many different induction motor’s supplying methods, braking methods (1-phase, dynamic), motor’s reversion and any kind of supplying voltage asymmetry is also possible. For simulation program realization, original author’s programming solutions providing simulation algorithms building have been used, basing on non-linear state equations description. Original programming solutions provide parameter and state variables values changing during the simulation time.
9
Content available Wybrane stany przejściowe silników indukcyjnych
PL
W artykule przedstawiono możliwości modelowania stanów przejściowych siników klatkowych zasilanych napięciem sinusoidalnym z wykorzystaniem oryginalnego oprogramowania (asynch.c). Program umożliwia prezentację przebiegów dynamicznych na tle charakterystyk mechanicznych obliczanych na podstawie pełnego schematu zastępczego oraz równania Klossa. Możliwe jest także modelowanie wielu różnych sposobów zasilania maszyny indukcyjnej oraz różnych sposobów hamowania (jednofazowego, dynamicznego), nawrotu silnika oraz uwzględnienie dowolnej niesymetrii napięcia zasilającego. Do budowy programu symulacyjnego użyto autorskich rozwiązań programowych ułatwiających tworzenie programów symulacyjnych na podstawie zapisu problemu w postaci nieliniowych równań stanu. Oryginalne rozwiązania programowe umożliwiają zmianę parametrów oraz wartości zmiennych stanu w czasie symulacji.
EN
Sinusoidal voltage-fed squirrel-cage motor transient states modeling possibilities using original author’s software (asynch.c) are presented in the paper. The program provides dynamic waveforms presentation, on the background of mechanical characteristics, calculated based on equivalent circuit and the Kloss’s equation. Modeling of many different induction motor’s supplying methods, braking methods (1-phase, dynamic), motor’s reversion and any kind of supplying voltage asymmetry is also possible. For simulation program realization, original author’s programming solutions providing simulation algorithms building have been used, basing on non-linear state equations description. Original programming solutions provide parameter and state variables values changing during the simulation time.
EN
This publication describes the aim and essence of testing transient states of direct current electric power systems in relation to normative characteristics of a transient state. The above diagnostic tests of the given direct current nodes of the aircraft enable to quickly and efficiently determine the capability of its electric power systems to the selfregulation of direct current voltage. Many years of research of aircraft conducted in the Air Force Institute of Technology (ITWL) confirm that the ageing of power network elements impacts the deterioration of the parameters of voltage of transient state. On the basis of the results of on-ground tests of the Su-22 aircraft engine, the obtained model parameters of transient states were presented in subsequent years of its operation, which confirms the abovementioned statement. There were also presented the selected results of tests performed during the follow-up overhaul of Su-22 aircraft with exceeded permissible normative thresholds of the change of voltage amplitude values by the step increase of load (decaying impulses). The determined reasons for detected malfunctions were the incorrect operation of the aircraft electrical system, the inefficiency of voltage regulators RN-180M and the defectiveness of direct current generators GS-12T 3s. In the case of GS-12T 3s, the malfunction was due to the incorrect adjustment of the brushes’ angle in relation to the magnetically neutral zone of the commutating generator of a direct current, the above-mentioned generators were adjusted. Verification on the measurement stand and in real conditions (during engine test of Su-22) of transient state parameters of a direct current generators GS-12T 3s after the regulation, confirmed the airworthiness of the examined generators. It proves the efficiency and usefulness of the applied method in the operation process of aircraft. The described issues are essential in view of guaranteeing the airworthiness in aircraft operation and ensuring flight safety.
PL
W publikacji przedstawiono cel oraz istotę badania stanów przejściowych systemów elektroenergetycznych prądu stałego w odniesieniu do normatywnych charakterystyk stanu nieustalonego. Powyższe badania diagnostyczne poszczególnych węzłów prądu stałego statku powietrznego pozwalają na szybkie i skuteczne określenie zdolności ich układów zasilania elektrycznego do samoregulacji napięcia prądu stałego. Wieloletnie badania statków powietrznych wykonywane w Instytucie Technicznym Wojsk Lotniczych (ITWL) potwierdzają, że starzenie elementów sieci elektroenergetycznej wpływa na pogorszenie parametrów napięcia stanu nieustalonego. Na przykładzie wyników z prób naziemnych silnika wybranego samolotu Su-22 przedstawiono uzyskane przykładowe parametry stanów przejściowych w kolejnych latach jego eksploatacji, które potwierdzają powyższe stwierdzenie. Przedstawiono również wybrane wyniki badań realizowanych w czasie remontu weryfikacyjnego samolotów Su-22z przekroczonymi dopuszczalnymi progami normatywnymi zmian wartości amplitudy napięcia przy skokowym zwiększeniu obciążenia(impulsów zanikowych). Stwierdzonymi przyczynami wykrytych niesprawności były: niesprawna instalacja elektryczna samolotu, źle działające regulatory napięcia RN-180M oraz wadliwe działanie prądnic prądu stałego GS-12T 3s. W przypadku prądnic GS-12T 3s niesprawność wynikała z nieprawidłowego ustawienia w prądnicy kąta położenia szczotek względem strefy magnetycznie obojętnej. W oparciu o opracowaną w ITWL nową metodę pomiaru i korygowania kąta położenia szczotek względem strefy magnetycznie obojętnej komutatorowej prądnicy prądu stałego wykonano regulację powyższych prądnic. Weryfikacja na stanowisku pomiarowym i w warunkach rzeczywistych (w czasie próby silnika na samolocie Su-22) parametrów stanów przejściowych prądnic prądu stałego GS-12T 3s po regulacji potwierdziła zdatność do lotu badanych prądnic. Świadczy to o skuteczności i przydatności zastosowanej metody w procesie eksploatacji statków powietrznych. Przedstawiona problematyka jest istotna z punktu widzenia zapewnienia zdatności do lotu w procesie eksploatacji statków powietrznych i zapewnienia bezpieczeństwa lotów.
11
EN
Leak detection in transmission pipelines is important for safe operation of pipelines. The probability of leaks may be occurred at any time and location, therefore pipeline leak detection systems play a key role in minimization of the occurrence of leaks probability and their impacts. During the operation of the network there are various accidents or intentional actions that lead to leaks of gas pipelines. For each network failure, a quick reaction is needed before it causes more damage. Methods that are used to de-tect such network failures are three-staged-: early identification of leakage, an accurate indication of its location and determine the amount of lost fluid. Methods for leak detection can be divided into two main groups: external methods (hardware) and internal methods (software). External leak detection methods require additional, often expensive equipment mounted on the network, or use systems that could display only local damage on the pipeline. The alternative are the internal methods which use available network measurements and signalling gas leakage signal based on the mathematical models of the gas flow. In this paper, a new method of leak detection based on a mathematical model of gas flow in a transient state has been proposed.
PL
Wykrywanie nieszczelności w rurociągach przesyłowych jest bardzo ważne dla bezpiecznej eksplo-atacji rurociągów. Nieszczelność gazociągu może wystąpić w dowolnym momencie i miejscu, dlatego systemy wykrywania nieszczelności odgrywają kluczową rolę w ograniczeniu strat gazu. Podczas eks-ploatacji sieci występują różne czynniki prowadzące do uszkodzenia gazociągów. W przypadku każdej awarii sieci wymagana jest szybka reakcja, zanim spowoduje ona więcej strat. Metody stosowane do wykrywania awarii sieci to: identyfikacja wycieku, lokalizacja wycieku i określenie ilości straconego gazu. Metody wykrywania nieszczelności można podzielić na dwie grupy: metody zewnętrzne (sprzęt) i metody wewnętrzne (oprogramowanie). Zewnętrzne metody wykrywania wycieków wymagają, często kosztownego sprzętu, który może wykrywać i lokalizować tylko lokalne uszkodzenia w rurociągu. Alternatywą są metody wewnętrzne, które wykorzystując dostępne pomiary wybranych parametrów sieci oraz modele matematyczne przepływu gazu wykrywają i lokalizują nieszczelności. W niniejszym artykule zaproponowano nową metodę wykrywania nieszczelności opartą na matematycznym modelu przepływu gazu w stanie nieustalonym.
EN
The article describes the method for the multi-objective optimization of a proposed medical robot model, which has been considered in the form of a serial kinematic chain. In the assumed approach, the finite element method was used in order to model the flexibility of manipulator links. To speed up the optimization process, the response surface method was applied, defining the so-called metamodel. In order to uncover the optimal solution, a multi-objective genetic algorithm was used, guaranteeing the optimality of the manipulator model in the Pareto sense. The optimization process was carried out by analysing the selected case of the manipulator’s dynamics. The proposed optimization method allows us to minimize the mass of the manipulator while additionally ensuring the highest possible stiffness of its structure and sufficient strength of its parts. Furthermore, it offers the possibility to eliminate the natural frequency of vibrations of the model close to the resonant frequency.
PL
W artykule przedstawiono propozycję zastosowania stanów przejściowych w sygnałach prądowych do opisu odbiorników energii elektrycznej. Nowa metoda opisu posłuży do zaprojektowania nowego algorytmu identyfikacji odbiorników energii w systemach NIALM. Opisano stanowisko pomiarowe wykorzystane do badania stanów przejściowych pochodzących od urządzeń elektrycznych. Przedstawiono eksperymenty mające na celu zaobserwowanie i poprawną akwizycję sygnału prądu w momencie włączenia urządzenia oraz uzyskane rezultaty.
EN
The article presents the proposition of applying transient states in current signals for electrical appliances characterization. The main purpose of the new characterization method is to develop the new algorithm of electrical appliances identification in NIALM system. The paper presents the measurement setup used to explore transient states generated by electrical appliances. Experiments performed to observe and correctly acquire current signal when the device is turned on are described. Some experimental results are presented.
EN
The hereby paper discusses the influence of cable length on the SHM systems with the use of vibrating wire dynamic measurements. Vibrating wire sensors are mainly used for measuring stable or slowly changing strains, e.g. system installed on Rędziński Bridge in Wroclaw. From some time applications of these sensors for measuring dynamic deformations are becoming popular. Such tests were conducted on STS Fryderyk Chopin. New solutions generate new problems. In this case: the operational stability of systems exciting wire vibrations. The structure of such sensors and the electric cables length has an essential influence on their operations, what is undertaken in the paper. The subject of investigations constitutes the measuring system based on self-exciting impulse exciter, for which impedance parameters of electric cables and of the vibrating wire sensor were the most essential. The mathematical model of the system, experimental verification of the model as well as the results of theoretical analyses at the application of electric cables of various lengths are presented in the paper.
PL
Artykuł porusza temat wpływu długości kabli na możliwość budowy systemów monitorowania konstrukcji z wykorzystaniem dynamicznych pomiarów strunowych. Rozważania przeprowadzono na przykładzie polskiego urządzenia pomiarowego przeznaczonego do dynamicznych pomiarów strunowych. Czujniki strunowe są szeroko stosowanym narzędziem w pomiarach i monitorowaniu konstrukcji. Znalazły zastosowanie w kontroli stanu technicznego mostów, tam, tuneli, stadionów. Swoją popularność zawdzięczają prostej budowie, pełnej odporności na warunki środowiskowe oraz bardzo długiej stabilności czasowej wynoszącej, wg badań Norweskiego Instytutu Geotechnicznego, ponad 30 lat. Ponieważ informacja o mierzonej wielkości jest przenoszona przez zmiany napięcia (częstotliwość) to czujniki strunowe mogą pracować z kablami o długościach dochodzących do 12 km, co pozwala na umieszczanie czujników w dowolnych miejscach konstrukcji, często niedostępnych i podłączanie ich do urządzeń elektronicznych znajdujących się w łatwo dostępnym do serwisowania miejscu.
PL
W artykule przedstawiono strukturę modelu łańcuchowego, oraz metodę obliczeń stanu nieustalonego inicjowanego zwarciem zlokalizowanym w wybranym miejscu linii długiej jednofazowej lub trójfazowej. Warunki początkowe wyznaczane są z istniejącego stanu ustalonego w strukturze łańcucha przed zwarciem.
EN
The article presents the structure of the model chain, and the method of calculation of the transient short-circuit initiated located at the desired location long line single-phase or three-phase. Initial conditions are determined from the existing steady state within the chain structure against short circuits.
PL
W artykule rozwiązano zadanie minimalizacji zmian sygnału napięcia wewnątrz stratnego źródła energii elektrycznej w stanie nieustalonym (zmodulowanym) przy użyciu rachunku operatorowego. Określono sposób deformacji operatorów rozwiązujących poprzez tzw. poprawkę modulacyjną oraz wyznaczono ich rozkłady czasowe. Przedstawiono przykład obliczeniowy z siłą elektromotoryczną e(t,t’), okresową względem zmiennej t, zmodulowaną według czasu t’, zawierającą operator impedancji wewnętrznej typu RL.
EN
In the paper was solved the task of minimizing changes the voltage signal inside the lossy electrical power source in a transient state (modulated) by using the operational calculus. A deformation of the solving operators by the so-called modulation amendment was described and their time distributions was determined. The calculation example with the electromotive force e(t,t’), periodical respect to the variable t and modulated by time t', which contains an internal impedance operator type RL was presented.
PL
Obecność w sieci elektroenergetycznej baterii kondensatorów statycznych może pogłębiać występujące stany przejściowe i w efekcie prowadzić do wyłączania tych jednostek, np. podczas prowadzonych operacji łączeniowych. W artykule przedstawiono wyniki analizy retrospektywnej niepoprawnych wyłączeń baterii kondensatorów statycznych przyłączonych do elementów sieci przesyłowej Krajowego Systemu Elektroenergetycznego. Wskazano potencjalne środki zaradcze, które powinny zminimalizować ryzyko niepotrzebnych wyłączeń tych jednostek.
EN
Functioning of large static capacitor banks in the power network may intensify the transient states. This may lead to switch off of these devices. This paper presents the results of retrospective analysis of incorrect switch off of static capacitor banks which are in use in the transmission network of the Polish Power System. The paper also presents potential remedial actions that could minimize the risk of static capacitor banks incorrect switch off.
EN
There are quite few publications where the representation of transient states of tyres is taken into account in the examination of the motion of a vehicle as a whole by computer simulation. Most of the researchers who build models of motor vehicle dynamics leave this issue out of account, believing that it is related to the phenomena of little importance in both qualitative and quantitative terms, especially when self-excited vibration of wheels with pneumatic tyres is ignored. The objective of this publication is to present simulations of motor vehicle motion in the situation encountered during the training of drivers at Driver Improvement Centres. The author proves that the taking into account of the representation of transient states of the lateral force and aligning moment on vehicle tyres will strongly affect the calculation results. This is because of the excitation form, the time constants of which are comparable with the relaxation time of the tyres of the vehicle under test. The analysis results have been presented in both quantitative and qualitative form, i.e. in a table and as time histories of selected quantities, respectively. The data shown indicate considerable differences in the calculated effects of disturbance to rectilinear motion of a passenger car, when determined with ignoring the transient states of tyres, in comparison with the corresponding calculation results obtained with the transient states of tyres having been taken into account. The biggest differences in the absolute values recorded during the first second from the beginning of the disturbance to the motion of rear vehicle wheels were observed in yaw (heading) angle, lateral displacement of the centre of vehicle mass, and moment of forces on the steering wheel. The differences were so big (from 19 % to 26 %) that they changed the qualitative and quantitative assessment of vehicle behaviour. Thus, they highlighted the great impact that the representation of transient states of the lateral forces and aligning moments on vehicle tyres exerts on the results of the test being simulated.
PL
Niewiele jest prac, w których uwzględnia się opis stanów nieustalonych ogumienia w badaniach symulacyjnych ruchu całego pojazdu. Większość osób budujących modele dynamiki samochodów pomija ten opis, uznając, że dotyczy zjawisk mało istotnych z jakościowego i ilościowego punktu widzenia, zwłaszcza wtedy, gdy pomijane są drgania samowzbudne kół ogumionych. Celem niniejszej publikacji jest przedstawienie symulacji ruchu samochodu w sytuacji, która jest spotykana w trakcie treningów kierowców w Ośrodku Doskonalenia Techniki Jazdy. Autor udowadnia, że uwzględnienie opisu stanów nieustalonych siły bocznej i momentu stabilizującego ogumienia w bardzo istotny sposób wpływa na wyniki przeprowadzonych obliczeń. Wynika to z postaci wymuszenia, którego stałe czasowe są porównywalne z czasem nabiegania ogumienia badanego pojazdu. Autor przedstawia wyniki ilościowo w formie tabeli oraz jakościowo w postaci przebiegów czasowych wybranych wielkości. Wskazują one na istotne różnice między efektami zaburzenia ruchu prostoliniowego samochodu osobowego, dla przypadku nieuwzględniania stanów nieustalonych ogumienia, odniesionymi do wyników otrzymanych dla przypadku uwzględniania stanów nieustalonych ogumienia. Największe różnice modułów w trakcie pierwszej sekundy od wystąpienia zaburzenia ruchu kół osi tylnej, dotyczą kąta odchylenia (kąta kierunkowego), przemieszczenia poprzecznego środka masy pojazdu oraz momentu na kole kierownicy. Są one na tyle istotne (od 19 do 26%), że zmieniają jakościowo i ilościowo ocenę zachowania pojazdu. Wskazują, zatem, na duży wpływ opisu stanów nieustalonych sił bocznych i momentów stabilizujących kół jezdnych na wyniki symulowanego testu.
19
Content available remote Fractional models of selected combustion engine ignition systems
EN
This paper attempts to introduce a quasi-inductive element into ignition system and describes it by fractional order equation. Two typical systems have been studied and numerical analysis has been conducted.
PL
W pracy podjęto próbę wprowadzenia elementów quasi-indukcyjnych, aby opisać równaniem ułamkowego rzędu układy zapłonowe. Dwa typowe systemy zostały zbadane, po czym przeprowadzono dla nich analizę numeryczną.
PL
W artykule przedstawiono wyniki badań nad zastosowaniem strumienia unipolarnego w diagnostyce uzwojeń stojana oraz klatki wirnika silnika indukcyjnego. Analizowano przebiegi sygnałów napięciowych proporcjonalne do strumienia poosiowego zarejestrowane podczas rozruchu. Dokonano szczegółowej oceny skuteczności rozróżniania uszkodzeń dla wybranego sygnału diagnostycznego oraz możliwości zastosowania proponowanych algorytmów na stanowisku laboratoryjnym lub stacji prób. Obiektem analiz diagnostycznych był zmodyfikowany konstrukcyjnie silnik Sg112M-4 z zabudowaną cewką pomiarową i wymiennymi wirnikami o różnym stopniu niesymetrii klatki. Silnik ten miał również wyprowadzone odczepy, z wybranych zwojów dwóch cewek faz stojana, umożliwiające wykonanie symulowanych zwarć międzyzwojowych. Badany silnik klatkowy został obciążony prądnicą obcowzbudną, umożliwiającą zmianę momentu mechanicznego w całym zakresie charakterystyki. Artykuł podzielono na dwie części. Pierwsza część dotyczy wykrywania niesymetrii wirnika. W części drugiej przedstawiono wyniki pomiarów i analiz dla niesymetrii stojana spowodowanej zwarciami zwojowymi oraz uszkodzeń stojana i wirnika występujących łącznie.
EN
The article presents the research results of the unipolar flux application in the diagnostic of the stator winding and rotor cage of the induction motor. The waveforms of the voltage signals proportional to the axial flux, registered during the starting process, were analyzed. The detailed assessment of the effectiveness of failure distinction for chosen diagnostic signal is made. The application possibility of this algorithm on the testing station and laboratory test bench is shown. The research object is the Sg112M-4 motor of modified construction with built-in measurement coil and changeable rotors of different degree of the cage asymmetry. This motor contains also the terminal with chosen coil turns of the stator phase used to realize the turn-to-turn short circuit. The investigated squirrel cage motor was loaded by the separately excited DC generator allowing to modify the mechanical torque in the whole range of the motor torque characteristic. The paper consists of two parts. The first concerns the detection process of the rotor asymmetry. The second part presents the measurement results and its analysis for the case of stator asymmetry caused by the turn short circuit and the stator and rotor failure at the same time.
first rewind previous Strona / 3 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.