Wyniki wyszukiwania - BazTech

1

Narażenie górników na spaliny emitowane z silników Diesla mierzone jako węgiel elementarny

Szewczyńska Małgorzata, Dobrzyńska Elżbieta, Kowalska Joanna, Wasilewski Paweł

Przemysł Chemiczny

|

2025

|

T. 104, nr 1

86--90

PL

Przedstawiono wyniki oznaczania węgla elementarnego jako markera spalin z silników Diesla emitowanych do powietrza na stanowiskach pracy górników i maszynistów kolejek podwieszanych pracujących w wyrobiskach górniczych. Próbki powietrza pobierano z zastosowaniem próbników z impaktorem odcinającym cząstki respirabilne ≥ 1,0 μm. Do oznaczania stężeń węgla elementarnego w pobieranych próbkach zastosowano analizator termooptyczny z detektorem płomieniowo-jonizacyjnym.

EN

The content of elemental C as a marker of diesel engine exhaust emitted into the air at the workplaces of miners and overhead railway drivers working in 5 mine workings was detd. Air samples were collected using samplers screening respirable particles ≥ 1.0 μm. A thermooptical analyzer with a flame ionization detector was used to det. the concn. of elemental C in the collected samples.

2

35 lat reformowania górnictwa węgla kamiennego w Polsce

Bednorz Jarosław

Zeszyty Naukowe Instytutu Gospodarki Surowcami Mineralnymi i Energią PAN

|

2024

|

nr 112

127--141

PL

Transformacja ustrojowa w Polsce odbywa się na wielu płaszczyznach. Jednym z jej bez wątpienia istotnych elementów jest proces reformowania górnictwa węgla kamiennego trwający już 35 lat. Upadek poprzedniego systemu politycznego wymusił przeprowadzenie koniecznych zmian i postawił przed górnictwem wiele nowych wyzwań, zwłaszcza w kontekście przystąpienia w struktury UE. Zmieniające się przepisy prawa, wdrażane programy miały na celu przekształcenie i zmianę tej jednej z najbardziej trudnych do zreformowania branży i jej przekształcenie do zasad wolnego rynku. W ramach tego rozdziału przeprowadzona została krótka analiza przekształceń w sektorze górniczym. Zmiany organizacyjne, własnościowe oraz techniczne wpłynęły na efekty ekonomiczne oraz społeczne. Pojawiająca się kumulacja zagrożeń (kryzysy ekonomiczne, pandemia COVID, wojna w Ukrainie) stały się najlepszym wyznacznikiem tego, czy transformację sektora można uznać za udaną, czy jednak zakończyła się porażką.

EN

Political transformation in Poland takes place on multiple levels. One of its undoubtedly most important elements is the process of coal mining reforms, lasting 35 years to date. The fall of the previous political system has mandated making necessary changes and placed in front of coal mining many new challenges, especially in context of joining the EU. Changing laws and implementing programs served the goals of restructuring and altering of this most difficult to reform trade, and its change to meet the rules of free market. Within this chapter a brief analysis of alterations within the mining sector was performed. Organizational, ownership and technical changes had an impact on economic and social effects. The accumulation of threats (economic crisis, COVID–19 pandemic, war in Ukraine) has become the best benchmark for if the transformation of the sector was a success, or has it ended in failure

3

170 lat kopalni Bóbrka

Sęp Jan

Wiek Nafty : zeszyty naukowo-historyczne

|

2024

|

nr 2-3

5--10

4

Extraction of methane from the closed mine "Moszczenica”

Badura Henryk, Biały Witold

Mining Machines

|

2024

|

vol. 42, iss. 2

165--173

EN

Closed methane hard coal mines may become a source of methane used in the energy industry. There are many unliquidated tunnel workings left, they contain lotof workingswith a large capacity of free space, and a network of cracks formed in the rock mass. Release of methane to the atmosphere is practically reduced to zero. Closed mines can be a source of methane used to produce energy. This article presents the example of the "Moszczenica" mine as a source of methane, which is captured and converted into electricity and heat.

5

Spatio-temporal changes in the gravity and post-mining seismic activity in abandoned deep coal mine Kazimierz-Juliusz during flooding

Kotyrba Andrzej, Kortas Łukasz, Siwek Sławomir

Journal of Sustainable Mining

|

2024

|

Vol. 23, iss. 4

357--372

EN

The flooding of an underground hard coal mine, resulting in the filling of post-mining voids (workings and goafs) and the repeated saturation of pore and interstitial spaces of the adjacent rock with water, change the mass and its distribution in the near-surface part of the earth’s crust. This process is slow and lasts many years. As a result, the local gravity field undergoes dynamic changes. It depends on the surface morphology and the density of geological strata, which is related to their water content. Changes in the local gravity field can be monitored by periodic gravity surveys performed in the area of the flooded mine using portable spring gravimeters. This paper presents the results of gravity monitoring surveys conducted in the area of the abandoned coal mine Kazimierz-Juliusz (K-J) in Poland, which is in the process of flooding. Gravity surveys were conducted at yearly intervals spanning 2021-2023. We used a high-precision CG-6 gravity meter manufactured by Scintrex LTD, allowing for relative gravity measurement with an accuracy of order 0.005 mGal. In the collected data set, the rates of annual gravity change ranged from -0.04 mGal to 0.04 mGal. The K-J mine was closed in 2016, and since then, the rock mass in the zone between the deepest workings (about 750 m) and the surface has been undergoing repeated water saturation. In 2021-2023, the water table in carboniferous rock mass was located at an estimated depth of 380 m and moved up to a depth of 330 m. An average yearly increase of the water table level oscillated around 18 m per year. During this period, over 50 seismic tremors of local magnitude ranging from 0.6-2 and ground deformations on the surface were recorded in the K-J mine’s area. Surface deformations recorded in this area by GNSS surveys had a form of subsidence and uplifts. The annual rates of surface movements ranged between -11 cm (subsiding regions) and +3 cm (uplifting regions). The main objective of this paper is to identify the relationship between seismic phenomena and observed variations in the local gravity field distribution, factoring in the mining activity performed and changes in terrain relief. However, the data presented in the article indicate that in the coal mines, in the process of flooding, there are threats to the surface similar to those during the mining period (surface deformations and soil vibrations). In view of the collected data, their intensity is lower than of those observed during the mine’s operation. As the gravity field is the primary factor shaping the dynamics of a geological medium, the research results indicate that gravity monitoring is essential in studies of safety in post-mining lands.

6

Transport pionowy w kopalni ze wsparciem chmury

Dozór Techniczny

|

2024

|

z. 2

s. 16--17

PL

W kopalniach górnicze wyciągi szybowe mają status obiektów podstawowych, które znajdują się pod nadzorem Urzędów Górniczych. Innymi słowy są to jedne z najważniejszych – ale i największych – instalacji, odpowiadających za transport ludzi i urobku w obu kierunkach. Są duże, skomplikowane i wykorzystują wiele urządzeń elektromechanicznych, łącznie z napędami o mocy nawet kilkunastu megawatów. W maszynie wyciągowej jest więc co się zepsuć.

7

The method for preliminary estimation of expenditures and time necessary for liquidation of a mining plant

Chmiela Andrzej, Smoliło Janusz

Mining Machines

|

2023

|

vol. 41, iss. 2

85--92

EN

A comprehensive scientific approach will facilitate rationalization processes and minimization of mine liquidation costs. The study, based on a statistical analysis of liquidation processes in 19 mining plants from 2015 to 2023, proposes a method for preliminary estimation of costs and time of potential liquidation of hard coal mines. The method can be used for preliminary estimation of mine liquidation costs and as a cost management tool. The method does not refer directly to the liquidation processes used in SRK S.A. therefore, it can also be used by any entity in mine liquidation process as a comparative tool for detailed and multi-criteria estimation of the costs of planned mine liquidation.

8

Technical aspects of liquidationof theshafts“Głowacki” inRybnik, “JasVI” and“JasII” inJastrzębie Zdrój, Poland

Smoliło Janusz, Piszczek Marek, Lubryka Mieczysława, Grycman Jerzy

Mining Machines

|

2023

|

vol. 41, iss. 3

175--185

EN

Mining plants liquidatingtheunnecessary objects, especially shafts, encounter difficulties related mainly to the selectionof appropriate technology. In this material, we present solutions fortwo more difficult cases. The first consists in liquidating the shaft without making dams and maintaining the water permeability of the backfilling(Głowacki shaft), while the second one is the liquidation of the shaft, leaving theladder compartment, pipelines and with the so-called artificial bottom which isin the shaft (Jas II shaft).

9

Technical and technological support of the technology of activatingthe process of gasification of thin coal seams

Falshtynskyi Volodymyr, Pererva Andrii, Chalyi Vladyslav, Psyuk Vladyslav, Dychkovskyi Roman

Mining Machines

|

2023

|

vol. 41, iss. 3

186--199

EN

According to the tests results of the technology of reverse jet flow, tobalancethe geometric and physical parameters of the active zones of the reaction channel of the underground gas generator during the gasification of low-power coal seams. The parameters of activation of the oxidizing and reducing zones of the fire blowout were established, taking into account the outgassing of the coal seam in space and time, the impactof mining and geological parametersas well asgeotechnical and thermochemical processes, securing the evenadvance of the fire blowout along the length of the reaction channel of the underground gas generator. It was established that the intensification of the gasification process of thin and ultrafine coal seams increases the quantitative and qualitative parametersof exothermic and endothermic reactions, which have an impacton increasing the efficiency of the underground georeactor and determines the quality parametersof the gasification product.

10

System of current collectors inertization for safety use in explosive atmosphere-testing and results

Drwięga Andrzej, Lesiak Krzysztof, Clausen Elisabeth, Getz Maximilian

Mining Machines

|

2023

|

vol. 41, iss. 4

274--284

EN

R&D work regarding the innovative mine transportation system, planned to be powered by the three-phase busbar, developed within theRFCS project "Increase of mines efficiency and health protection through the innovative transport system based on BUSDUCT" is discussed. Assumptions regarding the construction of the locomotive and the production of nitrogen from the air for inerting purposes are discussed in the first part, whereas in the second part adapting thecurrent collector’s brushes to nitrogen injection, the relevant CFD calculations, the stand for testing the inertization, are presented. Many interesting experiments on the effectiveness of inertization using explosive mixtures of hydrogen and air are illustrated, described and discussed.

11

Proper control of working conditions as a stimulator for reducing the incidence of pneumoconiosis in the coal mining industry

Mocek Kinga, Mocek Piotr

Mining Machines

|

2023

|

vol. 41, iss. 2

93--106

EN

Statistical data on occupational diseases recorded by the Institute of Occupational Medicine in Lodz, Poland, indicate a renewed increase in the number of cases of pneumoconiosis in Poland in recent years, especially in the PKD section of mining and quarrying industries. At the same time, in 2018 as a result of the implementation of directives of the European Parliament and the Council of the European Union, the changes were introduced to the Polish legislation in the area of protection of workers from the risk of exposure to carcinogenic or mutagenic agents related to the respirable fraction of crystalline silica found, among others, in mine dust. As a result of these solutions, since 2020 we have seen a spike in the number of miners employed in conditions of risk of carcinogenic dust. These facts indicate that despite the wide measurement of harmful factors in coal mines, the effectiveness of preventive measures taken does not bring tangible benefits, and OSH services have problems with the proper assessment of industrial dust hazards at workplaces. In the article, based on surveys, diagnostic (health) tests of workers and verification of the risk assessment methods used, the authors try to point out the most common mistakes made in estimating the level of risk associated with exposure to industrial dust.

12

Modelling the suspended monorail route stresses and deflections during the transport of heavy loads with use of diesel locomotives

Shyrin Leonid, Herasymenko Andrii, Inyutkin Ivan

Mining Machines

|

2023

|

vol. 41, iss. 2

132--142

EN

Based on the results of tests of the monorail transport system using suspended diesel locomotives with traditional transport beams and with the use of an innovative system of transport beams for the delivery of heavy loads, it was found that to reduce the dynamics of the load to the elements of the suspended route segments fastened to the arches of the arch support, it is beneficial to use the proposed an innovative technical solution that increases the reliability of the route catches to the support arches, which is important when transporting heavy loads. The new solution significantly reduces the dynamic loads to the route catches to the support arches by redistributing the load over a greater number of sections of the suspended monorail route. It has been proven that during the period of intensification of preparatory work, these technical solutions make it possible to keep to the timely preparation of new mining pillars and are perceived as a promising direction for improving the existing transport system for the mines of the region and ensuring the operational parameters of mining transport equipment at a high technical level in the specific conditions of the mines of Western Donbass.

13

Research on Electric Leakage Protection to Improve Electrical Safety in Underground Mining in Vietnam

Nguyen Truong Giang, Nguyen Thac Khanh, Ngo Xuan Cuong, Do Nhu Y.

Inżynieria Mineralna

|

2023

|

no. 2, vol. 1

209--214

EN

To ensure safety in underground mining, it is imperative to equip yourself with electric leakage protection. Today, underground mines are gaining a high degree of mechanization and using more power electronics to enhance the operation and organization of power supplies, including the application of power electronics for DC power transmission in mining. i.e., separate the rectifier (AC-DC) from the inverter (DC-AC) with a long DC cable. The transmission of DC power changes the structure of the mine power network; then there will appear a power network with an industrial frequency of 50 Hz, a DC power network, and a power network after the variable frequency inverter. Due to the mutual interaction between DC power networks and AC power networks, leakage protection devices are unreliable, causing unsafe conditions in mining. The content of the article is to determine the leakage current in the power network when using converters in DC power transmission in mining. The research results are the basis for calculating and selecting leakage protection equipment for the purpose of improving safety in underground mining in Vietnam.

14

Identifying the Potential Application of Unmanned Aerial Vehicle Technology in Mine Waste Dumps

Nguyen Ba Dung

Inżynieria Mineralna

|

2023

|

no. 2, vol. 1

163--172

EN

In recent years, unmanned aerial vehicles (UAV) have been applied in the mining sector for a variety of purposes. This paper discusses the use of UAVs in the management of mine waste dumps based on analyzing scientific publications (January 2010 to May 2023). Three bibliography databases including Scopus, Google Scholar, and Web of Science were used to perform a thorough assessment of the literature. This study provides a comprehensive overview of UAV applications in mine waste dumps including environmental management, terrain surveying and 3D modeling, and safety and risk management. The obtained results of the study hope to give a technical reference, enhancing the understanding of UAV monitoring in mine waste dump.

15

Przebudowa systemu odwodnienia pod nowe fronty zwałowe w KWB Turów

Kukuć Marta

Pompy, Pompownie

|

2022

|

nr 1

54--57

PL

Przebudowa systemu odwodnienia polegała m.in. na likwidacji pompowni i układu rowów oraz budowie nowego systemu drenaży wraz ze studniami głębinowymi oraz instalacją elektryczną. Jak przebiegła ta inwestycja?

16

Odwadnianie kopalni na przykładzie Zakładów Górniczych Lubin

Drewniak Mariusz, Miller Radosław, Tyrakowski Robert

Pompy, Pompownie

|

2022

|

nr 2

54--62

PL

W artykule przedstawiono warunki hydrogeologiczne, schemat odwadniania i urządzenia zabudowane na pompowniach głównego i rejonowego odwadniania O/ZG „Lubin”. Zastosowanie systemów sterowania i monitoringu pozwoliło na wprowadzenie automatyzacji i zdalnego sterowania, przyczyniając się między innymi do wzrostu bezpieczeństwa pracy, z jednoczesną obniżką kosztów.

17

Accident analysis of mining industry in the United States - a retrospective study for 36 years

Rahimi Elham, Shekarian Younes, Shekarian Naser, Roghanchi Pedram

Journal of Sustainable Mining

|

2022

|

Vol. 21, iss. 1

27--44

EN

A retrospective study on accident analysis of the United States mines for 36 years was achieved using statistical analysis on the MSHA's accident databases between 1983 and 2018. A regression model of generalized estimation equation (GEE) was used for unbalanced panel data that provided 95,812 observations for 19,924 mine-ID-year in aggregate, coal, metal, and non-metal mines. The contributions of various parameters, including mine type, injured body part, days lost, age, and experience on the rate of accidents and injuries were investigated across the commodity types. The results showed coal miners in the East region are at a higher risk of accident. The results of regression analysis show that mine-tenured workers have a vital role in accident frequencies. Analysis of the injured body part on the injury rate indicates that the upper body injuries are the most significant among all mine types. Also, the fatality rate is significant in aggregate, and coal mines in comparison with metal and non-metal mines.

18

Analysis of mining accident levels against the background of changes in productivity and employment in the hard coal mining industry

Wyganowska Małgorzata, Tobór-Osadnik Katarzyna

Inżynieria Mineralna

|

2022

|

no. 1

117--121

EN

Occupational safety is an extremely important area of concern in every company. In mining companies, it occupies a particularly high position in the hierarchy of tasks and objectives. An accident at work is defined as a sudden event, caused by an external cause, resulting in injury or death of a worker and which occurred in connection with work. An accidental event consists of a number of interrelated adverse technical, organisational, environmental and human events. However, it is recognised that human error (interference) is usually the initiating factor of an accident at work. Among the causes of errors can be distinguished primarily: human failure, characteristics of the tasks performed, the conditions of the physical environment and the impact of the social environment, technical conditions. Therefore, within the framework of accident prevention, apart from the technical sphere, attention is also paid to the sphere of management – motivation, proper training, information flow, as well as assessment of psychophysical features of employees and their adaptation to the workplace. It is even more justified in the situation, where as it results from many years' data of the Central Statistical Office (GUS), the so-called human factor is responsible for about 60% of accidents at work in Poland. €e level of accidents can be analysed from several angles. Interesting is correlation of level of accidents from factors, which have influence on management. €en it is possible by controlling these elements to influence the number of accidents at work. It is especially important in such branch as mining, in which according to GUS data the highest number of accidents was registered in Poland. Intuitively, most causes of accidents, according to the literature, are caused by human factors. A fall in the accident rate should be a natural consequence of a reduction in the workforce. However, a reduction in employment must not result in a decrease in labour productivity. In this article, the authors present the results of a study of correlation between these three indicators: employment level, productivity and accident rate, in Polish coal mines over the period 2003–2020.

PL

Bezpieczeństwo pracy jest niezwykle istotnym obszarem troski w każdym przedsiębiorstwie. W przedsiębiorstwach wydobywczych zajmuje wyjątkowo wysoka pozycję w hierarchii zadań i celów. Wypadek przy pracy definiuje się jako zdarzenie nagłe, wywołane przyczyną zewnętrzną, powodujące uraz lub śmierć pracownika, a które nastąpiło w związku z pracą. Na zdarzenie wypadkowe składa się wiele powiązanych ze sobą niekorzystnych zdarzeń technicznych, organizacyjnych, środowiskowych i ludzkich. Uznaje się jednak, że zazwyczaj czynnikiem inicjującym wypadek przy pracy jest błąd (zakłócenie) człowieka. Pośród przyczyn popełniania błędów można wyróżnić przede wszystkim: niesprawność człowieka, cechy realizowanych zadań, warunki fizycznego środowiska oraz wpływ środowiska społecznego, uwarunkowania techniczne. Dlatego w ramach profilaktyki wypadkowości oprócz sfery technicznej zwraca się uwagę również na sferę zarządzania – motywację, prawidłowe szkolenie, przepływ informacji, a także ocena cech psychofizycznych pracowników i ich dopasowania do stanowiska pracy. Jest to tym bardziej uzasadnione w sytuacji, gdzie jak wynika z wieloletnich danych GUS, za około 60% wypadków przy pracy w Polsce odpowiedzialny jest tzw. czynnik ludzki. Poziom wypadkowości można rozpatrywać w kilku ujęciach. Interesująca jest korelacja poziomu wypadkowości od czynników, na które ma wpływ kierownictwo. Wtedy można sterując tymi elementami wpływać na liczbę wypadków przy pracy. Jest to szczególnie ważne w takiej branży jak górnictwo, w którym według danych GUS odnotowano ich najwięcej w Polsce. Intuicyjnie naturalnym następstwem zmniejszenia zatrudnienia powinien być spadek poziomu wypadkowości. Jednakże zmniejszenie stanu zatrudnienia nie może powodować spadku wydajności pracy. W artykule autorki zaprezentowały wyniki badania korelacji między tymi trzema wskaźnikamiwskaźnikami: poziomem zatrudnienia,wydajnością i wypadkowością, w polskich kopalniach węgla kamiennego na przestrzeni lat 2003–2020.

19

Bezpieczne kopalnie - wyzwania współczesnego górnictwa

Dozór Techniczny

|

2022

|

z. 2

2--3

PL

Globalna produkcja górnicza osiąga właśnie najwyższe poziomy w historii – w 2018 roku liczba ta wynosiła ponad 17,7 miliarda ton. Wraz z rozwojem górnictwa, rośnie również zapotrzebowanie na wdrażanie rozwiązań, które pomogą w większym stopniu zadbać o bezpieczeństwo pracowników kopalni. Z pomocą przychodzi technologia, która nie tylko minimalizuje ryzyko, ale pozwala podnosić efektywność operacyjną.

20

Mobile working platform unit as a mean for improvement of safety and convenience of emergency shaft works

Małkowski Piotr, Kamiński Paweł, Neduzha Larysa

Mining Machines

|

2021

|

no. 4

2--11

EN

A level of mine safety is related directly to the condition of its shafts. Thus regular monitoring and maintenance of shaft lining and equipment is vital. However such works are always hard and dangerous, as they are conducted from conveyances. Working platforms are a significant improvement in case of emergency shaft works. However, they need some extremely precious time for assembly. An idea of pull out working platform combines safety and convenience of typical working platform with short time of its installation. Following work presents the idea and construction of the mobile working platform unit, which is a solution for improvement of shaft works conducted from the compartment of the conveyance, as the platform uses cage for transport and operation.