Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
next last
cannonical link button


Acta of Bioengineering and Biomechanics

Tytuł artykułu

Mechanical properties of the brain–skull interface

Autorzy Mazumder, M. M. G.  Bunt, S.  Mostayed, M.  Joldes, G.  Day, R.  Hart, R.  Wittek, A. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
EN Knowledge of the mechanical properties of the brain-skull interface is important for surgery simulation and injury biomechanics. These properties are known only to a limited extent. In this study we conducted in situ indentation of the sheep brain, and proposed to derive the macroscopic mechanical properties of the brain–skull interface from the results of these experiments. To the best of our knowledge, this is the first ever analysis of this kind. When conducting in situ indentation of the brain, the reaction force on the indentor was measured. After the indentation, a cylindrical sample of the brain tissue was extracted and subjected to uniaxial compression test. A model of the brain indentation experiment was built in the Finite Element (FE) solver ABAQUSTM. In the model, the mechanical properties of the brain tissue were assigned as obtained from the uniaxial compression test and the brain-skull interface was modeled as linear springs. The interface stiffness (defined as sum of stiffnesses of the springs divided by the interface area) was varied to obtain good agreement between the calculated and experimentally measured indentor force–displacement relationship. Such agreement was found to occur for the brain-skull interface stiffness of 11.45 (mm [to -1]/ Nmm [to 2].). This allowed identification of the overall mechanical properties of the brain–skull interface.
Słowa kluczowe
PL biomechanika   metoda elementów skończonych   właściwości mechaniczne  
EN biomechanics   brain-skull   interface   mechanical properties   FEM  
Wydawca Oficyna Wydawnicza Politechniki Wrocławskiej
Czasopismo Acta of Bioengineering and Biomechanics
Rocznik 2013
Tom Vol. 15, nr 2
Strony 3--11
Opis fizyczny Bibliogr. 38 poz., rys., tab., wykr.
autor Mazumder, M. M. G.
autor Bunt, S.
  • School of Anatomy, Physiology and Human Biology, University of Western Australia, Australia
autor Mostayed, M.
  • Intelligent Systems for Medicine Laboratory, University of Western Australia, Australia
autor Joldes, G.
  • Intelligent Systems for Medicine Laboratory, University of Western Australia, Australia
autor Day, R.
  • Department of Medical Physics, Royal Perth Hospital, Perth, Australia
autor Hart, R.
  • Department of Radiology, Royal Perth Hospital, Perth, Australia
autor Wittek, A.
  • Intelligent Systems for Medicine Laboratory, University of Western Australia, Australia
[1] OMMAYA A.K., Mechanical Properties of Tissues of the Nervous System, Journal of Biomechanics, 1968, Vol. 1, 127–138.
[2] MILLER K. (ed.), Biomechanics of the Brain, Springer New York, Dordrecht Heidelberg London, 2011, 117.
[3] FALLENSTEIN G.T., HULCE V.D., MELVIN J.W., Dynamic Mechanical Properties of Human Brain Tissue, Journal of Biomechanics, 1969, Vol. 2, 117–136.
[4] METZ H., MCELHANEY J., OMMAYA A.K., A Comparison of the Elasticity of Live, Dead, and Fixed Brain Tissue, Journal of Biomechanics, 1970, Vol. 3(4), 453–458.
[5] ESTES M.S., MCELHANEY J.H., Response of Brain Tissue of Compressive Loading, ASME, Paper No. 70, 1970.
[6] ARBOGAST K.B., MARGULIES S.S., Regional Differences in Mechanical Properties of the Porcine Central Nervous System, Proceedings of the 41st Stapp Car Crash Conference, 1997, SAE, 293–300.
[7] DONNELLY B.R., MEDIGE J., Shear Properties of Human Brain Tissue, Journal of Biomechanical Eng., 1997, Vol. 119(4), 423–432.
[8] MILLER K., CHINZEI K., Constitutive Modelling of Brain Tissue: Experiment and Theory, Journal of Biomechanics, 1997, Vol. 30, 1115–1121.
[9] ARBOGAST K.B., MARGULIES S.S., Material Characterization of the Brainstem from Oscillatory Shear Tests, Journal of Biomechanics, 1998, Vol. 31(9), 801–807.
[10] BRANDS D.W.A., BOVENDEERD P.H.M., PETERS G.W.M., WISMANS J.S.H.M., The Large Shear Strain Dynamic Behaviour of In-Vitro Porcine Brain Tissue and the Silicone Gel Model Material, Proceedings of the 44th Stapp Car Crash Conference, 2000, 44, 249–260.
[11] PRANGE M.T., MARGULIES S.S., Regional, Directional and Age-Dependent Properties of Brain Undergoing Large Deformation, Journal of Biomechanical Engineering, 2002, Vol. 124, 244–252.
[12] BILSTON L.E., LIU Z., PHAN-THIEN N., Linear Viscoelastic Properties of Bovine Brain Tissue in Shear, Biorheology, 1997, Vol. 34(6), 377–385.
[13] BILSTON L. E., LIU Z., PHAN-THIEN N., Large Strain Behavior of Brain Tissue in Shear: Some Experimental Data and Differential Constitutive Model, Biorheology, 2001, Vol. 38(4), 335–345.
[14] HRAPKO M., VAN DOMMELEN J.A., PETERS G.W., WISMANS J.S., The Mechanical Behaviour of Brain Tissue: Large Strain Response and Constitutive Modelling, Biorheology, 2006, Vol. 43(5), 623–636.
[15] VELARDI F., FRATERNALI F., ANGELILLO M., Anisotropic Constitutive Equations and Experimental Tensile Behavior of Brain Tissue, Biomechanics and Modeling in Mechanobiology, 2006, Vol. 5, 53–61.
[16] HAINES D.E., HARKEY H.L., AL-MEFTY O., The “Subdural” Space: A New Look at an Outdated Concept, Journal of Neurosurgery, 1993, Vol. 32, 111–120.
[17] JIN X., Biomechanical Response and Constitutive Modeling of Bovine Pia-Arachnoid Complex, Wayne State University PhD thesis, 2009.
[18] HU J., JIN X., LEE J.B., ZHANG L., CHAUDHARY V., GUTHIKONDA M., YANG K.H., KING A.I., Intraoperative Brain Shift Prediction Using a 3D Inhomogeneous Patient-Specific Finite Element Model, Journal of Neurosurgery, 2007, Vol. 106, 164–169.
[19] JI S., MARGULIES S., Brainstem Motion Within the Skull: Measurement of the Pons Displacement In Vivo, Journal of Biomechanics, 2007, Vol. 40(1), 92–99.
[20] MIGA M.I., PAULSEN K.D., HOOPES P.J., KENNEDY F.E., HARTOV A., ROBERTS D.W., In Vivo Modelling of Interstitial Pressure in the Brain Under Surgical Load Using Finite Elements, Journal of Biomechanical Engineering, 2000, Vol. 122(4), 354–363.
[21] WITTEK A., OMORI K., Parametric Study of Effects of Brain–Skull Boundary Conditions and Brain Material Properties on Responses of Simplified Finite Element Brain Model Under Angular Acceleration Impulse in Sagittal Plane, JSME International Journal Series C, 2003, Vol. 46(4), 1388–1399.
[22] WITTEK A., KIKINIS R., WARFIELD S.K., MILLER K., Brain Shift Computation Using a Fully Nonlinear Biomechanical Model, Proceedings of the 8th International Conference on Medical Image Computing and Computer-Assisted Intervention (MICCAI) LNCS, 2005, Vol. 8(2), 583–590.
[23] WITTEK, A., MILLER K., KIKINIS R., WARFIELD S.K., Patient-Specific Model of Brain Deformation: Application to Medical Image Registration, Journal of Biomechanics, 2007, 40, 919–929.
[24] ABAQUS I., ABAQUS Online Documentation: Version 6.7-1, 2007.
[25] Instron, Documentation of 5948 MicroTester Ultra-High Precision System for Mechanical Testing, (available from:
[26] OGDEN R.W., Large deformation isotropic elasticity – On the Correlation of Theory and Experiment for Incompressible Rubberlike Solids, Proceedings of the Royal Society of London, Series A, Mathematical and Physical Sciences, 1972, Vol. 326, 565–584.
[27] MILLER K., CHINZEI K., Mechanical Properties of Brain Tissue in Tension, Journal of Biomechanics, 2002, Vol. 30, 1115–1121.
[28] MAGNOTTA V., LI W., GROSLAND N., Comparison of Displacement-Based and Force-Based Mapped Meshing, Workshop on Computational Biomechanics for Medicine at MICCAI, Insight Journal, 2008.
[29] ABAQUS/CAE User’s manual, ABAQUS Online Documentation: Version 6.10, 2010.
[30] MA J., W. A., SINGH S., JOLDES G., WASHIO T., CHINZEI K., MILLER K., Evaluation of Accuracy of Non-Linear Finite Element Computations for Surgical Simulation: Study Using Brain Phantom, Computer Methods in Biomechanics and Biomedical Engineering, 2010, Vol. 13(6), 783–794.
[31] ZHANG Z., Flexible Camera Calibration by Viewing a Plane from Unknown Orientations, Proceedings of International Conference on Computer Vision in Greece, 1999.
[32] ZHANG Z., A Flexible New Technique for Camera Calibration, IEEE Transactions of Pattern Analysis and Machine Intelligence, 2000, Vol. 22(11), 1330–1334.
[33] BOUGUET J.Y., Documentation of a complete Camera Calibration Toolbox for Matlab [Internet], California Institute of Technology, (c) 1999–2008, (cited 2009 May 19, available from:
[34] SOLOMON C., BRECKON T., LOGAN L.D., Fundamentals of Digital Image Processing, Willey-Blackwell, 2011, 230–231.
[35] LOGAN L.D., A First Course in the Finite Element Method, Brooks/Cole, 2002, 430–432.
[36] COATS B., STEPHANIE A.E., SULLIVAN S., MARGULIES S.S., Finite Element Model Predictions of Intracranial Hemorrhage from Non-Impact, Rapid Head Rotations in the Piglet, International Journal of Developmental Neuroscience, 2012, Vol. 30(3), 191–200.
[37] BAGHAEI S.M., SADEGH A.M., RAJAAI S.M., An Analytical Model for Investigating the Role of Meningeal Interfaces in the Brain Motion Relative to the Skull in Low-Velocity Head Impacts. International Journal of Biomedical Engineering Technology, 2011, Vol. 5(1), 61–67.
[38] FENG Y., ABNEY T.M., OKAMOTO R.J., PLESS R.B., GENIN G.M., BAYLY P.V., Relative Brain Displacement and Deformation During Constrained Mild Frontal Head Impact, Journal of Royal Society Interface, 2010, Vol. 7(53), 1677–1688.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-f57ac77b-a550-4873-b44f-763c356345b9