PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Electrical and piezoresistive sensing capacities of cement paste with multi-walled carbon nanotubes

Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
This study examined the feasibility of using multi-walled carbon nanotubes (MWCNTs) in cement paste for piezoresistive sensors. Two types of MWCNTs with different carbon content (>90% and >99%) were incorporated into cement paste at 1% by weight of binder (1 wt%). Plain cement paste and cement composites including 1 wt% graphite nanofiber (GNF) and graphene (G) were also considered for comparisons of the electrical conductivity. The test results indicate that the MWCNTs more effectively improved the conductivity of the cement paste than GNF and G. In addition, composites with MWCNTs with lower flowability had less resistivity than those with higher flowability. The size effect in electrical resistivity was observed in the cement pastes with and without the carbon-based nanomaterials, but it was mitigated by incorporating MWCNTs in the cement paste. The stresses and strains under cyclic compression and monotonic tension were well simulated by the measured fraction change in the resistivity of the composites with 1 wt% MWCNTs. The gauge factor (GF) for the composites with 1 wt% MWCNTs was higher than that of commercially available strain gauges, and it was affected by the loading condition: a higher GF obtained under compression than under tension.
Rocznik
Strony
371--384
Opis fizyczny
Bibliogr. 38 poz., rys., tab., wykr.
Twórcy
autor
  • Department of Architectural Engineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul, 04763, Republic of Korea, dyyoo@hanyang.ac.kr
autor
  • School of Civil, Environmental and Architectural Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, Republic of Korea, ih-you@korea.ac.kr
autor
  • Future Strategy Center, Korea Railroad Research Institute, 176 Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do 16105, Republic of Korea, seungjunglee@krri.re.kr
Bibliografia
  • [1] J.L. Le, H. Du, S. Dai Pang, Use of 2D Graphene Nanoplatelets (GNP) in cement composites for structural health evaluation, Compos. Part B: Eng. 67 (2014) 555–563.
  • [2] F. Azhari, N. Banthia, Cement-based sensors with carbon fibers and carbon nanotubes for piezoresistive sensing, Cement Concr. Compos. 34 (7) (2012) 866–873.
  • [3] P.C. Chang, A. Flatau, S.C. Liu, Review paper: health monitoring of civil infrastructure, Struct. Health Monit. 2 (3) (2003) 257–267.
  • [4] P. Robins, S. Austin, J. Chandler, P. Jones, Flexural strain and crack width measurement of steel-fibre-reinforced concrete by optical grid and electrical gauge methods, Cement Concr. Res. 31 (5) (2001) 719–729.
  • [5] H.N. Li, D.S. Li, G.B. Song, Recent applications of fiber optic sensors to health monitoring in civil engineering, Eng. Struct. 26 (11) (2004) 1647–1657.
  • [6] N. Banthia, S. Djeridane, M. Pigeon, Electrical resistivity of carbon and steel micro-fiber reinforced cements, Cement Concr. Res. 22 (5) (1992) 804–814.
  • [7] S. Wen, D.D.L. Chung, A comparative study of steel-and carbon-fibre cement as piezoresistive strain sensors, Adv. Cement Res. 15 (3) (2003) 119–128.
  • [8] P.W. Chen, D.D.L. Chung, Improving the electrical conductivity of composites comprised of short conducting fibers in a nonconducting matrix: the addition of a nonconducting particulate filler, J. Electron. Mater. 24 (1) (1995) 47–51.
  • [9] S. Wen, D.D.L. Chung, Electromagnetic interference shielding reaching 70 dB in steel fiber cement, Cement Concr. Res. 34 (2) (2004) 329–332.
  • [10] X. Yu, E. Kwon, A carbon nanotube/cement composite with piezoresistive properties, Smart Mater. Struct. 18 (5) (2009) 055010.
  • [11] A. D'Alessandro, M. Rallini, F. Ubertini, A.L. Materazzi, J.M. Kenny, Investigations on scalable fabrication procedures for self-sensing carbon nanotube cement-matrix composites for SHM applications, Cement Concr. Compos. 65 (2016) 200–213.
  • [12] G.M. Kim, F. Naeem, H.K. Kim, H.K. Lee, Heating and heat-dependent mechanical characteristics of CNT-embedded cementitious composites, Compos. Struct. 136 (2016) 162– 170.
  • [13] M.S. Konsta-Gdoutos, C.A. Aza, Self sensing carbon nanotube (CNT) and nanofiber (CNF) cementitious composites for real time damage assessment in smart structures, Cement Concr. Compos. 53 (2014) 162–169.
  • [14] H. Asadi, M. Souri, Q. Wang, A numerical study on flow-induced instabilities of supersonic FG-CNT reinforced composite flat panels in thermal environments, Compos. Struct. 171 (2017) 113–125.
  • [15] H. Asadi, Q. Wang, An investigation on the aeroelastic flutter characteristics of FG-CNTRC beams in the supersonic flow, Compos. Part B: Eng. 116 (2017) 486–499.
  • [16] H. Asadi, Numerical simulation of the fluid–solid interaction for CNT reinforced functionally graded cylindrical shells in thermal environments, Acta Astronaut. 138 (2017) 214–224.
  • [17] D.Y. Yoo, I. You, S.J. Lee, Electrical properties of cement-based composites with carbon nanotubes, graphene, and graphite nanofibers, Sensors 17 (5) (2017) 1064–1076.
  • [18] A. Abrishambaf, J.A. Barros, V.M. Cunha, Relation between fibre distribution and post-cracking behaviour in steel fibre reinforced self-compacting concrete panels, Cement Concr. Res. 51 (2013) 57–66.
  • [19] ASTM C1437, Standard Test Method for Flow of Hydraulic Cement Mortar, ASTM International, West Conshohocken, PA, 2013, pp. 1–2.
  • [20] J.L. Fraga, J.M. del Campo, J.Á. García, Carbon nanotube-cement composites in the construction industry: 1952–2014. A state of the art review, in: 2nd International Conference on Emerging Trends in Engineering and Technology (ICETET'2014), May 30–31, London, UK, (2014) 137–144.
  • [21] Q. Zhang, J.Q. Huang, M.Q. Zhao, W.Z. Qian, F. Wei, Carbon nanotube mass production: principles and processes, ChemSusChem 4 (7) (2011) 864–889.
  • [22] M.F. Yu, B.S. Files, S. Arepalli, R.S. Ruoff, Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties, Phys. Rev. Lett. 84 (24) (2000) 5552–5555.
  • [23] D.Y. Yoo, G.S. Ryu, T. Yuan, K.T. Koh, Mitigating shrinkage cracking in posttensioning grout using shrinkage-reducing admixture, Cement Concr. Compos. 81 (2017) 97–108.
  • [24] B. Chen, K. Wu, W. Yao, Conductivity of carbon fiber reinforced cement-based composites, Cement Concr. Compos. 26 (4) (2004) 291–297.
  • [25] E. Teomete, Transverse strain sensitivity of steel fiber reinforced cement composites tested by compression and split tensile tests, Construc. Build. Mater. 55 (2014) 136–145.
  • [26] M. Li, V.C. Li, Rheology, fiber dispersion, and robust properties of engineered cementitious composites, Mater. Struct. 46 (3) (2013) 405–420.
  • [27] J. Peng, D. Deng, H. Huang, Q. Yuan, J. Peng, Influence of superplasticizer on the rheology of fresh cement asphalt paste, Case Stud. Construc. Mater. 3 (2015) 9–18.
  • [28] P. Xie, P. Gu, J.J. Beaudoin, Electrical percolation phenomena in cement composites containing conductive fibres, J. Mater. Sci. 31 (15) (1996) 4093–4097.
  • [29] S. Wen, D.D. Chung, Effects of strain and damage on strain-sensing ability of carbon fiber cement, J. Mater. Civ. Eng. 18 (3) (2006) 355–360.
  • [30] W. Weibull, A statistical theory of the strength of materials, Proc. R. Swed. Inst. Eng. Res. 151 (1939) 1–45.
  • [31] P.K. Metha, P.J.M. Monteiro, Concrete: Microstructure, Properties, and Materials, 3rd edition, McGraw-Hill Publishing, 2006.
  • [32] B. Han, X. Yu, J. Ou, Effect of water content on the piezoresistivity of MWNT/cement composites, J. Mater. Sci. 45 (14) (2010) 3714–3719.
  • [33] H. Li, H.G. Xiao, J.P. Ou, Effect of compressive strain on electrical resistivity of carbon black-filled cement-based composites, Cement Concr. Compos. 28 (9) (2006) 824–828.
  • [34] E. García-Macías, A. D'Alessandro, R. Castro-Triguero, D. Pérez-Mira, F. Ubertini, Micromechanics modeling of the uniaxial strain-sensing property of carbon nanotube cement-matrix composites for SHM applications, Compos. Struct. 163 (2017) 195–215.
  • [35] http://www.kyowa-ei.com/eng/download/technical/ strain_gages/pdf_index_001_eng.pdf.
  • [36] R.S. Ruoff, D. Qian, W.K. Liu, Mechanical properties of carbon nanotubes: theoretical predictions and experimental measurements, C. R. Phys. 4 (9) (2003) 993–1008.
  • [37] S.N. Arshad, M. Naraghi, I. Chasiotis, Strong carbon nanofibers from electrospun polyacrylonitrile, Carbon 49 (5) (2011) 1710–1719.
  • [38] C. Lee, X. Wei, J.W. Kysar, J. Hone, Measurement of the elastic properties and intrinsic strength of monolayer graphene, Science 321 (5887) (2008) 385–388.
Uwagi
PL
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018)
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-f1ca3f89-132f-4763-9324-e17e7e87bb96
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.