Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-e628060b-f64b-437d-afd3-ad096826aadb

Czasopismo

Archives of Metallurgy and Materials

Tytuł artykułu

Prediction and Optimization of Magnetic Properties of Laser Welded AISI 430 Stainless Steels

Autorzy Mostaan, H.  Rafiei, M. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
Abstrakty
EN The AISI 430 stainless steel with ferritic structure is a low cost material for replacing austenitic stainless steel because of its higher yield strength, higher ductility and also better polarisation resistance in harsh environments. The applications of AISI 430 stainless steel are limited due to insignificant ductility and some undesirable changes of magnetic properties of its weld area with different microstructures. In this research, a study has been done to explore the effects of parameters of laser welding process, namely, welding speed, laser lamping current, and pulse duration, on the coercivity of laser welded AISI 430 stainless steel. Vibrating sample magnetometery has been used used to measure the values of magnetic properties. Observation of microstructural changes and also texture analysis were implemented in order to elucidate the change mechanism of magnetic properties in the welded sections. The results indicated that the laser welded samples undergo a considerable change in magnetic properties. These changes were attributed to the significant grain growth which these grains are ideally oriented in the easiest direction of magnetization and also formation of some non-magnetic phases. The main effects of the above-mentioned factors and the interaction effects with other factors were evaluated quantitatively. The analysis considered the effect of lamping current (175-200 A), pulse duration (10-20 ms) and travel speed (2-10 mm/min) on the coercivity of laser welded samples.
Słowa kluczowe
EN AISI 430   response surface methodology   laser welding   magnetic properties  
Wydawca Polish Academy of Sciences, Committee of Metallurgy, Institute of Metallurgy and Materials Science
Czasopismo Archives of Metallurgy and Materials
Rocznik 2018
Tom Vol. 63, iss. 4
Strony 1673--1682
Opis fizyczny Bibliogr. 15 poz., fot., rys., tab., wzory
Twórcy
autor Mostaan, H.
  • Department of Materials Engineering and Metallurgy, Faculty of Engineering, Arak University, Arak 38156-8-8349, Iran, H-mostaan@araku.ac.ir
autor Rafiei, M.
  • Advanced Materials Research Center, Department of Materials Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
Bibliografia
[1] G. Mallaiah, P. R. Reddy, A. Kumar, Procedia Mater. Sci. 6, 1740-1751 (2014).
[2] M. O. H. Amuda, S. Mridha, Mater. Des. 47, 365-371 (2013), doi:10.1016/j.matdes.2012.12.008.
[3] K. D. Lippold JC, Welding metallurgy and weldability of stainless steels, John Wiley & Sons, New Jersey, 2005.
[4] K. D. Ramkumar, A. Chandrasekhar, A. K. Singh, S. Ahuja, A. Agarwal, N. Arivazhagan, A. M. Rabel, J. Manuf. Process. 20, 54-69 (2015).
[5] P. Oxley, J. Goodell, R. Molt, J. Magn. Magn. Mater. 321, 2107-2114 (2009).
[6] G. Mallaiah, A. Kumar, P. Ravinder Reddy, G. Madhusudhan Reddy, Mater. Des. 36, 443-450 (2012).
[7] L. Battistini, R. Benasciutti, A. Tassi, J. Magn. Magn. Mater. 133, 603-606 (1994).
[8] M. O. H. Amuda, S. Mridha, Adv. Mater. Res. 86, 1165-1172 (2010).
[9] M. B. Bilgin, C. Meran, O. E. Canyurt, Int. J. Adv. Manuf. Technol. 77, 2221-2233 (2014).
[10] S. Kou, Welding Metallurgy, 2003. doi:10.1016/0022-4596(88)90042-4.
[11] M. Alizadeh-Sh, S. P. H. Marashi, M. Pouranvari, Mater. Des. 56, 258-263 (2014).
[12] V. A. Ventrella, J. R. Berretta, W. de Rossi, J. Mater. Process. Technol. 210, 1838-1843 (2010).
[13] V. A. Ventrella, J. R. Berretta, W. de Rossi, Phys. Procedia. 12, 347-354 (2011).
[14] Q. Han, D. Kim, D. Kim, H. Lee, N. Kim, J. Mater. Process. Technol. 212, 1116-1122 (2012).
[15] R. Myers, D. Montgomery, C. Anderson-Cook, Response Surface methodology: process and product optimization using designed experiments, John Wiley & Sons, New Jersey, 2009.
Uwagi
PL Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-e628060b-f64b-437d-afd3-ad096826aadb
Identyfikatory
DOI 10.24425/amm.2018.125092