Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-de343497-51d5-46a9-904b-abc26a64b255

Czasopismo

Journal of Achievements in Materials and Manufacturing Engineering

Tytuł artykułu

Manufacturing of EN AW6061 matrix composites reinforced by halloysite nanotubes

Autorzy Dobrzański, L. A.  Tomiczek, B.  Adamiak, M. 
Treść / Zawartość http://www.journalamme.org
Warianty tytułu
Języki publikacji EN
Abstrakty
EN Purpose: The core of the work consists in the elaboration of composite materials of aluminium alloy matrix, manufactured with the use of powder metallurgy technologies, including mechanical milling and hot extrusion and in determining the influence of the share of halloysite nanotubes - as the reinforcing phase on the structure and mechanical properties of fabricated composites. Design/methodology/approach: Mechanical milling and hot extrusion are considering as a method for fabricating composite metal powders with a controlled fine microstructure. It is possible by the repeated fracturing and re-welding of powders particles mixture in a highly energetic ball mill. Findings: It has been confirmed that halloysite nanotubes can be applied as a effective reinforcement in the aluminium matrix composites. High energy ball milling as a method of mechanical milling improves the distribution of the halloysite reinforcing particles throughout the aluminium matrix, simultaneously reducing the size of particles. Research limitations/implications: Contributes to research on structure and properties of aluminium alloy matrix composite material reinforced with mineral nanoparticles. Practical implications: The apparent density changes versus milling time can be used to control the composite powders production by mechanical milling and the presence of halloysite reinforcements particles accelerates the mechanical milling process. Conducted research shows that applied technology of composite materials production allows to obtain very good microstructural characteristics. Originality/value: The application of halloysite nanotubes as the reinforcing phase of metal composite materials is a novel assumption of the discussed work and an interesting challenge whereof realization would enable to use this mineral clay in an innovative and cost effective way.
Słowa kluczowe
EN aluminium matrix composites   halloysite nanotubes   mechanical milling   hot extrusion  
Wydawca International OCSCO World Press
Czasopismo Journal of Achievements in Materials and Manufacturing Engineering
Rocznik 2011
Tom Vol. 49, nr 1
Strony 82--89
Opis fizyczny Bibliogr. 21 poz., rys., tab.
Twórcy
autor Dobrzański, L. A.
  • Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland
autor Tomiczek, B.
  • Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland, blazej.tomiczek@polsl.pl
autor Adamiak, M.
  • Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland
Bibliografia
[1] W. Hufenbach, M. Gude, A. Czulak, J. Śleziona, A. Dolata-Grosz, M. Dyzia, Develompment of textile-reinforced carbon fibre aluminium composites manufactured with gas pressure infiltration methods, Journal of Achievements in Materials and Manufacturing Engineering 35/2 (2009) 177-183.
[2] E. Bayraktar, D. Katundi, Development of a new aluminium matrix composite reinforced with iron oxide (Fe3O4), Journal of Achievements in Materials and Manufacturing Engineering 38/1 (2010) 7-14.
[3] J.W. Kaczmar, K. Naplocha, Wear behaviour of composite materials based on 2024 Al-alloy reinforced with S alumina fibres, Journal of Achievements in Materials and Manufacturing Engineering 43/1 (2010) 88-93.
[4] G. Matula, Carbide alloyed composite manufactured with the Powder Injection Moulding method and sinterhardened, Journal of Achievements in Materials and Manufacturing Engineering 42 (2010) 164-171.
[5] L.A. Dobrzański, M. Kremzer, A. Nagel, Structure and properties of ceramic preforms based on Al2O3 particles, Journal of Achievements in Materials and Manufacturing Engineering 35/1 (2009) 7-13.
[6] K. Milos, I. Juric, P. Skorput, Aluminium-based composite materials in construction of transport means, Promet-Traffic & Transportation 23/2 (2011) 87-96.
[7] F. Felli, A. Brotzu, E. DiRusso, F. Pinna, Structure, fracture toughness, and fatigue of two aluminium matrix composites produced by vertical squeeze casting technique, Materials Science and Technology 13/5 (1997) 420-429
[8] M. Hetmańczyk, L. Swadźba, B. Mendala, Advanced materials and protective coatings in aero-engines application, Journal of Achievements in Materials and Manufacturing Engineering 24/1 (2007) 372-381.
[9] A. Warner, J. Bell, T. Stephenson, Opportunities for new graphitic aluminium metal matrix composite, Materials Science and Technology 14/9-10 (1998) 843-850.
[10] M. Rosso, Ceramic and metal matrix composites: route and properties, Journal of Achievements in Materials and Manufacturing Engineering 12 (2003) 35-50.
[11] M. Adamiak, Mechanical alloying for fabrication of aluminium matrix composite powders with Ti-Al intermetallics reinforcement, Journal of Achievements in Materials and Manufacturing Engineering 31/2 (2008) 191-196.
[12] M. Adamiak, J.B. Fogagnolo, E.M. Ruiz-Navas, L.A. Dobrzański, J.T. Torralba, Mechanically milled AA6061/Ti3Al)p MMC reinforced with intermetallics - the structure and properties, Journal of Materials Processing Technology 155156 (2004) 2002-2006.
[13] J.B. Fogagnolo, E.M. Ruiz-Navas, M.H. Robert, J.M. Torralba, 6061 Al reinforced with silicon nitride particles processed by mechanical milling, Scripta Materialia 47/4 (2002) 243-248.
[14] L.A. Dobrzański, M. Kremzer, A. Nagel, Application of pressure infiltration to the manufacturing of aluminium matrix composite materials with different reinforcement shape, Journal of Achievements in Materials and Manufacturing Engineering 24/2 (2007) 183-186.
[15] R. Purohit, R. Sagar, Fabrication and testing of Al-SiCp composite poppet valve guides, International Journal of Advanced Manufacturing Technology 51/5-8 (2010) 685-698.
[16] L.A. Dobrzański, A. Włodarczyk-Fligier, M. Adamiak, The structure and properties of PM composite materials based on EN AW-2124 aluminum alloy reinforced with the BN or Al2O3 ceramic particles, Journal of Materials Processing Technology 175/1-3 (2006) 186-191.
[17] M. Rafiei, M.H. Enayati, F. Karimzadeh, Characterization and formation mechanism of nanocrystalline (Fe,Ti)(3)Al intermetallic compound prepared by mechanical alloying, Journal of Alloys and Compounds 480/2 (2009) 392-296.
[18] A.M.K. Esawi, K. Morsi, A. Sayed, M. Tahera, S. Lanka, Effect of carbon nanotube (CNT) content on the mechanical properties of CNT-reinforced aluminium composites, Composites Science and Technology 70/16 (2010) 2237-2241.
[19] S. Deng, J. Zhang, L. Ye, J. Wu, Toughening epoxies with halloysite nanotubes, Polymer 49 (2008) 5119-5127.
[20] B. Lecouvet, J.G. Gutierrez, M. Sclavons, C. Bailly, Structure-property relationships in polyamide 12/halloysite nanotube nanocomposites, Polymer Degradation and Stability 96/2 (2011) 226-235.
[21] J. Cabała, Mineral composition and chemical characteristics of ecological halloysitic raw materials from Dunino, Scientific notebooks series - Mining, Vol. 248, Silesian University of Technology Publisher, 2001, 33-40 (in Polish).
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-de343497-51d5-46a9-904b-abc26a64b255
Identyfikatory