Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-ccd989cb-3883-4a8f-b656-59475a4374e4

Czasopismo

Archives of Metallurgy and Materials

Tytuł artykułu

The Influence of Deformation Method on the Microstructure and Properties of Magnesium Alloy WE43

Autorzy Bednarczyk, I.  Kuc, D.  Tkocz, M.  Tomaszewska, A. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
Abstrakty
EN The article presents tests results of the influence of deformation methods on the microstructure and properties of alloy WE43. There were direct extrusion tests and extrusion with KoBo method performed. An assessment of the influence of the methods of deformation on the microstructure and the mechanical properties of the achieved rods from alloy WE43 was conducted. There was an analysis of microstructure carried out with the use of light and scanning microscopy techniques in the initial state and after plastic deformation. Static tensile test was conducted in temperature of 350°C at a speed of 0.0001 m·s-1and microhardness measurements were performed of HV0.2. On the basis of the achieved mechanical tests results it was stated that in the temperature of 350°C for samples deformed with the use of KoBo method there was an effect of superplastic flow found. The value of elongation achieved was 250% which was 3 times higher than in case of classic extrusion (80%).
Słowa kluczowe
EN magnesium alloys   SPD method   microstructure   static tensile test  
Wydawca Polish Academy of Sciences, Committee of Metallurgy, Institute of Metallurgy and Materials Science
Czasopismo Archives of Metallurgy and Materials
Rocznik 2018
Tom Vol. 63, iss. 4
Strony 1975--1980
Opis fizyczny Bibliogr. 11 poz., fot., rys., tab., wykr.
Twórcy
autor Bednarczyk, I.
  • Silesian University of Technology, Faculty of Material Science and Metallurgy, 8 Krasińskiego Str., 40-019 Katowice, Poland, iwona.bednarczyk@polsl.pl
autor Kuc, D.
  • Silesian University of Technology, Faculty of Material Science and Metallurgy, 8 Krasińskiego Str., 40-019 Katowice, Poland
autor Tkocz, M.
  • Silesian University of Technology, Faculty of Material Science and Metallurgy, 8 Krasińskiego Str., 40-019 Katowice, Poland
autor Tomaszewska, A.
  • Silesian University of Technology, Faculty of Material Science and Metallurgy, 8 Krasińskiego Str., 40-019 Katowice, Poland
Bibliografia
[1] E. Hadasik, D. Kuc, G. Niewielski, R. Śliwa, Hutnik- Wiadomości-Hutnicze 8, 580-584, (2009).
[2] W. Bochniak, A. Korbel, P. Ostachowski, S. Źiółkowicz, J. Borowski, Plastic treatment of metals, Metal Forming 24 (2), 83-97 (2013).
[3] Bohlen Jan, Dietmar Letzig, Karl Ulrich Kainer, Materials Science Forum 546-549, 1-10 (2007).
[4] A. Korbel, W. Bochniak P. Ostachowski, A. Paliborek, International Journal of Materials Research 102, 10, 974-79 (2013).
[5] E. Hadasik, D. Kuc, Plastic treatment of metals, Metal Forming 24 (2), 131-147 (2013).
[6] Mrugała, I. Bednarczyk, Hutnik- Wiadomości- Hutnicze 8, 533-536 (2015).
[7] D. Kuc, I. Bednarczyk, G. Niewielski, Hutnik- Wiadomości- Hutnicze 8, 613-619, (2012).
[8] E. Hadasik, D. Kuc: Plastic treatment of magnesium alloys, Plastic treatment of metals, Metal Forming 24 (2), 131-147 (2013).
[9] Mrugała, I. Bednarczyk, P. Ostachowski, M. Łagoda, Rudy Metale R61 (3), 136- 139 (2016).
[10] R. E. Reed-Hill, W. D. Roberston, J. Metal. 9, 496-502 (2004).
[11] Y. Chen, Q. Wang, J. Peng, Ch. Zhai, W. Ding: Journal of Materials Processing Technology 182, 281-285 (2007).
Uwagi
EN This work was supported by Polish Ministry for Science and Higher Education under internal grant BK221/RM0/2018 for Institute of Materials Science, Silesian University of Technology, Poland
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-ccd989cb-3883-4a8f-b656-59475a4374e4
Identyfikatory
DOI 10.24425/amm.2018.125132