Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-c76b7fbd-fb84-4727-a82d-76836589a276

Czasopismo

Opto - Electronics Review

Tytuł artykułu

An all-fibre multi-parameter sensor for composite structures based on a chirped fibre Bragg grating

Autorzy Zhan, Y.  Yang, F.  Gu, K.  Wu, H.  Yu, M.  Li, L. 
Treść / Zawartość http://www.wat.edu.pl/review/optor/contents.htm
Warianty tytułu
Języki publikacji EN
Abstrakty
EN An all-fibre multi-parameter sensor for composite structures based on a chirped optical fibre Bragg grating (CFBG) has been studied theoretically and experimentally. The principle of multi-parameters sensing with a single CFBG is based on that the centre wavelength and the FWHM (full width at half maximum) in the reflection spectrum of a CFBG vary linearly with the temperature and/or the axial stress. A wavelength matched optical fibre long period grating (LPG) and another wavelength matched reference CFBG (CFBGR) have been used to interrogate the signal of the sensor CFBG (CFBGS). The temperature and strain of the composite structure have been monitored real-time with one CFBG as a single sensor head. The temperature resolution of 0.12ºC and the strain resolution of 1.1με for a composite structure have been realized in experiments. The experiment results agree well with the theoretical analyses.
Słowa kluczowe
EN optical fibre multi-parameter sensor   chirped fibre Bragg grating   composite structure   temperature   strain  
Wydawca Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Czasopismo Opto - Electronics Review
Rocznik 2013
Tom Vol. 21, No. 3
Strony 283--287
Opis fizyczny Bibliogr. 13 poz., wykr.
Twórcy
autor Zhan, Y.
  • State Key Laboratory for Modification of Chemical Fibres and Polymer Materials, Donghua University, 2999 North Remin Rd., Songjiang District, Shanghai 201602, China
autor Yang, F.
  • State Key Laboratory for Modification of Chemical Fibres and Polymer Materials, Donghua University, 2999 North Remin Rd., Songjiang District, Shanghai 201602, China, fuyang770519@163.com
autor Gu, K.
  • State Key Laboratory for Modification of Chemical Fibres and Polymer Materials, Donghua University, 2999 North Remin Rd., Songjiang District, Shanghai 201602, China
autor Wu, H.
  • State Key Laboratory for Modification of Chemical Fibres and Polymer Materials, Donghua University, 2999 North Remin Rd., Songjiang District, Shanghai 201602, China
autor Yu, M.
  • State Key Laboratory for Modification of Chemical Fibres and Polymer Materials, Donghua University, 2999 North Remin Rd., Songjiang District, Shanghai 201602, China
autor Li, L.
  • State Key Laboratory for Modification of Chemical Fibres and Polymer Materials, Donghua University, 2999 North Remin Rd., Songjiang District, Shanghai 201602, China
Bibliografia
1. W. W. Morey, "Fibre optic Bragg grating sensors", Proc. SPIE. 1169, 98-107 (1989).
2. G. Zhou and L. M. Sim, “Damage detection and assessment in fibre reinforced composite structures with embedded fibre optic sensors: review”, Smart Mater. Struct. 11, 925-939 (2002).
3. V. M. Murukeshan, P.Y. Chan, and L. Song, “Cure monitoring of smart composites using fibre Bragg grating based embedded sensors”, Sensor Actuat. A:Phys. 79, 153-161 (2000).
4. J. Leng, “Structural health monitoring of smart composite materials by using EFPI and FBG sensors”, Sensor Actuat. A:Phys. 103, 330-340 (2003).
5. J. S. Leng and A. Asundi, “Real-time cure monitoring of smart composite materials using extrinsic Fabry-Perot interfero-meter and fibre Bragg grating sensors”, Smart Mater. Struct., 11, 249-255 (2002).
6. S. Yashiro, N. Takeda, T. Okabe, and H. Sekine ,“A new approach to predicting multiple damage states in composite laminates with embedded FBG sensors”, Compos. Sci. Technol. 65, 659-667 (2005).
7. F. Jeannot, J. Cugnoni, J. Botsis, G. Thomas, and C. Dragan, “High-speed internal strain measurements in composite structures under dynamic load using embedded FBG sensors”, Compos. Struct. 92, 1905-1912 (2010).
8. S. Yashiro, T. Okabe, and N. Takeda, “Damage identification in a holed CFRP laminate using a chirped fibre Bragg grating sensor”, Compos. Sci. Technol. 67, 286-295 (2007).
9. Y. Zhao and Y.B. Liao, “Discrimination methods and demodulation techniques for fibre Bragg grating sensors”, Opt. Laser Eng. 41, 1-18 (2004).
10. O. Masaki, M. Shunsuke, and T. Kenichiro, “Influence of non-ideal chirped fibre Bragg grating characteristics on all-optical clock recovery based on the temporal Talbot effect”, Appl. Opt. 48, 679-690 (2009).
11. J. Palaniappan, H Wang, S. L. Ogin, A Thorne, and G. T. Reed, “Prediction of the reflected spectra from chirped fibre Bragg grating embedded within cracked crossly laminates”, Meas. Sci. Technol. 17, 1609-1614, (2006).
12. R. W. Fallon, L. Zhang, and L. A. Everall, “All fibre optical sensing system Bragg grating sensor interrogated by a long-period grating”, Meas. Sci. Technol. 9, 1969-1973 (1998).
13. Y. G. Zhan, S. L. Xue, Q. Y. Yang, and S. Q. Xiang, “A novel fibre Bragg grating high-temperature sensor”, Optik 119, 535-539 (2008).
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-c76b7fbd-fb84-4727-a82d-76836589a276
Identyfikatory
DOI 10.2478/s11772-013-0092-8