Archives of Metallurgy and Materials - Tom Vol. 65, iss. 4 (2020) - BazTech - Yadda

Tom - szczegóły

Tytuł artykułu

Vol. 65, iss. 4

Czasopismo

Archives of Metallurgy and Materials

Wydawca

Polish Academy of Sciences, Committee of Metallurgy, Institute of Metallurgy and Materials Science

Rocznik

2020

Identyfikatory

Zawartość wolumenu

Vol. 65, iss. 4
- artykuł: Effect of Continuous Welding on Microstructure and Mechanical Properties of Angle and T-Bar (Jang Jihoon, Yoon Changsuk, Lee Sangik, Lee Dong-Geun), s. 1245--1248
- artykuł: Effects of TiC Addition on Strain-Induced Martensite Transformation and Mechanical Properties of Nanocrystalline Fe-Mn Alloy Fabricated by Spark Plasma Sintering (Jeon Junhyub, Choi Seunggyu, Seo Namhyuk, Moon Young Hoon, Shon In-Jin, Lee Seok-Jae), s. 1249--1254
- artykuł: Microstructure and Mechanical Properties of Hot-deformed AlMg4 Alloys with the Variations of Mn, Fe, and Si Contents (Lee Da B., Kim Bong H., Choi Kweon H., Yang Seung Y., Kim Nam S., Ha Seong H., Yoon Young O., Lim Hyun K., Kim Shae, Hyun Soong K..), s. 1255--1259
- artykuł: Effect of Rhenium Addition on Microstructures and Mechanical Properties of Oxide Dispersion Strengthened Ferrtic Steels (Noh Sanghoon, Kang Suk Hoon, Kim Tae Kyu), s. 1261--1264
- artykuł: Effects of Adding Niobium and Vanadium to Fe-Based Oxide Dispersion Strengthened Alloy (Park Chun Woong, Choi Won June, Byun Jong Min, Kim Young Do), s. 1265--1268
- artykuł: Fabrication of Molybdenum Alloy with Distributed High-Entropy Alloy Via Pressureless Sintering (Choi Won June, Park Cheon Woong, Byun Jong Min, Kim Young Do), s. 1269--1272
- artykuł: Effect of Magnet Scrap Size on the Extraction Behavior of Heavy Rare Earth Elements by Liquid Metal Extraction (Nam Sun-Woo, Rasheed Mohammad Zarar, Park Sang-Min, Lee Sang-Hoon, Kim Do-Hyang, Kim Taek-Soo), s. 1273--1276
- artykuł: Wave Absorption Property of High Entropy Alloy Fabricated by Sol-Gel Process (Yang Suwon, Kim Jeong-Gon, Jeong Kwang-Pil, Choi Jin-Hyuk), s. 1277--1280
- artykuł: Effect of Mg Ratio on the Extraction of Dy from (Nd,Dy)-Fe-B Permanent Magnet Using Liquid Mg (Park Sang-Min, Nam Sun-Woo, Cho Ju-Young, Lee Sang-Hoon, Hyun Seung-Keun, Kim Taek-Soo), s. 1281--1285
- artykuł: Improvement of Microwave Absorption Characteristics by Coating Layer in Substituted U-Type Ferrites (Jeong Kwang-Pil, Kim Jeong-Gon, Yang Su-Won, Choi Jin-Hyuk, Park Seung-Young), s. 1287--1291
- artykuł: Effect of Temperature on the Plastic Deformability of Gas Atomized NdFeB Anisotropic Magnets (Cho Ju-Young, Choa Yong-Ho, Nam Sun-Woo, Rasheed Mohammad Zarar, Kim Taek-Soo), s. 1293--1296
- artykuł: Mechanical Properties and Corrosion Behaviors of Aged Ti-4Mo-4Cr-X (X = Sn, V, Zr) Alloys for Metallic Biomaterials (Lee Kwangmin, Lee Gunhee), s. 1297--1301
- artykuł: Phase Transitions and Electrochemical Corrosion Behaviors of Ti50Ni50-xCux Shape Memory Alloys for Metallic Biomaterials (Lee Kwangmin, Rho Sanghyun), s. 1303--1306
- artykuł: Study of Extrusion Temperature on Extrudability of Al-Zn-Cu Based Alloy (Kim Yong-Ho, Yoo Hyo-Sang, Lee Kyu-Seok, Lee Sung-Ho, Son Hyeon-Taek), s. 1307--1310
- artykuł: Microstructure and Mechanical Properties of Equiatomic and Non-Equiatomic TiMoTaNbV High Entropy Alloys Prepared Using Vacuum Arc Remelting (Lee Seongi, Lee Kwangmin), s. 1311--1315
- artykuł: Microstructure and Electrochemical Behaviors of Equiatomic TiMoVCrZr and Ti-rich TiMoVCrZr High-Entropy Alloys for Metallic Biomaterials (Song Hocheol, Lee Seongi, Lee Kwangmin), s. 1317--1322
- artykuł: Brazeability and Microstructure of Ag-28Cu Microjoining Filler Produced by High Energy Ball Milling (Sharma Ashutosh, Chae Myoung Jin, Ahn Byungmin), s. 1323--1327
- artykuł: A Facile Method for the Production of Sn-Ag Alloy by High Energy Ball Milling (Sharma Ashutosh, Ahn Byungmin), s. 1329--1333
- artykuł: Effect of Aspect Ratio on Iron-Ore Briquettes During Twin-Roll Briquetting (Kim Kang-Min, Bae Jong-Ho, Han Jeong-Whan), s. 1335--1339
- artykuł: Effect of Controlled Porosity on the Mechanical Properties of Ti-Zr-Sn-Mo Biomedical Alloys (Kim Yeon-Wook, Erlangga Bagus D., Do Dalhyun, Lee Seong-Min), s. 1341--1344
- artykuł: Electrospinning of Antimony Doped Tin Oxide Nanoparticle Dispersion for Transparent and Conductive Films (Cho Young-Sang, Han Minho, Woo Seung Hee), s. 1345--1350
- artykuł: A Study on the Synthesis of Lithium Carbonate (Li2CO3) from Waste Acidic Sludge (Choi Dong Hyeon, Wang Jei-Pil), s. 1351--1355
- artykuł: Microstructure and Mechanical Properties of Amorphous Hydrogenated DLC-Coated Ti-6Al-4V ELI Alloy with TiCN Interlayer Prepared by rf-PECVD (Lee Kwangmin, Kang Seokil), s. 1357--1360
- artykuł: Prediction of High Strain Rate Flow Behavior of 7175 Aluminum Alloy Based on Arrhenius-Type Constitutive Equations (Shin Young-Chul, Joung Dae-Kwan, Ha Seong-Ho, Choi Ho-Joon, Hyun Soong-Keun), s. 1361--1364
- artykuł: Deposition Characteristics of High-Thermal-Conductivity Steel in the Direct Energy Deposition Process and its Hardness Properties at High Temperatures (Son Jong-Youn, Shin Gwang-Yong, Lee Ki-Yong, Yoon Hi-Seak, Shim Do-Sik), s. 1365--1369
- artykuł: Development of Superior Thermal Protective Coating on Carbon Composites (Bae Soo Bin, Lee Ji Eun, Paik Jong Gyu, Cho Nam Choon, Lee Hyung Ik), s. 1371--1375
- artykuł: Effect of Variable Manganese Content on Microstructure of Al-Cu Alloys (Stąpór S., Górny M., Kawalec M., Gracz B.), s. 1377--1383
- artykuł: Effect of the Type of Inorganic Binder on the Properties of Microwave-Hardened Moulding Sands for Ablation Casting Technology (Puzio S., Kamińska J., Angrecki M., Major-Gabryś K.), s. 1385--1390
- artykuł: The Application of the Mechanochemical Synthesis for the Preparation of Advanced Ceramics Based on Barium Titanate (Garbarz-Glos B., Bąk W., Budziak A., Dulian P., Lisińska-Czekaj A., Czekaj D.), s. 1391--1396
- artykuł: Microspheres and Pellets of UO2 Prepared Via ADU by Complex Sol-Gel Process and ICHTJ Process (Brykala M., Rogowski M., Wawszczak D., Olczak T., Smolinski T.), s. 1397--1404
- artykuł: Numerical Modelling and Measurements of Temperature for Tests of Structural Transformations in Steels under Welding Conditions (Mikno Z., Stępień M., Grzesik B.), s. 1405--1415
- artykuł: Synthesis and Characterization of Co-Cs-Nd-Sr-Doped Perovskite-Rutile-Type Structure (Smolinski T., Zhao L., Rogowski M., Wawszczak D., Olczak T., Brykala M.), s. 1417--1423
- artykuł: Effect of Reclaim Addition on the Mechanical and Technological Properties of Moulding Sands Based on Pro-Ecological Furfuryl Resin (Kamińska J., Puzio S., Angrecki M., Łoś A.), s. 1425--1429
- artykuł: The Impact of Composition and the Densification Level of Furan Molding Compounds on the Strength of Large-Size Casting Molds (Petrus Ł., Bulanowski A., Kołakowski J., Urbanowicz M., Sobieraj J., Jelonek M., Brzeżański M., Zych J. S., Janerka K.), s. 1431--1436
- artykuł: Analysis of the Properties of EN AC 51200 Aluminum Alloy (Uhríčik M., Palček P., Chalupová M., Hanusová P., Kuchariková L.), s. 1437--1445
- artykuł: Thermomechanical Analysis of the Possibility of Using New Methods of Complex Extrusion for Manufacturing the Inner Toothing of Spline Sleeves (Michalczyk J., Wiewiórowska S.), s. 1447--1453
- artykuł: Corrosion Behaviour Correlation of the Secondary Aluminium Casts in Natural Atmosphere and Laboratory Conditions (Kuchariková L., Liptáková T., Tillová E., Bonek M., Medvecká D.), s. 1455--1462
- artykuł: Effect of Austempering Temperature on the Microstructure and Retained Austenite of Cast Bainitic Steel Used for Frogs in Railway Crossovers (Parzych S., Dziurka R., Goły M., Kulinowski B.), s. 1463--1468
- artykuł: Selected Cyclic Corrosion Tests in Automotive Industry (Biało Ł., Grodniewicz T., Żabiński P.), s. 1469--1476
- artykuł: Refinement of Al-5%Cu and Al-25%Cu Alloys by Means of KoBo Methods (Rodak K., Brzezińska A., Sobota J.), s. 1477--1482

rozwiń roczniki

JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.