Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first last
cannonical link button


Fatigue of Aircraft Structures

Tytuł artykułu

The MMM Expert System: From a Reference Signal to The Method Validation

Autorzy Witoś, M. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
EN This paper presents the first step in the methodological approach to the validation of the metal magnetic memory (MMM) method in the non-destructive testing (NDT) applications and in the systems used for diagnosis of early stages of material fatigue in mechanical constructions (structural health monitoring, SHM, and prognosis health management, PHM). The study is focused on the properties of the external natural source of magnetisation of the object under MMM examination and the impact of the magnetisation components. The precise data obtained from measurements of the Earth's geomagnetism (from ground stations and satellites) and the revised model of the Earth's magnetism can be applied in order to calibrate high sensitivity magnetic field sensors, validate the measurement results and extend the functional capacity of the MMM method.
Słowa kluczowe
EN geomagnetic field   magneto-mechanical effects   numerical model   SHM  
Wydawca Wydawnictwa Naukowe Instytutu Lotnictwa
Czasopismo Fatigue of Aircraft Structures
Rocznik 2012
Tom Iss. 4
Strony 123--140
Opis fizyczny Bibliogr. 47 poz., rys., tab., wykr., wzory
autor Witoś, M.
  • Air Force Institute of Technology, Warsaw, Poland
[1] Birss, R.R. & Faunce, C.A. (1971). Stress-Induced Magnetization in Small Magnetic Fields, Journal de Physique, Colloque C I, supplément au no 2-3, Tome 32, Février-Mars, page C 1 - 686-688.
[2] Altherton, D.L. & Jiles, D.C. (1986): Effects of stress on magnetization, NDT International, Vol. 19(1), pp. 15-19.
[3] Robertson, I.M. (1991): Magneto-Elastic Behaviour of Steels for Naval Applications, MRL Technical Report, MRL-TR-90-27, DSTO Materials Research Laboratory.
[4] Tae-Kyu Lee, Morris J.W., Seungkyun Lee, Jr. & Clarke, J. Detection of fatigue damage prior to crack initiation with scanning SQUID microscopy. Review of Progress in Quantitative Nondestructive Evaluation, Vol. 25.
[5] Witoś, M. (2011). Increasing the durability of turbine engine components through active diagnostics and control. Research works of AFIT, Issue 29 (in polish).
[6] Vlasov, V.T. & Dubov, A.A. (2004). Physical bases of the metal magnetic memory method, ZAO Tisso Publishing House.
[7] Liu Q., Lin J., Chen M., Wang C., Wang G., Zhao F.Z., Geng Y., Zheng Ch. (2008). A Study of Inspecting the Stress on Downhole Metal Casing in Oilfields with Magnetic Memory Method, Proc. of 17th World Conference on Nondestructive Testing, 25-28 Oct 2008, Shanghai, China.
[8] Hu B., Chen G., Shen G., Li L., Chen X. (2008). Study on Magnetic Memory Method (MMM) for Fatigue Evaluation, Proc. of 17th World Conference on Nondestructive Testing, 25-28 Oct 2008, Shanghai, China.
[9] Zhong L., Li L., Chen X. (2008). Progress in Nondestructive Evaluation of Stress Concentration with MMM Method, Proc. of 17th World Conference on Nondestructive Testing, 25-28 Oct 2008, Shanghai, China.
[10] Roskosz, M. (2011). Metal magnetic memory testing of welded joints of ferritic and austenitic steels, NDT&E International, Vol. 44, pp. 305-310. DOI:10.1016/j.ndteint.2011.01.008.
[11] Roskosz M., Rusin A. & Kotowicz J. (2010): The metal magnetic memory method in the diagnostics of power machinery components, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 43(1), pp. 362-370.
[12] Viana A., Rouve L-L., Cauffet G. & Coulomb J-L. (2011). Analytical Model for External Induction Variations of a Ferromagnetic Cylinder Undergoing High Mechanical Stresses in a Low Magnetic Field of Any Orientation. IEEE Transactions on Magnetics, Vol. 47, No. 5
[13] Dobmann, G. Physical basics and industrial applications of 3MA - micromagnetic multiparameter microstructure and stress analysis, Fraunhofer IZFP, Saarbrücken, Germany.
[14] Burrows, C.W. (1916). Correlation of the magnetic and mechanical properties of steel, Scientific Papers of the Bureau of Standards, No 272, Government Printing Office, Washington.
[15] Newnham, R. (2005). Properties of materials. Anisotropy, symmetry, structure. Oxford University Press.
[16] Fonteyn, K.A. (2010). Energy-based magneto-mechanical model for electrical steel sheets. Doctoral Dissertation, Aalto University, TKK Dissertations 234.
[17] Dapino, M.J. (1999). Nonlinear and hysteretic magnetomechanical model for magnetostrictive transducers. PhD Dissertation, Iowa State University.
[18] Gallaudet, E.F. (1896). Relation between length, elasticity and magnetization of iron and nickel wires. PhD Dissertation, Johns Hopkins University.
[19] Nagaoka H. & Honda K. (1898-1925). Researches on Magnetostriction. The Journal of the College of Science, Imperial University of Tokyo, Section 353.
[20] The Journal of the College of Science, Imperial University of Tokyo 1901-1908, Vol. XVI, Article 8-10, 12-14.
[21] Hobbie, Jr. J.R. (1922). Magnetostriction with small magnetizing fields. Physical Review, Vol. XIX, No. 5.
[22] Lee, E.W. (1955). Magnetostriction and Magnetomechanical Effects. Rep. Prog. Phys., Vol. 18, p. 184-229.
[23] Tomohiro Yamasaki, Shinji Yamamoto, Masahiko Hirao (1996). Effect of applied stresses on magnetostriction of low carbon steel. NDT&E International, Vol. 29(5), pp. 263-268.
[24] Smith C.M., Geo. W. Sherman, Jr. (1914). A study of the magnetic qualities of stressed iron and steel. Phys. Rev., N. S., 4, pp. 267-273.
[25] Sandford, R.L. (1924). Effect of stress on the magnetic properties of steel wire. Scientific Papers of the Bureau of Standards, Vol. 19, No 469-497.
[26] Kocańda, S. (1957). Wykrywanie wad metali metodą magnetyczną. PWN Warszawa.
[29] Witoś, M. (2012). The reference signal of geomagnetic field for MMM expert systems. Key Engineering Materials, Vol. 518, pp. 384-395. DOI:10.4028/
[30] Jankowski J. & Sucksdorff Ch. (1996). Guide for magnetic measurement and observatory practice, IAGA, Warsaw.
[31] Maus S. (2006). Plane and spherical harmonic representations of the geomagnetic field, CIRES, University of Colorado, February 16, 2006.
[32] Maus S., Macmillan S., McLean S., Hamilton B., Thomson A., Nair M., Rollins C. (2010). The US/UK World Magnetic Model for 2010-2015, NOAA Technical Report NESDIS/NGDC.
[33] Sabaka T.J. Earth’s dynamic magnetic field. The state of the art comprehensive model. GSFC
[37] Pharaoh T. & TESZ colleagues: Trans-European Suture Zone. Phanerozoic Accretion and the Evolution of Contrasting Continental Lithospheres.
[40] The largest magnetic storm on record. The “Carrington Event” of August 27th to September 7th 1859, recorded at Greenwich Observatory, London, British Geological Survey.
[43] Davis P.M., Pierce D.R., McPherron R.L., Dzurisin D., Murray Th., Malcom J.S., Johnston S. & Mueller R. (1984). A volcanomagnetic observation on Mount St. Helens, Washington, Geophysical Research Letters, Vol. 11(3), pp 233-236.
[44] Yasunori Nishida, Mitsuru Utsugi, Toru Mogi (2007). Tectonomagnetic study in the eastern part of Hokkaido, NE Japan (II): Magnetic fields related with the 2003 Tokachi-oki earthquake and the 2004 Kushiro-oki earthquake. Earth Planets Space, Vol. 59, pp. 1181-1186.
[45] Shu-Kun Hsu, Yi-Ching Yeh, Chung-Liang Lo, Andrew Tien-Shun Lin, and Wen-Bin Doo (2008). Link between Crustal Magnetization and Earthquakes in Taiwan. Terr. Atmos. Ocean. Sci., Vol. 19(5), pp. 445-450, DOI: 10.3319/TAO.2008.19.5.445(T).
[46] Meirav Bass (2010). Investigation of geodynamic phenomena from high-resolution magnetic measurements. M.Sc. Thesis to the Department of Geophysics and Planetary Sciences, Tel Aviv University, Jaruselem.
[47] Benoît St-Louis [ed.] (2011). Intermagnet technical reference manual, INTERMAGNET c/o British Geological Survey Murchison House, Edinburgh.
EN The study has been prepared under the research project “Monitoring of Technical State of Construction and Evaluation of its Lifespan” (MONIT) financially supported by the European Regional Development Fund and the Ministry of Regional Development of Poland in the Innovative Economy Operational Programme (POIG 1.2). The results presented in this paper rely on data collected at magnetic observatories. We thank the national institutes that support them and INTERMAGNET for promoting high standards of magnetic observatory practice (
PL Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-b1ab6468-f6e5-4639-b55f-476017f61e44
DOI 10.2478/v10164-012-0064-3