Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-b15b7e48-3770-43e6-85b9-cb15c1173bc4

Czasopismo

Archives of Metallurgy and Materials

Tytuł artykułu

Synergy of the Plastic Treatment HPT and Shot Peening in Aluminium Alloy Al-Mg-Mn-Sc-Zr

Autorzy Stegliński, M.  Byczkowska, P.  Sawicki, J.  Kaczmarek, Ł.  Januszewicz, B.  Klich, M. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
Abstrakty
EN An improvement in fatigue strength is one of the main factors enabling the use of high-durability Al-Mg-Mn-Sc-Zr alloys in functional components of mobile robots. As part of this study, a computer simulation was carried out using ANSYS LS-DYNA software that involved the hybridization of high pressure torsion (HPT) and shot peening (SP) forming processes. The numerical analysis was aimed at determining residual stresses and strains that affect the durability and stress characteristics of the analyzed Al alloy. Results of the study indicate that tensile stresses of σ = 300 MPa generated as a result of HPT are transformed into a beneficial stress of σ = 25 MPa resulting from plastic strains caused by SP surface treatment.
Słowa kluczowe
EN high-pressure torsion   shot peening   numerical analysis   residual stresses   fatigue strength  
Wydawca Polish Academy of Sciences, Committee of Metallurgy, Institute of Metallurgy and Materials Science
Czasopismo Archives of Metallurgy and Materials
Rocznik 2016
Tom Vol. 61, iss. 2B
Strony 1135--1142
Opis fizyczny Bibliogr. 17 poz., rys., tab., wykr.
Twórcy
autor Stegliński, M.
  • Lodz University of Technology, Institute of Materials Science and Engineering, 1/15 Stefanowskiego Str., 90-924 Lodz, Poland, mariusz.steglinski@p.lodz.pl
autor Byczkowska, P.
  • Lodz University of Technology, Institute of Materials Science and Engineering, 1/15 Stefanowskiego Str., 90-924 Lodz, Poland
autor Sawicki, J.
  • Lodz University of Technology, Institute of Materials Science and Engineering, 1/15 Stefanowskiego Str., 90-924 Lodz, Poland
autor Kaczmarek, Ł.
  • Lodz University of Technology, Institute of Materials Science and Engineering, 1/15 Stefanowskiego Str., 90-924 Lodz, Poland
autor Januszewicz, B.
  • Lodz University of Technology, Institute of Materials Science and Engineering, 1/15 Stefanowskiego Str., 90-924 Lodz, Poland
autor Klich, M.
  • Lodz University of Technology, Institute of Materials Science and Engineering, 1/15 Stefanowskiego Str., 90-924 Lodz, Poland
Bibliografia
[1] A. Zaki, U. Anwar, Corr. Sci. 43, 1227-1243 (2001).
[2] S. Costa, H. Puga, J. Barbosa, A.M.P. Pinto, Mat. Sci. and Design. 42, 347-352 (2012).
[3] Z. Jia, J. Røyset, J. K. Solberg, Q. Liu, Trans. Nonferrous Met. Soc. China 22, 1866-1871 (2012).
[4] Y. Kun, L. Wenxian, L. Songrui, Z. Jun, Mat. Sci. and Eng. A. 368, 88-93 (2004)
[5] B. Fuller Christian, Submitted To The Graduate School In Partial Fulfillment Of The Requirements, Evanston, Illinois 2003.
[6] S. A. Meguid, G. Shagal, J.C. Stranart, J. Daly, Finite Elements in Analysis and Design. 31, 179-191 (1999).
[7] J. Li, Z. Peng, C. Li, W. Chen, Z. Zheng, Trans. Nonferrous Met. Soc. China 18, 755-762 (2008).
[8] CN 103480789 - Pressure-torsion forming method of high- -strength aluminium-alloy disc-shaped workpiece 2013.
[9] CN 102189706- High-pressure shearing deformation method and device for tubular materials 2011.
[10] S. M. H-Gangaraj, Y. Alvandi-Tabrizi, G. H. Farrahi, G. H. Majzoobi, H. Ghadbeigi, Trib. Inter. 44, 1583 1588 (2011).
[11] M. Benedetti, V. Fontanari, P. Scardi, C. L. A. Ricardo, M. Bandini, International Journal of Fatigue. 31, 1225-1236 (2009).
[12] C. A. Rodopoulos, S. A. Curtis, E. R. de los Rios, J. Solis Romero. International Journal of Fatigue. 26, 849-856 (2004).
[13] S. Curtis, E. R. de los Rios, C. A. Rodopoulos, A. Levers, International Journal of Fatigue. 25, 59-66 (2003).
[14] W. Jianming, L. Feihong, Y. Feng, Z. Gang, The International Journal of Advanced Manufacturing Technology 56, 571-578 (2011).
[15] S. A. Meguid, G. Shagal, J. C. Stranart, International Jurnal of Impact Engineering 27, 119-134 (2002).
[16] R. Vafaei, M. R. Toroghinejad, R. Pippan. Materials Science and Engineering A. 536, 73-81 (2012).
[17] T. Sakai, A. Belyakov, R. Kaibyshev, H. Miura, J. J. Jonas, Prog. Mater. Sci. 60, 130-207 (2014).
Uwagi
EN This work was supported by the Polish State Committee for Scientific Research under project no. 2012/07/N/ST8/03099.
PL Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-b15b7e48-3770-43e6-85b9-cb15c1173bc4
Identyfikatory
DOI 10.1515/amm-2016-0190