Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-b0ae8f14-7965-4e52-a1cf-804a78a99a5f

Czasopismo

Archives of Metallurgy and Materials

Tytuł artykułu

Fabrication of Multilayer Cu/Ni Systems with Nanometric Layers by Electrolysis Method

Autorzy Spilka, M.  Babilas, R.  Ratuszek, W.  Kowalska, J.  Matus, K. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
Abstrakty
EN The paper presents research results of multilayer systems composed of alternate Cu/Ni layers. The layers thickness obtained by the galvanic treatment was determined by using the transmission electron microscopy and X-ray diffraction method in the grazing incidence diffraction geometry. The surface morphology was observed using scanning electron microscope with EDS microanalysis. Observation of the surface topography of systems using the atomic force microscope was also carried out.
Słowa kluczowe
EN Cu/Ni multilayer systems   galvanic method   thickness measurement   surface morphology   topography  
Wydawca Polish Academy of Sciences, Committee of Metallurgy, Institute of Metallurgy and Materials Science
Czasopismo Archives of Metallurgy and Materials
Rocznik 2018
Tom Vol. 63, iss. 4
Strony 2067--2073
Opis fizyczny Bibliogr. 16 poz., fot., rys., tab., wzory
Twórcy
autor Spilka, M.
  • Silesian University of Technology, Faculty of Mechanical Engineering, Institute of Engineering Materials and Biomaterials, 18a Konarskiego Str., 44-100 Gliwice, Poland, monika.spilka@polsl.pl
autor Babilas, R.
  • Silesian University of Technology, Faculty of Mechanical Engineering, Institute of Engineering Materials and Biomaterials, 18a Konarskiego Str., 44-100 Gliwice, Poland
autor Ratuszek, W.
  • AGH University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Science, Department of Physical and Powder Metallurgy, Al. Mickiewicza 30, 30-059 Kraków, Poland
autor Kowalska, J.
  • AGH University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Science, Department of Physical and Powder Metallurgy, Al. Mickiewicza 30, 30-059 Kraków, Poland
autor Matus, K.
  • Silesian University of Technology, Faculty of Mechanical Engineering, Institute of Engineering Materials and Biomaterials, 18a Konarskiego Str., 44-100 Gliwice, Poland
Bibliografia
[1] A. Zawadzka, Cienkie warstwy i nanostruktury cienkowarstwowe - eksperymentalne metody wytwarzania i badania własności, Wydawnictwo Naukowe Uniwersytetu Mikołaja Kopernika, Toruń (2016) (in Polish).
[2] H. Kuru, H. Kockar, M. Alper, J. Magn. Magn. Mater. 444, 132-139 (2017), DOI:10.1016/j.jmmm.2017.08.019.
[3] A. Tekgül, M. Alper, H. Kockar, M. Haciismailoglu, J. Mater. Sci.: Mater. Electron. 26, 2411-2417 (2015), DOI: 10.1007/s10854-015-2699-7.
[4] L. Péter, K. Vad, A. Csik, R. Muñíz, L. Lobo, R. Pereiro, S. Šturm, K. Žužek Rožman, G. Molnár, K. Németh, K. Neuróhr, K. Boros, L. Pogány, I. Bakonyi, J. Electrochem. Sci. Eng. 8 (1), 49-71 (2018), DOI: http://dx.doi.org/10.5599/jese.480.
[5] M. Spilka, A. Kania, R. Nowosielski, A. Maciej, Metalurgija 56 (3-4), 389-392 (2017).
[6] M. Gągorowska, M. Duś-Sitek, Arch. Metall. Mater. 53 (3), 909-917 (2008).
[7] Q. Zhou, J.Y. Xie, F. Wang, P. Huang, K.W. Xu, T.J. Lu, Acta Mech. Sin. 31 (3), 319-337 (2015), DOI:10.1007/s10409-015-0401-1.
[8] S. Esmaili, Inter. Res. J. App. Basic Sci. 9 (11), 1937-1940 (2015).
[9] E. Łągiewka, A. Budniok, Struktura, właściwości i metody badań materiałów otrzymanych elektrolitycznie, Wydawnictwo Uniwersytetu Śląskiego, Katowice (2010) (in Polish).
[10] E. Wilhelms, F. Dehchar, R. Jordberg, M. Kjellberg, J. Stjärnesund, P. Söderbäck, Electrochemical deposition of multi- and single layer coatings, Uppsala Universitet, Sweden (2015).
[11] S. J. Skrzypek, M. Witkowska, J. Kowalska, K. Chruściel, Solid State Phenom. 163, 9-12 (2010), DOI:10.4028/www.scientific.net/SSP.163.9.
[12] S. J. Skrzypek, M. Goły, J. Kowalska, K. Chruściel, Hutnik – Wiadomości Hutnicze 79 (4), 238-246 (2012) (in Polish).
[13] Q. Yang, L. R. Zhao, Mater. Charact. 59, 1285-1291 (2008).
[14] B. Kucharska, E. Kulej, Arch. Metall. Mater. 55 (1), 45-51 (2010).
[15] H. C. Barshilia, K. S. Rajam, Surf. Coat. Tech. 155, 195-202 (2002).
[16] B. Kucharska, E. Kulej, M. Gwoździk, Arch. Metall. Mater. 57 (3), 671-677 (2012), DOI:10.2478/v10172-012-0072-x.
Uwagi
EN This publication was financed by the Ministry of Science and Higher Education of Poland as the statutory financial grant of the Faculty of Mechanical Engineering SUT.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-b0ae8f14-7965-4e52-a1cf-804a78a99a5f
Identyfikatory
DOI 10.24425/amm.2018.125144