Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-article-PWA6-0013-0005

Czasopismo

Prace Naukowe Politechniki Warszawskiej. Mechanika

Tytuł artykułu

Calculation for Reaction Unburned Component in CO(2) Recovering Semi-closed Gas Turbine System

Autorzy Ebara, T.  Iki, N.  Takahashi, S. 
Treść / Zawartość
Warianty tytułu
Konferencja Problemy Badawcze Energetyki Cieplnej (6; Konferencja; 2003; Warszawa, Polska)
Języki publikacji EN
Abstrakty
EN The aim of this research was to propose optimal operation conditions and system configuration for C02 Recovering Semi-closed Gas Thrbine System with CH4-02 firing. To reduce the C02 emission and protect the environment, it is needed to develop a clean and high-efficiency power generation system. Although higher turbine inlet temperature (TIT) derives higher system efficiency, it causes higher NOx emission in open gas turbine systems. The semi-closed gas turbine system with steam recirculation has been noted because of its high efficiency (ni)>60%, HHV ) without any NOx emission. There are many technical challenges in the realization of this system, such as materials and combustion control. We try to clarify the relationship between the emission properties from system (e.g., concentration of CO which is a regulated poison) and the geometry of gas path in a high temperature turbine. The calculation results clarify that the CO concentration is low, but strongly effected by the turbine geometry at a lean combustion surroundings, which is the realistic operating condition. And the necessity of wide and suitable length duct for lower CO emission is also clarified.
Słowa kluczowe
PL turbiny gazowe   badania naukowe  
EN gas turbine cycle   scientific research  
Wydawca Oficyna Wydawnicza Politechniki Warszawskiej
Czasopismo Prace Naukowe Politechniki Warszawskiej. Mechanika
Rocznik 2003
Tom z. 202
Strony 45--51
Opis fizyczny Bibliogr. 7 poz., wykr., tab.
Twórcy
autor Ebara, T.
autor Iki, N.
autor Takahashi, S.
  • National Institute of Advanced Industrial Science and Technology Japan
Bibliografia
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-article-PWA6-0013-0005
Identyfikatory