Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-article-BWAN-0002-0051

Czasopismo

Journal of Achievements in Materials and Manufacturing Engineering

Tytuł artykułu

Microstructure and mechanical properties of the Al-Ti alloy with calcium addition

Autorzy Dobrzański, L. A.  Labisz, K.  Olsen, A. 
Treść / Zawartość http://www.journalamme.org
Warianty tytułu
Języki publikacji EN
Abstrakty
EN Purpose: In this paper there are presented the investigation results of mechanical properties and microstructure with intermetallic phases of the aluminium-titanium alloy with a defined content of Ca addition. The purpose of this work was also to determine the heat treatment conditions for solution heat treatment of the investigation alloys. Design/methodology/approach: The reason of this work was to determine the heat treatment influence, particularly solution heat treatment time to the changes of the microstructure, as well to determine which intermetallic phases occur after the heat treatment performed, and how is the morphology of these particles. Findings: After solution heat treatment for 4 hours the structure changes in a way, that the grains are larger and no more uniform as showed before. The most stable intermetallic in the Al-Ti system is the Al3Ti phase. The solution heat treatment time should be greater than 4 hours to ensure a proper solution of titanium and calcium in the Al-α solid solution. Research limitations/implications: The investigated aluminium samples were examined metallographically using optical microscope with different image techniques, SEM, TEM and analyzed using a Vickers micro-hardness tester, also EDS microanalysis was made. Practical implications: As an implication for the practice a new alloy can be developed, some other investigation should be performed in the future, but the knowledge found in this research shows an interesting investigation direction. Originality/value: The combination of light weight and high strength Ti-based alloys is very attractive for aerospace and automotive industries. Furthermore, the presence of calcium can bring into existence new unknown phases as well can enhance the thermal stability of ternary Al-Ti-Ca alloy because of its higher melting point then Al-Ti.
Słowa kluczowe
PL odlewanie   obróbka cieplna   stopy aluminium   wapno  
EN casting   heat treatment   aluminium alloys   calcium  
Wydawca International OCSCO World Press
Czasopismo Journal of Achievements in Materials and Manufacturing Engineering
Rocznik 2008
Tom Vol. 26, nr 2
Strony 183--186
Opis fizyczny Bibliogr. 16 poz., tab., wykr.
Twórcy
autor Dobrzański, L. A.
autor Labisz, K.
autor Olsen, A.
  • Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland, leszek.dobrzanski@polsl.pl
Bibliografia
[1] M. Beschliesser, H. Clemens, H. Kestler, F. Jeglitsch, Phase stability of a c-TiAl based alloy upon annealing: comparison between experiment and thermodynamic calculations, Scripta Materialia 49 (2003) 279-284.
[2] S. Banumathy, P. Ghosal, A. K. Singh, On the structure of the Ti3Al phase in Ti-Al and Ti-Al-Nb alloys, Journal of Alloys and Compounds 394 (2005) 181-185.
[3] M. Goral, G. Moskal, L. Swadźba, Gas phase aluminising of TiAl intermetallics, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 443-446.
[4] S. Lartigue-Korinek, C. Legros, C. Carry, F. Herbst, Titanium effect on phase transformation and sintering behaviour of transition alumina, Journal of the European Ceramic Society 26 (2006) 2219-2230.
[5] J. Szajnar, T. Wróbel, Inoculation of primary structure of pure aluminium, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 283-286.
[6] P. L. Schaffer, A. K. Dahle, Settling behaviour of different grain refiners in aluminium, Materials Science and Engineering 413–414 (2005) 373-378.
[7] Y. Han, D. Shu, J. Wang, B. Sun, Microstructure and grain refining performance of Al-5Ti-1B masteralloy prepared under high-intensity ultrasound, Materials Science and Engineering A430 (2006) 326-331.
[8] L. A. Dobrzański, K. Labisz, R. Maniara, Microstructure investigation and hardness measurement in Al-Ti alloy, Proceedings of the 13th Scientific International Conference „Achievements in Mechanical and Materials Engineering” AMME'2005, Gliwice-Wisła, 2005, 161-166.
[9] X. Wang, A. Jha, R. Brydson, In situ fabrication of Al3Ti particle reinforced aluminium alloy metal-matrix composites, Materials Science and Engineering A364 (2004) 339-345.
[10] V. Maurice, G. Despert, S. Zanna, P. Josso, M.-P. Bacos, P. Marcus, XPS study of the initial stages of oxidation of a2-Ti3Al and c-TiAl intermetallic alloys, Acta Matrialia 55 (2007) 3315-3325.
[11] G. Mrówka-Nowotnik, J. Sieniawski, M. Wierzbińska, Analysis of intermetallic particles In AlSi1MgMn aluminium alloy, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 155-158.
[12] G. Mrówka-Nowotnik, J. Sieniawski, M. Wirzbińska, Intermetallic phase particles in 6082 aluminium alloy, Archives of Materials Science and Engineering 28/1 (2007) 69-76.
[13] L. A. Dobrzański, K. Labisz, A. Olsen, P. Zgierski, Precipitation processes during heat treatment of the Al-Mg-Cu-Zn alloy for car chassis, Proceedings of the 10th Scientific International Conference „Achievements in Mechanical and Materials Engineering” AMME'2001, Gliwice-Zakopane, 2001, 645-650 (in Polish).
[14] P. Švancárek, D. Galusek, F. Loughran, A. Brown, R. Brydson, A. Atkinson, F. Riley, Microstructure-stress relationships in liquid-phase sintered alumina modified by the addition of 5 wt.% of calcia-silica additives, Acta Materialia 54 (2006) 4853-4863.
[15] L. F. Mondolfo, Aluminium Alloys structure and Properties, Butterwortha, London, 1976.
[16] T. Lipiński, Improvement of mechanical properties of AlSi7Mg alloy with fast cooling homogenous modifier, Archives of Foundry Engineering 8 (2008) 85-88.100.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-article-BWAN-0002-0051
Identyfikatory