Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-article-BWA0-0026-0050

Czasopismo

Machine Dynamics Problems

Tytuł artykułu

Some Remarks on the Ball Screw Rigidity

Autorzy Sobolewski, J. Z. 
Treść / Zawartość
Warianty tytułu
Konferencja International Conference Computer Simulation in Machine Design - COSIM 2006 (11 ; 2006 ; Krynica Zdrój, Poland)
Języki publikacji EN
Abstrakty
EN Rigidity is the main criterion for manufacturing quality of ball screws. One of rigidity components is the balls/balltrack area rigidity, dependent on Hertz' deflections. However, due to machining errors, the ball screws rigidity are considerably lower than the theoretical ones. On the basis of a mathematical model a computer simulation of the influence of machining errors on contact deflections was carried out. It proved that the rigidity of balls/balltrack area depends not only on accuracy grade but also on geometrical parameters of the thread. Measurements of ball screws rigidity were executed and the results were compared with the results of computers simulation. This effected a verification of computational model and a determination of the confidence level of calculations. A coefficient known as the geometry correction factor was introduced in order to estimate the influence of machining errors on lowering the level of nut unit rigidity. This coefficient was compared to the correction factor of accuracy applied in ISO standard for estimating ball screws rigidity.
Słowa kluczowe
PL sztywność   przekładnia śrubowa kulkowa  
EN rigidity   ball screw  
Wydawca Oficyna Wydawnicza Politechniki Warszawskiej
Czasopismo Machine Dynamics Problems
Rocznik 2006
Tom Vol. 30, No. 4
Strony 122--130
Opis fizyczny Bibliogr. 5 poz., rys.
Twórcy
autor Sobolewski, J. Z.
Bibliografia
ISO/DIS 3408-4: 2005, Ball screws - Part 4: Static axial rigidity.
Levit, G. A., Borisenko, G. A., 1964, Calculation and designing of the ball screws (in Russian), Moscow.
Małkiński, J., 2006, Manufacturing Quality of Ball Screws Estimation (in Polish), PhD thesis, Oficyna Wydawnicza Politechniki Warszawskiej, Warszawa.
Sobolewski, J. Z., 1995, Determination of preload in kinematic ball screw pair, Arch. Bud. Masz. z. 1-2, vol. XLII, Warszawa, 5-17.
Sobolewski, J. Z., 2000, Ball screws design (in Polish), Oficyna Wydawnicza Politechniki Warszawskiej, Prace naukowe Mechanika, Nr 182, Warszawa.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-article-BWA0-0026-0050
Identyfikatory