Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-article-BUJ5-0019-0013

Czasopismo

Journal of KONES

Tytuł artykułu

Instantaneous piston speed measurement for marine diesel engine combustion monitoring

Autorzy Kowalak, P.  Borkowski, T. 
Treść / Zawartość http://www.kones.eu/
Warianty tytułu
Języki publikacji EN
Abstrakty
EN It is important that marine diesel engines run in their normal condition in order to maintain correct efficiency, low pollution and high reliability. The record of in-cylinder pressure pattern and its evaluation is one of the most powerful sources for experimental based analysis of internal combustion engines. In addition, collected data and calculated values expand the engine diagnostic system capabilities. From the other hand reliable calculation of mean indicated pressure and other performance data requires accurate measurement of cylinder pressures and detection of the crankshaft position. It is necessary to ensure correct synchronization of recorded pressure shape with crankshaft position. For this purpose magnetic pick-up to measure the rotational speed from flywheel is usually used as a source of sampling pulses. The instantaneous piston speed can be investigated using the linear movement sensor located inside the crankshaft box. For this purpose marine propulsion testing engine was equipped with optic fiber sensor to perform permanent piston position measurement. Test bed with examined engine is equipped additionally with: optoelectronic in-cylinder pressure transducer, magnetic pick-up to measure rotational speed from flywheel, optic fiber sensor to measure the rotational speed and angular increments from propeller shaft and strain gauge arrangement designed to provide effective torque measurement.
Słowa kluczowe
EN sea transport   internal combustion engines   marine diesel engine   engine maintenance  
Wydawca Institute of Aviation
Czasopismo Journal of KONES
Rocznik 2006
Tom Vol. 13, No. 2
Strony 215--223
Opis fizyczny Bibliogr. 7 poz., rys.
Twórcy
autor Kowalak, P.
autor Borkowski, T.
  • Maritime University of Szczecin, Engineering Department 1-2 Waly Chrobrego, 70-500 Szczecin, Poland, tel. +48-91 480 9400, fax: +48 91 480 9575, pkowalak@am.szczecin.pl
Bibliografia
[1] Borkowski T., Listewnik J., [CD-ROM], Cylinder pressure data analysis to estimate Nox emission on large bore slow speed marine engines. International Council on Combustion Engines CIMAC Congress 2004, Paper No. 231, p. 15, Kyoto (Japan) 2004.
[2] Wang Y., and Lim T., C., An analysis of modal damping sources in reciprocating engine, Journal of Sound and Vibration, 242(1), pp 179-193, 2001.
[3] Nilsson M., Modeling flywheel-speed variations based on cylinder pressure, Master’s thesis, Linköping Univeristy, nr: LiTH-ISY-EX-3584-2004, 2004.
[4] Traver M. L., Atkinson R. J., Atkinson C. M., Neural network-based diesel engine emissions prediction using in-cylinder combustion pressure, SAE, 1532, 01, 1999.
[5] Twiddle J., A., Jones. N. B., A high-level technique for diesel engine combustion system condition monitoring and fault diagnosis, Proc. Instn Mech. Engrs., Vol 216 Part I: J Systems and Control Engineering, pp 125-130, IMechE 2002.
[6] Haller C., O’Connell M., Advances in diesel engine signature analysis – recent experience with techniques for medium and slow-speed diesel engine, Congress CIMAC, Hamburg 2001,
[7] Tsuchiya K., Nagashima k., A., A calculation method for indicated mean effective pressure based on harmonic analysis of pressure waveform, Int. J. Engine Res. Vol. 4 No 2, ImechE 2003.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-article-BUJ5-0019-0013
Identyfikatory