PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

A novel method for vibration surveillance during high speed ball end milling of flexible details

Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The paper is devoted to vibration surveillance of unsteady systems, which are idealized by the finite element method. Ball end milling of flexible details is observed very frequently in case of modern machining centres. Tool-workpiece relative vibration may lead to a loss of stability and cause a generation of self-excited chatter vibration. The paper proposes the method of minimizing vibration level, based on matching the spindle speed to the optimal phase shift. As result of a milling process modeling, we get a hybrid system in which are separated: - Modal subsystem. It is a stationary model of one-side-supported flexible detail. - Structural subsystem, i.e. non-stationary discrete model of ball end mill and cutting process. - Connective subsystem as conventional contact point between tool and workpiece. The method has been developed with success. Modal model of the workpiece allowed us to determine an optimal spindle speed. Modal assurance criterion (MAC) has been assessed and confirmed good agreement between experimental and theoretical modal model. Results of computer simulation, as well as - of experimental investigation on the Mikron VCP 600 milling machine mean to be in support. Hence amplitude values for chosen optimal spindle speed became relatively smaller than for the other ones.
Rocznik
Strony
271--282
Opis fizyczny
Bibliogr. 7 poz., rys., tab.
Twórcy
  • Faculty of Mechanical Engineering, Gdansk University of Technology, Gdansk, Poland, kkalinsk@o2.pl
Bibliografia
  • [1] J. TOMKOW: Vibrostability of machine tools. Warsaw, The Scientific and Technical Publication, 1997.
  • [2] K. J. KALIŃSKI: Vibration surveillance of mechanical systems which are idealised discretely. Gdansk, The Publication of Gdansk University of Technology, 2001.
  • [3] K. J. KALIŃSKI, T. KUCHARSKI and S. SAWIAK: A new method for suppression of chatter vibration by programmed spindle speed control. 3rd Mt. Conf on Metal Cutting and High Speed Machining, Metz, France, I (2001), 241-250.
  • [4] K. J. KALIŃSKI: The spindle speed optimal control as a mean of chatter vibration surveillance. Int. Mech. Prod. Systems Eng, Metz, ENIM, (2003), 30-40.
  • [5] K. J. KALIŃSKI and M. GALEWSKI: Vibration surveillance during machining processes with a use of the spindle speed linear-optimal control. Theory of Machines and Mechanisms (Ed. J. Wojnarowski and T. Uhl), Krakow, Chair of Robotics and Machine Dynamics AGH, 2 (2004), 71-76.
  • [6] Y. S. LIAO and Y. C. YOUNG: A new on-line spindle speed regulation strategy for chatter control. Int. J. Mach. Tools Mannikt, 36(5), (1996), 651-660.
  • [7] K. J. KALIŃSKI and M. CHODNICKI: Vibration surveillance by the hybrid system’s optimal control on example of a cuttin g process. Theory of Machines and Mechanisms (Ed. J. Wojnarowski and T. Uhl), Krakow, Chair of Robotics and Machine Dynamics AGH, 2 (2004), 197-202.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BSW3-0042-0003
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.