Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button


Metrology and Measurement Systems

Tytuł artykułu

Investigation on accelerated impedance spectrum measurement method with multisine signal stimulation

Autorzy Niedostatkiewicz, M.  Zielonko, R. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
EN The paper presents an investigation on the accelerated impedance spectrum measurement method, oriented at parameter identification of technical objects modelled by a linear equivalent circuit, e.g. anticorrosion coatings. The method is based on multisine signal stimulation of an object and response analysis by triangle window filter-banks. It has several advantages, as compared with conventional point-by-point spectrum measurement. The method was implemented in an experimental measurement system based on a DAQ card. The achieved experimental results are discussed and compared with simulation results, in terms of measurement time reduction and accuracy.
Słowa kluczowe
EN impedance spectroscopy   multisine measurement signals   anticorrosion coatings diagnosis  
Wydawca Komitet Metrologii i Aparatury Naukowej PAN
Czasopismo Metrology and Measurement Systems
Rocznik 2009
Tom Vol. 16, nr 4
Strony 619--630
Opis fizyczny Bibliogr. 11 poz., rys., tab., wykr.
autor Niedostatkiewicz, M.
autor Zielonko, R.
  • Gdansk University of Technology, Faculty of Electronics, Telecommunication and Informatics, Department of Optoelectronics and Electronic Systems, G. Narutowicza 11/12, 80-233 Gdańsk, Poland,
[1] P.L. Bonora, F. Deflorian, L. Federizzi: “Electrochemical Impedance Spectroscopy as a tool for investigating underpaint corrosion”. III International Symposium on Electrochemical Impedance Spectroscopy, Nieuwpoort, Belgium, 1995.
[2] B.W. Licznerski, K. Nitsch: “Impedance Spectroscopy in the investigation of electronic materials”. USA/Poland Microelectronics Symposium, Wroclaw, Poland, 1995.
[3] L.J. Golonka, B.W. Licznerski, K. Nitsch, H. Teterycz: “Thick-film humidity sensors”. 18th International Spring Seminar on Electronic Technology, ISSE, Czech Republic, 1995.
[4] S. Hong, R.S. Harichandran: “Sensors to monitor CFRP/Concrete Bond in Beams Using electrochemical Spectroscopy”. J. Compos. For Constr., vol. 9, 2005.
[5] R. Bragos, R. Blanco-Enrich, O. Casas, J. Rosell: “Characterisation of dynamic Biologic Systems Using Multisine Based Impedance Spectroscopy”. IEEE IMTC Conference, Budapest, Hungary, 2001.
[6] B.A. Boukamp: “Non-linear Least Square Fit for analysis of immitance data of electrochemical systems”. Solid State Ionics, vol. 20, 1986.
[7] J. Hoja, G.Lentka: “Analyzer for spectroscopy of low-impedance objects”. Metrol. Meas. Syst., vol. XVI, no. 1, 2009, pp. 19- 31.
[8] D. Smith: “The acquisition of Electrochemical Response Spectra by On-Line Fast Fourier Transform”. Analytical Chemistry, vol. 48, 1976.
[9] R. Zielonko, M. Niedostatkiewicz: “Accelerated multisine impedance method directed at diagnosis of anticorrosion coatings”. XVIII IMEKO World Congress, Brazil, 2006.
[10] J. McClellan, R. Schafer, M. Yoder: DSP First a Multimedia Approach, Prentice-Hall, 1996.
[11] R. Guyla, J. Shoukens, Laszlo: “An Efficient Nonlinear Least Square Fitting Algorithm”. IEEE Trans. on Instrumentation and Measurement, vol. 51, no. 4, 2002, pp. 1196-1201.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-article-BSW1-0062-0008