Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-article-BSW1-0062-0003

Czasopismo

Metrology and Measurement Systems

Tytuł artykułu

Capacitive sensing in process instrumentation

Autorzy Fuchs, A.  Zangl, H.  Moser, M. J.  Bretterklieber, T. 
Treść / Zawartość http://www.metrology.pg.gda.pl/archives.html http://journals.pan.pl/dlibra/journal/99851
Warianty tytułu
Języki publikacji EN
Abstrakty
EN This paper addresses the use of capacitive measurement principles for process instrumentation. A brief review on capacitance-based sensors to measure industrial process parameters is provided. A capacitance-to-digital conversion system developed at the Sensors Group at our Institute is presented. Applications of capacitance-based process instrumentation for moisture sensing, flow velocity determination, fill level measurement and proximity sensing are discussed in detail.
Słowa kluczowe
EN capacitive sensing   process instrumentation   moisture   flow velocity   fill level   proximity  
Wydawca Komitet Metrologii i Aparatury Naukowej PAN
Czasopismo Metrology and Measurement Systems
Rocznik 2009
Tom Vol. 16, nr 4
Strony 557--568
Opis fizyczny Bibliogr. 33 poz., rys., tab., wykr.
Twórcy
autor Fuchs, A.
autor Zangl, H.
autor Moser, M. J.
autor Bretterklieber, T.
  • Technische Universität Graz, Fakultät für Elektrotechnik und Informationstechnik, Institut für Elektrizitätswirtschaft und Energieinnovation, Kopernikusgasse 24, A-8010 Graz, Austria, anton.fuchs@tugraz.at
Bibliografia
[1] J. Lucas, S. Hole, C. Batis: “Analytical Capacitive Sensor Sensitivity Distribution and Application”. Measurement Science and Technology, vol. 17, 2006, pp. 2467-2478.
[2] G. Brasseur, B. Brandstätter, H. Zangl: “State of the Art of Robust Capacitive Sensors”. Proc. of the International Workshop on Robot Sensing ROSE 2003, Orebro, Sweden, 2003, pp.4-8.
[3] G. Brasseur: “Design Rules for Robust Capacitive Sensors”. IEEE Transactions on Instrumentation and Measurement, vol. 52, no. 4, 2003, pp. 1261-1265.
[4] L. Baxter: Capacitive Sensors Design and Applications. IEEE Press, New York, 1997.
[5] W. Ko, Q. Wang: “Touch Mode Capacitive Pressure Sensors for Industrial Applications”. Proc. of the 10th Annual IEEE International Workshop on Micro Electro Mechanical Systems, Nagoya, Japan, 1997, pp. 284-289.
[6] C. Chiang, Y. Huang: “A Semicylindrical Capacitive Sensor With Interface Circuit Used for Flow Rate Measurement”. IEEE Sensors Journal, vol. 6, no. 6, 2006, pp. 1564-1570.
[7] R. Oosterbroek, T. Lammerink, J. Berenschot, A. van den Berg, M. Elwenspoek: “Design, Realization and Characterization of a Novel Capacitive Pressure/Flow Sensor”. Proc. of the International Conference on Solid-State Sensors and Actuators, Chicago, USA, 1997, pp. 151-154.
[8] A. Wung, R. Park, K. Rebello, G. Fedder: “Micro Tri-Axial High-G CMOSMEMS Capacitive Accelerometer Array”. Proc. of the 21st IEEE International Conference on Electro Mechanical Systems, Tucson, USA, 2008, pp. 876-879.
[9] H. Ahn: “A Cylindrical Capacitive Sensor (CCS) for Both Radial and Axial Motion Measurements”. Measurement Science and Technology, vol. 17, 2006, pp. 2027-2034.
[10] Z. Chen, R. Luo: “Design and Implementation of a Capacitive Proximity Sensor Using Microelectromechanical Systems Technology”. IEEE Transactions on Industrial Electronics, vol. 45, no. 6, 1998, pp. 886-894.
[11] C. Babu, D. Somesh: “Design of Self-Compensated Non Contact Capacitive Sensors and Proficient Signal Conditioning Circuit for Multi Threshold Liquid Level Control - A Novel Approach”. Proc. of the IEEE International Conference on Industrial Technology, Mumbai, India, 2006, pp. 1931-1936.
[12] N. Thong-un, W. Sriratana, L. Tanachaikhan: “Design of Capacitive Sensor for Concentration Measurement”. Proc. SICE-ICASE International Joint Conference, Xexco, Korea, 2006, pp. 1959-1962.
[13] O. Korostynska, K. Arshak, E. Grill, A. Arshak, K. Kaneswaran: “Bi2O3/Nb2O5 Thick Film Capacitive pH Sensor Using AD5933 Impedance Converter”. Proc. IEEE Sensors Applications Symposium, Atlanta, USA, 2008, pp. 16-21.
[14] D. Preethichandra, K. Shida: “A Simple Interface Circuit to Measure Very Small Capacitance Changes in Capacitive Sensors”. IEEE Transactions on Instrumentation and Measurement, vol. 50, no. 6, 2001, pp. 1583-1586.
[15] S. Ranganathan, M. Inerfield, S. Roy, S. Garverick: “Sub-Femtofarad Capacitive Sensing for Microfabricated Transducers using Correlated Double Sampling and Delta Modulation”. IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, vol. 47, no. 11, 2000, pp. 1170-1176.
[16] H. Zangl: Design Paradigms for Robust Capacitive Sensors. Dissertation, Graz University of Technology, Austria, 2005.
[17] D. Hrach, H. Zangl, A. Fuchs, T. Bretterklieber: “A Versatile Prototyping System for Capacitive Sensing”. Sensors and Transducers Journal, vol. 90, 2008, pp. 117-127.
[18] T. Bretterklieber, H. Zangl, M. Motz, T. Werth, D. Hammerschmidt: “Versatile Sensor Front End for Low-Depth Modulation Capacitive Sensors”. Proc. of the IEEE International Instrumentation and Measurement Technology Conference, Vancouver Island, Canada, 2008, pp. 830-835.
[19] T. Bretterklieber, H. Zangl, D. Hrach, G. Holler, D. Hammerschmidt, M. Motz: “Versatile Programmable Integrated Interface for Robust Capacitive Sensors”. Elektrotechnik und Informationstechnik, vol. 125, no. 4, 2008, pp. 123-128.
[20] H. Zangl, T. Bretterklieber, G. Holler: “On the Design of a Fully Differential Capacitive Sensor Front-End Interface Circuit”. Proc. of Microelectronics Conference ME2008, Vienna, Austria, 2008, pp. 132-136.
[21] A. Fuchs, H. Zangl, G. Holler, G. Brasseur: “Design and Analysis of a Capacitive Moisture Sensor for Municipal Solid Waste”. Measurement Science and Technology, vol. 19, 2008.
[22] K. Sundara-Rajan, L. Byrd, A. Mamishev: “Moisture Content Estimation in Paper Pulp using Fringing Field Impedance Spectroscopy”. IEEE Sensors Journal, vol. 4, no. 3, 2004, pp. 378-383.
[23] D. Hazarika, S. Laskar, A. Sarma, P. Sarmah: “PC-Based Instrumentation System for the Detection of Moisture Content of Tea Leaves at Its Final Stage”. IEEE Transactions on Instrumentation and Measurement, vol. 55, no. 5, 2006, pp. 1641-1647.
[24] R. McIntosh, M. Casada: “Fringing Field Capacitance Sensor for Measuring the Moisture Content of Agricultural Commodities”. IEEE Sensors Journal, vol. 8, no. 3, 2008, pp. 240-247.
[25] A. Fuchs, M. Moser, H. Zangl: “Investigation on the Dependency of the Electrical Capacitance on the Moisture Content of Wood Pellets”. Proc. 3rd International Conference on Sensing Technology, 2008, Tainan, Taiwan, pp. 661-665.
[26] D.W. Spitzer (Editor): Flow Measurement - Practical Guides for Measurement and Control. Instrument Society of America, 1991.
[27] A. Fuchs: Flow Parameter Determination of Powdery and Granular Material in Pneumatic Conveying Processes. Dissertation, Graz University of Technology, 2006.
[28] A. Fuchs, H. Zangl , P. Wypych: “Signal Modelling and Algorithms for Parameter Estimation in Pneumatic Conveying”. Powder Technology, vol. 173, nr. 2, 2007, pp. 129-139.
[29] O. Fiedler, J. Werther, N. Labahn, J. Kumpart, K. Christofori: “Measurement of Local Particle Velocities and Velocity Distributions in Gas-Solid Flows by Means of the Spatial Filter Method”. Powder Technology, vol. 94, 1997, pp. 51-57.
[30] H. Zangl, A. Fuchs, T. Bretterklieber: “Non-Invasive Measurement of Fluids by Means of Capacitive Sensing”. e&i Elektrotechnik und Informationstechnik, vol. 1-2, 2009, pp. 8-12.
[31] T. Bretterklieber: On the Design of a Robust Liquid Based Capacitive Inclination Sensor. Dissertation, Graz University of Technology, Austria, 2008.
[32] B. George, H. Zangl, T. Bretterklieber, G. Brasseur: “Seat Occupancy Detection System Based on Capacitive Sensing”. IEEE Transactions on Instrumentation and Measurement, vol. 58, no. 5, 2009, pp.1487-1494.
[33] W.L. James: “Dielectric Properties of Wood and Hardboard: Variations with Temperature, Frequency, Moisture Content and Grain Orientation”. USDA Forest Service Research Paper, FPL 245, 1975.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-article-BSW1-0062-0003
Identyfikatory