Applicability of a hereditary integral wear model with exponential Kernel memory function in a friction connection of elastic shields of a friction clutch

• Autorzy: Awrejcewicz J. , Grzelczyk D.
• Języki publikacji: EN

Abstrakty

EN

Modeling and numerical investigations of contact phenomena occurring on the contact surface of flat shields of a friction clutch are discussed in this work. Contact problems taking into account wear processes in many friction connections have already been studied earlier, however, simplified mathematical models have been used and applied. Unlike many previous works, we take into account elasticity and wear properties of the material of shields being in friction contact. Moreover, a hereditary integral wear model with an exponential memory function is considered. Equations modeling contact pressure on the contact surface of shields are derived and they yield contact pressure and wear of the shields. Numerical analysis is carried out with the qualitative and quantitative theories of integral equations. Many interesting results are obtained, illustrated and discussed.

Słowa kluczowe

EN

clutch; friction; wear

PL

sprzęgło; zużycie

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2010
• Tom: Vol. 15, no. 3
• Strony: 609--617
• Opis fizyczny: Bibliogr. 17 poz., rys., wykr.

Twórcy

autor

Awrejcewicz J.

autor

Grzelczyk D.

• Department of Automation and Biomechanics Stefanowski 1/15 Str., 90-924 Lodz, POLAND,

Bibliografia

• Archard J.F. (1953): Contact and rubbing of flat surfaces. – J. Applied Physics, vol.24, No.8, pp.981-988.
• Awrejcewicz J. and Pyryev Yu. (2009): Nonsmooth dynamics of contacting thermoelastic bodies. – New York: Springer-Verlag.
• Chichinadze A.V., Braun E.D., Ginsburg A.G. and Ignat’eva Z.V. (1979): Calculation, testing, and selection of friction couples. – Moscow: Nauka. (in Russian).
• Chichinadze A.V. (1995): Processes in heat dynamics and modeling of friction and wear (dry and boundary friction). – Tribology International, vol.8, No.1, pp.55-58.
• Gavrikov M.V. and Mazing R.L. (1988): The hereditary-ageing model of wear and its application to problems with monotonically increasing contact zone. – Treniye i Iznos, vol.9, No.2, pp.274-279.
• Hebda M. and Chichinadze A.V. (1989): Vol. 1; (1990): Vol. 2; (1992): Vol. 3. Reference Manual on Tribology. – Mashinostrojenie, Moscow. (in Russian).
• Ibrahim R.A. (1994): Friction-induced vibration, chatter, squeal and chaos. Part 1: Mechanics of contact and friction., Part 2: Dynamics and modeling. – Appl. Mech. Rev., vol.47, No.7, pp.209-253.
• Kragelsky I.V. and Shchedrov V.S. (1956): Development of the science of friction. –Izd. Acad. Nauk SSSR, Moscow. (in Russian)
• Kuzmenko A.G. (1981): Contact problems allowing for wear for cylindrical sliding supports. – Treniye i Iznos, vol.2, No.3, pp.502-512.
• Lawrowski Z. (1993): Tribology. Friction, Wear and Lubrication. – Warsaw: PWN. (in Polish)
• Oden J.T. and Martins J.A.C. (1985): Models and computational methods for dynamic friction phenomena. – Comput. Methods Appl. Mech. and Engrg., vol.52, No.1-3, pp.527-634.
• Pyryev Yu. (2004): Dynamics of contact systems with including heat generation, friction and wear. – Postdoctoral thesis, Scientific Booklets No. 936, TU of Lodz, Lodz. (in Polish).
• Sadowski J. (1999): Thermodynamic interpretation of friction and wear. – Radom: TU of Radom. (in Polish).
• Solski P. and Ziemba S. (1969): Issues of wear of elements of machines caused by friction. – Warsaw: PWN. (in Polish).
• Yevtushenko A. and Pyryev Yu. (1998): Calculation of the contact temperature and wear of frictional elements of brakes. – Mater. Sci., vol.34, No.2, pp.249-254.
• Yevtushenko A. and Pyryev Yu. (1999a): Calculation of the contact temperature and wear during braking. – J. Math. Sci., vol.96, No.1, pp.2892-2896.
• Yevtushenko A. and Pyryev Yu. (1999b): The applicability of a hereditary model of wear with an exponential kernel in the one-dimensional contact problem taking frictional heat generation into account. – J. Appl. Maths. Mechs., vol.63, No.5, pp.795-801.