Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-article-BPZ5-0004-0029

Czasopismo

International Journal of Applied Mechanics and Engineering

Tytuł artykułu

Process of dynamic rollover stability research

Autorzy Zikmund, T.  Svoboda, P. 
Treść / Zawartość http://www.ijame.uz.zgora.pl/ http://www.degruyter.com/view/j/ijame
Warianty tytułu
Języki publikacji EN
Abstrakty
EN The paper describes the process of dynamic rollover stability research carried out at the Department of Transport Means of Jan Perner Transport Faculty. The paper is focused especially on stability of heavy tank vehicles and the influence of sloshing liquids inside the tank on it. Firstly the current state of research in this field is characterised and main problems are marked. A description of techniques used to acquire real data for the simulation model of the Tatra T148 CAP tank truck and experimental methods proposed for tuning and verification of the model follow. The final objective is to exactly describe processes preceding the total rollover and the influence of sloshing liquids on the rollover stability of tank vehicles.
Słowa kluczowe
PL stabilność pojazdu   określenie położenia środka ciężkości   określenie momentu zwoju inercji   testy na prawo jazdy   pomiar kąta  
EN vehicle rollover stability   determination of the position of the centre of gravity   determination of the roll moment of inertia   driving test   driving dynamics measurement system   steering angle measurement  
Wydawca Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
Czasopismo International Journal of Applied Mechanics and Engineering
Rocznik 2010
Tom Vol. 15, no 2
Strony 521--530
Opis fizyczny Bibliogr. 7 poz., rys.
Twórcy
autor Zikmund, T.
autor Svoboda, P.
  • University of Pardubice, Jan Perner Transport Faculty Studentska 95, 532 10 Pardubice, CZECH REPUBLIC, tomas.zikmund@upce.cz
Bibliografia
Jarosik J. (2007): Project of Safety Equipment for Vehicle Dynamic Stability Tests. – Pardubice, 48 p. Diploma thesis. University of Pardubice, Jan Perner Transport Faculty, Department of Transport Means.
Safercar.gov: [online]. [cit. 2010-03-29]. Available from WWW: <http://www.safercar.gov/ >.
Svoboda P. (2008): Measurement of the centre of gravity and roll moment of inertia of the TATRA T148 CAP vehicle. In: 34th International Conference of Departments of Transportation, Handling, Building and Agricultural Machines 2008. – Kravare : VSB-Technical University of Ostrava,. pp.6. ISBN 978-80-248-1820-7.
Tesar M. (2003): Assessment and evaluation of heavy commercial vehicles stability from the rollover point of view. – Pardubice, 102 p. Habilitation. University of Pardubice, Jan Perner Transport Faculty, Department of Transport Means.
UNECE Regulation No. 111. Uniform provisions concerning the approval of tank vehicles of categories N and O with regard to rollover stability.
Winkler Ch.B., Blower D., Ervin R.D. and Chalasani R.M. (2000): Rollover of Heavy Commercial Vehicles. – Warrendale, PA, U.S.A.: Society of Automotive Engineers, Inc., 71 p. ISBN 0-7680-0626-0.
Zikmund T. (2006): Dynamics of Chassis Parts of Road Vehicles. – Pardubice, 107 p. Dissertation. University of Pardubice, Jan Perner Transport Faculty, Department of Transport Means.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-article-BPZ5-0004-0029
Identyfikatory