Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-article-BPZ5-0004-0020

Czasopismo

International Journal of Applied Mechanics and Engineering

Tytuł artykułu

Cutting fluids and their influence on cutting process

Autorzy Cillikova, M.  Micietova, A.  Salaj, J. 
Treść / Zawartość http://www.ijame.uz.zgora.pl/ http://www.degruyter.com/view/j/ijame
Warianty tytułu
Języki publikacji EN
Abstrakty
EN The paper deals with the influence of a cutting fluid on the cutting force and machined surface when turning steel 12050. Cutting fluids, Emulzín H, RO 32 were applied in the experiments. Some of the experiments were performed without a coolant.
Słowa kluczowe
PL płyny   toczenie   skrawanie   obróbka skrawaniem  
EN fluids   cutting   turning   cutting force  
Wydawca Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
Czasopismo International Journal of Applied Mechanics and Engineering
Rocznik 2010
Tom Vol. 15, no 2
Strony 457--461
Opis fizyczny Bibliogr. 6 poz., wykr.
Twórcy
autor Cillikova, M.
autor Micietova, A.
autor Salaj, J.
  • University of Žilina, Faculty of Mechanical Engineering Department of Machining and Manufacturing Engineering Univerzitná 1, 010 26 Žilina, SLOVAKIA, maria.cillikova@fstroj.uniza.sk
Bibliografia
Čilliková M., Pilc J. and Stančeková. D. (2005): Cutting fluids and their applications. – EDIS Žilina, ISBN 80-8070-428-7.
Čilliková M., Pilc J. and Mádl J. (2008): Top trends in machining. VI. Part, Media Process. – MEDIA/ST, ISBN 978-80-969789-3-9.
Čilliková M., Salaj J., Mičietová A. and Pilc J. (2009): Influence of cutting fluids on cutting forces when grinding bearing steel. – Journal of Machine Manufacturing Design and Manufacturing, The Scientific Society for Mechanical Engineering, Hungary, vol.XLIX.2009, No.E3-E5, INDEX: 25344 HU ISSN 0016-8580, pp.101-103.
Neslušan M., Šípek M. and Čilliková M. (2009): Study of cutting process during hard turnings wheen application AE. –Technological Engineering, vol.6, No.2, Scientific-Technical Society by University of Žilina, ISSN 1336-5967, pp.52-55.
Pilc J., Mičietová A., Salaj J. and Čilliková M. (2007): Geometry characteristics of rotary turning tools. – 24th Interbnational Colloquim Anvanted Manufacturing and Repair Technologies in Vehicle Industry, Svitavy – Czech Republic, ISBN 978-80-7194-962-6.
Poppeová V. and Uríček J. (2009): The Design Kinematic Structure Mechanical Subsystem. – In International Scientific Conference MOTSP, ISBN 978-953-6313-09-9.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-article-BPZ5-0004-0020
Identyfikatory