Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-article-BPZ5-0004-0008

Czasopismo

International Journal of Applied Mechanics and Engineering

Tytuł artykułu

Economic efficiency of engineering material cutting technologies

Autorzy Micietova, A.  Cillikova, M.  Salaj, J. 
Treść / Zawartość http://www.ijame.uz.zgora.pl/ http://www.degruyter.com/view/j/ijame
Warianty tytułu
Języki publikacji EN
Abstrakty
EN Non-conventional methods are used more and more frequently for metal cutting in practice. Some methods such as laser cutting and abrasive water jet cutting are very often applied. Economic and ecological factors strongly influence the application of a method chosen for the cutting process. Considering the economic efficiency there should be formulated a cost model for comparison of different methods of metal cutting. This model should involve all aspects influencing the cutting process. This paper deals with the analysis of important cost items when a material is cut by oxygen , laser and water jet.
Słowa kluczowe
PL redukcja   laser   strumień wody   tlen  
EN cutting   laser   water jet   cost  
Wydawca Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
Czasopismo International Journal of Applied Mechanics and Engineering
Rocznik 2010
Tom Vol. 15, no 2
Strony 369--375
Opis fizyczny Bibliogr. 5 poz., tab., wykr.
Twórcy
autor Micietova, A.
autor Cillikova, M.
autor Salaj, J.
  • University of Žilina, Faculty of Mechanical Engineering Department of Machining and Manufacturing Engineering Univerzitná 1, 010 26 Žilina, SLOVAKIA, anna.micietova@fstroj.uniza.sk
Bibliografia
Kupkovič M. (1996): Business Economy. – Bratislava: Sprint (in Slovak).
Maňková I. (2000): Progresive technologies. – Košice: Vienala (in Slovak).
Mičietová A. (2001): Non – conventional methods of machining. – Žilina: EDIS –ŽU (in Slovak).
Mičietová A. Čilliková M. and Neslušan M. (2002): Determinig factors and their interaction at non-conventional machining technologies. – In: 5th Scientific Conference of Mechanical Engineering Faculty, Žilina, pp.13-14.
Mičietová A., Neslušan M. and Pilc J. (2000): Influence of economic factors on choice of non- conventional technologies. – In: The 11th International DAAAM Symposium“ Intelligent Manufacturing and Automation: Opatija, Croatia, pp.307-308.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-article-BPZ5-0004-0008
Identyfikatory