Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first last
cannonical link button


International Journal of Applied Mechanics and Engineering

Tytuł artykułu

Delamination of an elastic circular membrane under hydrostatic pressure

Autorzy Orloff, D.  Bloom, F. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
EN A mathematical model is constructed with the goal of providing criteria to determine the critical internal pressure at which an elastic membrane bonded to a plate (the substrate) separates from the plate; this critical pressure corresponds physically to the internal pressure at which the glue bond which holds the edge of an initially circular membrane (fixed along the boundary of a hole in the plate, of radius a) will begin to fracture. Unlike much of the previous work in this area, no assumption is made that the inflated membrane (blister) takes the shape of a spherical cap and the analytical criterion for delamination appears to be new.
Słowa kluczowe
PL rozwarstwienie   membrana  
EN delamination   membrane   fracture  
Wydawca Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
Czasopismo International Journal of Applied Mechanics and Engineering
Rocznik 2009
Tom Vol. 14, no 4
Strony 1053--1071
Opis fizyczny Bibliogr. 14 poz., tab., wykr.
autor Orloff, D.
autor Bloom, F.
  • Institute of Paper Science and Technology of the Georgia Institute of Technology 500 10th St., N.W. Atlanta, GA 30332-0620, US,
Arjun A. and Wan K.T. (2005): Derivation of the strain energy release rate G from first principles for the pressurized Blister test. - International Journal of Adhesion and Adhesives, vol.25, pp.13-18.
Bennett S.J., DeVries K.J. and Williams M.L. (1974): Adhesive fracture mechanics. - Int. J. of Fracture, vol.10, pp.33-43.
Briscoe B.J. and Panesar S.S. (1991): The application of the Blister test to an elastometric adhesive. - Proc. R. Soc. Lond. A, vol.444, pp.23-43.
Dannenberg H. (1961): Measurement of adhesion by a blister method. - Journal of Applied Polymer Science, vol.5, No.1, pp.125-134.
Gent A.N. and Kaang S. (1989): Pull-off forces for adhesive tapes. - J. Appl. Polymer Sci., vol.32, pp.4689-4700.
Gent A.N. and Lewandowski L.H. (1987): Blow-off pressures for adhering layers. - Journal of Applied Polymer Science, vol.33, pp.1567-1577.
Hinkley J.A. (1983): A Blister test for adhesion of polymer films to SiO2. - J. Adhesion, vol.16, pp.115-126.
Mossakovskii V.I. and Rybka M..T. (1964): Generalization of the Griffith-Sneddon criterion for the case of a non-homogeneous body. - PMM, vol.28, No.6, pp.1061-1069.
Plaut R.H., White S.A. and Dillard D.A. (2003): Effect of work of adhesion on contact of a pressurized Blister with a flat surface. - Int. J. of Adhesion and Adhesives, vol.23, pp.207-214.
Wan K.T. (1999): Fracture mechanics of a shaft-loaded Blister test-transition from a bending plate to a stretching membrane. - Journal of Adhesion, vol.71, No.2-3, pp.337-337.
Wan K.-T., Guo S. and Dillard D.A. (2003): A theoretical and numerical study of a thin clamped circular film under an external load in the presence of a tensile residual stress. - Thin Solid Films, vol.425, pp.150-162.
Williams M.L. (1969): The continuum interpretation for fracture and adhesion. - Journal of Applied Polymer Science, vol.13, pp.29-40.
Williams J.G. (1997): Energy release rates for peeling of flexible membranes and the analysis of blister tests. - Int. Journal of Fracture, vol.87, pp.265-288.
Zheng M., Su Y.J., Chen L.Q. and Zhang T.Y. (1999): Frictional effects of interface bonding energy in Blister testing. - Theor. and Appl. Fracture Mech., vol.32, pp.75-80.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-article-BPZ5-0003-0010