PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Pressure drops in the flow through an annular die of a polymer modelled by a Herschel-Bulkley fluid

Identyfikatory
Warianty tytułu
Konferencja
Third International Conference on Engineering Rheology, ICER 2005
Języki publikacji
EN
Abstrakty
EN
Technologies applied in polymer processing require permanent improvement by better recognition of material properties of polymer, mechanisms of process and physical phenomena arising in processing. In the work a polymer flow in an annular die modelled as narrow clearance between two fixed surfaces of revolution is considered. The problem is described by boundary layer equations. Using the method of averaged inertia one obtains the formulae expressing the pressure distribution. Generally, the flow of polymer given by the nonlinear model of Shulman is considered. The molten polymer modelled by a Herschel-Bulkley model flowing through an annular spherical channel is discussed in detail.
Rocznik
Strony
39--46
Opis fizyczny
Bibliogr. 9 poz., tab., wykr.
Twórcy
autor
autor
  • University of Zielona Góra, Department of Mechanics, 65-246 Zielona Góra, ul. Szafrana 2, POLAND
autor
  • University of Zielona Góra, Department of Mechanics, 65-246 Zielona Góra, ul. Szafrana 2, POLAND
autor
  • University of Zielona Góra, Department of Mechanics, 65-246 Zielona Góra, ul. Szafrana 2, POLAND
Bibliografia
  • [1] Avenas P., Agassant J.-F. and Sergent J.P. (1982): La Misę en Formę des Matiere Plastiąues. - Paris: Tec-Doc. Lavoisier.
  • [2] Hashimoto H. and Amagai K. (1993): A theoretical model for multiphase flow with solidified particles. - JSME Int. Ser. B, vol.36, No.4, pp.584-591.
  • [3] Michalski D. (2004): Mathematical modelling of polymers flows in extrusion heads and the channels of injecticm moulds (in Polish). - PhD Thesis, University of Zielona Góra, pp. 1-247.
  • [4] Shulman Z.P. (1975): Convective heat transfer of rheologically complex fluids (in Russian). - Moscow: Energy.
  • [5] Walicka A. (1993): Averaged inertia method for the flow ofviscous fluid in a slot between fixed surfaces of revolution. - ZN WSI Zielona Góra, Mechanika, vol.l8, pp. 153-163.
  • [6] Walicka A. (1999): Analysis of polymers flow through dies of forming devices. - Applied Mechanics and Engineering. vol.4, No.2, pp.265-270.
  • [7] Walicka A. (2002a): Rheodynamics of Non-Newtonian Fluids in Straight and Curved Channels (in Polish). - Zielona Góra: University Press.
  • [8] Walicka A. (2002b): Rotational flows of the rheologially complex media in thin annular channels (in Russian). - Zielona Góra: University Press.
  • [9] Walicki E. and Walicka A. (1998): Simulation of the polymer flow through dies of forming devices. - 5th Europeac Rheology Conference, Slovenia, Mat. Konf., September 6-11, pp.417-418.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPZ2-0015-0029
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.