Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-article-BPZ2-0013-0042

Czasopismo

International Journal of Applied Mechanics and Engineering

Tytuł artykułu

Transversely rough slider bearings with squeeze film formed by a magnetic fluid

Autorzy Deheri, G.M.  Andharia, P.I.  Patel, R.M. 
Treść / Zawartość http://www.ijame.uz.zgora.pl/ http://www.degruyter.com/view/j/ijame
Warianty tytułu
Języki publikacji EN
Abstrakty
EN In this article it has been sought to study the effect of transverse roughness on the behaviour of slider bearings with squeeze film formed by a magnetic fluid. The roughness of the bearing surface is modelled by a stochastic random variable with non zero mean, variance and skewness. The associated Reynolds' equation is stochastically averaged with respect to the random roughness parameter. Results for bearing performance characteristics such as load carrying capacity, center of pressure, frictional force and coefficient of friction for different values of mean, standard deviation and measure of symmetry are numerically computed. In order to decipher the quantitative effect of roughness on the performance characteristics four different shapes namely; plane slider, exponential slider, hyperbolic slider and secant slider for the lubricant film are considered. The results are presented graphically. It is noticed that the bearing suffers on account of transverse surface roughness. The results show that the use of a magnetic fluid as lubricant increases the load carrying capacity, decreases the coefficient of friction and affects the center of pressure marginally. It is further observed that the effect of magnetization on the plane and secant shaped bearings is nominal while the effect on exponential and hyperbolic slider bearing is significant. In addition it is easily seen that by increasing the strength of the magnetic field the adverse impact on the bearing due to roughness can be minimized.
Słowa kluczowe
PL reologia   łożysko   ciecz magnetyczna  
EN slider bearing   squeeze film   rough surfaces   magnetic fluid  
Wydawca Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
Czasopismo International Journal of Applied Mechanics and Engineering
Rocznik 2005
Tom Vol. 10, no 1
Strony 53--76
Opis fizyczny Bibliogr. 29 poz., wykr.
Twórcy
autor Deheri, G.M.
  • Department of Mathematics, Sardar Patel University Vallabh Vidyanagar 388 120, Gujarat State, INDIA
autor Andharia, P.I.
  • Bhavnagar University, S. S. Computer Center Bhavnagar 364 002, Gujarat State, INDIA
autor Patel, R.M.
  • Department of Mathematics, Gujarat Arts and Science College Ahmedabad 380 006 Gujarat State, INDIA, jrmpatel@rediffmail.com
Bibliografia
[1] Agrawal V.K. (1986): Magnetic-fluid-based porous inclined slider bearing. - WEAR, vol.107, pp.133-139.
[2] Andharia P.I., Gupta J.L. and Deheri G.M. (1997): Effect of longitudinal surface roughness on hydrodynamic lubrication of slider bearings. - Proc. Tenth International Conference on Surface Modification Technologies, The Institute of Materials, pp.872-880.
[3] Andharia P.I., Gupta J.L. and Deheri G.M. (1999): Effect of transverse surface roughness on the behaviour of squeeze film in a spherical bearing. - Journal of Applied Mechanics and Engineering, vo1.4, pp.19-24.
[4] Bagci C. and Singh A.P. (1983): Hydrodynamic lubrication of finite slider bearing: Effect of one dimensional film shape and their computer aided optimum designs. - ASLE Trans., J. Lub. Tech., vo1.105, pp.48-66.
[5] Berthe D. and Godet M. (1973): A more general form of Reynolds equation - application to rough surfaces. - WEAR, vo1.27, pp.345-357.
[6] Bhat M.V. (1978): Hydrodynamic lubrication of a porous composite slider bearing. - Jap. J. App. Phys., vo1.17, pp.4 79-481.
[7] Bhat M.V. and Deheri G.M. (1991): Porous composite slider bearing lubricated with magnetic fluid. - Japanese Journal of Applied Physics, vo1.30, pp.2513-2514.
[8] Bhat M.V. and Deheri G.M. (1995): Porous slider bearings with squeeze film formed by a magneticfluid. - Pure and Applied Mathematika Sciences, vo1.39, No.1-2, pp.39-43.
[9] Bhat M.V. and Patel C.M. (1981): The squeeze film in an inclined porous slider bearing. - WEAR, vo1.66, pp.189-193.
[10] Burton R.A. (1963): Effect of two dimensional sinusoidal roughness on the load support characteristics of a lubricant film. - J. Basic Eng. Trans. ASME, vo1.85, pp.258-264.
[11] Christensen H. and Tender K.C. (1969a): Tribology of rough surfaces: Stochastic models of hydrodynamic lubrication. - SINTEF Report No.10/69-18.
[12] Christensen H. and Tender K.C. (1969b): Tribology of rough surfaces: Parametric study and comparison of lubrication models. - SINTEF Report No.22/69-18.
[13] Christensen H. and Tender K.C. (1970): The hydrodynamic lubrication of rough bearing surfaces of finite width. - ASME-ASLE Lubrication Conference, Paper No.70-Lub-7.
[14] Davies M.G. (1963): The generation of pressure between rough fluid lubricated, moving, deformable surfaces. - Lub. Eng., vo1.19, pp.246.
[15] Deheri G.M., Andharia P.J. and Patel R.M. (2004): Longitudinally rough slider bearing with squeeze film formed by a magnetic fluid. - Industrial Lubrication and Tribology, vol.56, No.3, pp.177-187.
[16] Guha S.K. (1993): Analysis of dynamic characteristics of hydrodynamic journal bearings with isotropic roughness effects. - WEAR, vo1.167, pp.173-179.
[17] Gupta LL. and Deheri G.M. (1996): Effect of roughness on the behaviour of squeeze film in a spherical bearing. - Tribology Transactions, vo1.39, pp.99-102.
[18] Hamrock BJ. (1994): Fundamentals of Fluid Film Lubrication. - New York: McGraw Hill.
[19] Michell A.G.M. (1950): Lubrication, its Principle and Practice. - London: Blackie, p.317.
[20] Pinkus O. and Sternlitcht B. (1961): Theory of Hydrodynamic Lubrication. - New York: McGraw Hill Book Company.
[21] Prajapati B.L. (1991): Behaviour of squeeze film between rotating porous circular plates: Surface roughness and elastic deformation effects. - Pure and Appl. Math. Sci., vo1.33, No.l-2, p.27.
[22] Prajapati B.L. (1992): Squeeze film behaviour between rotating porous circular plates with a concentric circular pocket: Surface roughness and elastic deformation effects. - WEAR, vo1.152, p.301.
[23] Prajapati B.L. (1995): On certain theoretical studies in hydrodynamics and electromagnohydrodynamic lubrication. - Disseration, Sardar Patel University, Vallabh Vidyanagar.
[24] Prakash J. and Tiwari K. (1982): Lubrication of a porous bearing with surface corrugations. - J. Lub. Tech., Trans. ASME, vol.l04, pp.127-134.
[25] Prakash J. and Tiwari K. (1983): Roughness effects in porous circular squeeze-plates with arbitrary wall thickness. - J. Lub. Tech., vo1.105, p.90.
[26] Prakash J. and Vij S.K. (1973): Hydrodynamic lubrication of a porous slider. - J. Mech. Eng. Sc., vol.15, pp.232-234.
[27] Ting L.L. (1975): Engagement behaviour of lubricated porous annular disks Part l: Squeeze film phase, surface roughness and elastic deformation effects. - WEAR, vo1.34, pp.l59-182.
[28] Tender K.C. (1972): Surface distributed waviness and roughness. - First World Conference in Industrial Tribology, New Delhi, A3, pp.1-8.
[29] Tzeng S.T. and Saibel E. (1967): Surface roughness effect on slider bearing lubrication. - Trans. ASME, J. Lub. Tech., vol.l0, pp.334-338.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-article-BPZ2-0013-0042
Identyfikatory