Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-article-BPW8-0017-0017

Czasopismo

Przegląd Elektrotechniczny

Tytuł artykułu

Review of overvoltage and resonance problems and reduction of in a DTC-controlled five-level flying capacitor drive

Autorzy Arasteh, M.  Rahmati, A.  Farhangi, S.  Abrishamifar, A. 
Treść / Zawartość http://pe.org.pl/
Warianty tytułu
PL Problem przepięć i rezonansów w wielopoziomowych napędach typu DTC ze sterowaną pojemnością
Języki publikacji EN
Abstrakty
EN The overvoltage and resonance problems that cause early defects in the stator winding insulation are well known in the low voltage drives. This paper investigates these problems the medium voltage drives and offers the necessary measures to prevent these problems in a DTCcontrolled five-level flying capacitor drive. With properly designed switching tables and using a fixed switching frequency, occurrence of overvoltage is prevented. Also, using a fixed switching frequency of occurrence of resonance is prevented. Simulation results and implementing a 3kVA samples using direct torque control strategy has been presented confirming the proposed solutions.
PL Problemy przepięć i rezonansów powodujących uszkodzenia izolacji stojana są dobrze znanym problemem napędów niskonapięciowych. W artykule zbada no podobne zjawiska występujące w napędach średniego napięcia i zaproponowano metody zapobiegania tym problemom na przykładzie pięciopoziomowego napędu ze sterowaną pojemnością. Dzięki prawidłowemu zaprojektowaniu systemu przełączania zapobiega się przepięciom. Rezultaty symulacji i zastosowanie w układzie 3 kVA potwierdziły założenia pracy.
Słowa kluczowe
PL przepięcia   rezonans  
EN voltage reflection   resonance phenomena   flying capacitor inverter  
Wydawca Wydawnictwo SIGMA-NOT
Czasopismo Przegląd Elektrotechniczny
Rocznik 2011
Tom R. 87, nr 2
Strony 269--275
Opis fizyczny Bibliogr. 43 poz., rys., tab.
Twórcy
autor Arasteh, M.
autor Rahmati, A.
autor Farhangi, S.
autor Abrishamifar, A.
  • School of Electrical Engineering, Iran University of Science and Technology, Narmak, Teheran, Iran, arasteh@ee.iust.ac.ir
Bibliografia
[1] E. Persson, “Transient effects in application of PWM inverters to induction motors,” IEEE Trans. Ind. Applicat., vol. 28, pp. 1095–1101,Sept./Oct. 1992.
[2] R. Kerkman, D. Leggate, and G. Skibinski, “Interaction of drive modulation and cable parameters on AC motor transients,” IEEE Trans. Ind. Appl.,VOL. 33, NO. 3, MAY/JUNE 1997
[3] José Rodríguez, Steffen Bernet, BinWu, Jorge O. Pontt and Samir Kouro, “Multilevel Voltage-Source-Converter Topologies for Industrial Medium-Voltage Drives”, IEEE Trans. On Industrial Electronics, Vol. 54, NO. 6, DEC 2007
[4] S. S. Fazel, Steffen Bernet, D. Krug, and K. Jalili, “Design and Comparison of 4-kV Neutral-Point-Clamped, Flying-Capacitor, and Series-Connected H-Bridge Multilevel Converters”, IEEE Trans. Ind. Applicat, vol. 43, Jul./Aug. 2007 ,pp. 1032-1040.
[5] D. Krug, S. Bernet, S. S. Fazel, K. Jalili, and M. Malinowski, “Comparison of 2.3-kV Medium-Voltage Multilevel Converters for Industrial Medium-Voltage Drives”, IEEE Trans. on Indust. Elec., Vol. 54, NO. 6, DEC 2007
[6] J. Rodríguez, J.Pontt, S. Kouro, and P. Correa, “Direct Torque Control With Imposed Switching Frequency in an 11-Level Cascaded Inverter”, IEEE Trans. On Industrial Electronics, vol. 51, Aug. 2004 pp. 827-833.
[7] A. Sapin, P. K. Steimer, and J.-J. Simond, “Modeling, Simulation, and Test of a Three-Level Voltage-Source Inverter With Output LC Filter and Direct Torque Control”, IEEE Trans. Ind. Appl., Vol. 43, NO. 2, MAR/APRIL 2007
[8] C. A. Martins, X. Roboam, T. A. Meynard,and A. S. Carvalho,“Switching Frequency Imposition and Ripple Reduction in DTC Drives by Using a Multilevel Converter,” IEEE Trans. On POWER ELECTRONICS, VOL. 17, NO. 2, MARCH 2002
[9] M.F. Escalante, J.-C. Vannier and A. Arzande, “Flying Capacitor Multilevel Inverters and DTC Motor Drive Applications”, IEEE Trans. on Indust. Elec., vol.49, Aug. 2002, pp.809 – 815.
[10] N. Aoki, K. Satoh, and A. Nabae, “Damping Circuit to Suppress Motor Terminal Overvoltage and Ringing in PWM Inverter-Fed AC Motor Drive Systems with Long Motor Leads,” IEEE Trans. Ind. Appl., VOL. 35, NO. 5, SEPTEMBER/OCTOBER 1999
[11] T. R. Mukundan, “Calculation of Voltage Surges on Motors Fed From PWM Drives—A Simplified Approach,” IEEE TRANSACTIONS ON ENERGY CONVERSION, VOL. 19, NO. 1, MARCH 2004
[12] F. Moreira, T. A. Lipo, G. Venkataramanan, and S. Bernet, “High-Frequency Modeling for Cable and Induction Motor Overvoltage Studies in Long Cable Drives,” IEEE Trans. Ind. Appl.,VOL. 38, NO. 5, SEP/OCT 2002
[13] Mirafzal, G. Skibinski, R. Tallam, D. Schlegel, and R. Lukaszewski,“Universal induction motor model with low-to-high frequency response characteristics,” IEEE Trans. Ind. Appl., vol. 43, no. 5, pp. 1233–1246,Sep./Oct. 2007.
[14] Mirafzal, G. Skibinski, R. Tallam, “Determination of Parameters in the Universal Induction Motor Model,” IEEE Trans. Ind. Appl., vol. 45, no. 1, JAN/FEB 2009
[15] S. Amarir, and K. Al-Haddad, “A Modeling Technique to Analyze the Impact of Inverter Supply Voltage and Cable Length on Industrial Motor-Drives,” IEEE Trans. On POWER ELECTRONICS, VOL. 23, NO. 2, MARCH 2008
[16] N. Idir, Y. Weens, M. Moreau, and J. J. Franchaud, “High- Frequency Behavior Models of AC Motors,” IEEE Trans. On MAGNETICS, VOL. 45, NO. 1, JAN 2009
[17] D. Paula, D. A. D. Andrade, M. L. R. Chaves, J. L. Domingos, and M. A. A. de Freitas, “Methodology for Cable Modeling and Simulation for High-Frequency Phenomena Studies in PWM Motor Drives,” IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 23, NO. 2, MARCH 2008
[18] E. J. Bartolucci,and B. H. Finke, “Cable Design for PWM Variable-Speed AC Drives”, IEEE Trans. Ind. Appl., VOL. 37, NO. 2, MARCH/APRIL 2001
[19] Cavallini, D. Fabiani, and G. C. Montanari, “Power Electronics and Electrical Insulation Systems – Part 1: Phenomenology Overview,” IEEE Electr. Insul. Mag., vol. 26, issue 3, pp. 7–15 May-June 2010
[20] V. Jouanne, P. N. Enjeti, and J. W. Gray, “Filtering techniques to minimize the effect of long motor leads on PWM inverter-fed AC motor drive systems,” IEEE Trans. Ind. Appl., vol. 32, no. 4, pp. 919–926, Jul./Aug. 1996.
[21] A. von Jouanne and P. N. Enjeti, “Design considerations for an inverter output filter to mitigate the effects of long motor leads in ASD applications,” IEEE Trans. Ind. Appl., vol. 33, no. 5, pp. 1138–1145, Sep./Oct. 1997.
[22] F. Moreira,P. M. Santos, T. A. Lipo,and G. Venkataramanan, “Filter Networks for Long Cable Drives and Their Influence on Motor Voltage Distribution and Common-Mode Currents,” IEEE Trans. On INDUSTRIAL ELECTRONICS, VOL. 52, NO. 2, APRIL 2005
[23] D. A. Rendusara, and P. N. Enjeti, “An Improved Inverter Output Filter Configuration Reduces Common and Differential Modes dv/dt at the Motor Terminals in PWM Drive Systems,” IEEE Trans. On POWER ELECTRONICS, VOL. 13, NO. 6, NOVEMBER 1998
[24] T. G. Habetler, R. Naik, and Thomas A. Nondahl, “Design and Implementation of an Inverter Output LC Filter Used for dv/dt Reduction”, IEEE Trans. On POWER ELECTRONICS, VOL. 17, NO. 3, MAY 2002
[25] N. Hanigovszki, J. Poulsen, and F. Blaabjerg, “A Novel Output Filter Topology to Reduce Motor Overvoltage,” IEEE Trans. Ind. Appl. VOL. 40, NO. 3, MAY/JUNE 2004
[26] H. Akagi, and S. Tamura “A Passive EMI Filter for Eliminating Both Bearing Current and Ground Leakage Current From an Inverter-Driven Motor,” IEEE Trans. On POWER ELECTRONICS, VOL. 21, NO. 5, SEPTEMBER 2006
[27] X. Chen, D. Xu, F. Liu, and J. Zhang, “A Novel Inverter- Output Passive Filter for Reducing Both Differential- and Common-Mode dv/dt at the Motor Terminals in PWM Drive Systems,” IEEE Trans. On INDUSTRIAL ELECTRONICS, VOL. 54, NO. 1, FEBRUARY 2007
[28] J. C. G. Wheeler, “Effects of converter pulses on the electrical insulation in low and medium voltage motors,” IEEE Electr. Insul. Mag., vol. 21, no.2, pp. 22–29, 2005.
[29] J. M. Bentley, and P. J. Link, “Evaluation of Motor Power Cables for PWM AC Drives,” IEEE Trans. On INDUSTRY APPLICATIONS, VOL. 33, NO. 2, MARCH/APRIL 1997
[30] L. Zhou, and S. A. Boggs,“High Frequency Attenuating Cable for Protection of Low-Voltage AC Motors Fed by PWM Inverters,” IEEE TRANSACTIONS ON POWER DELIVERY, VOL. 20, NO. 2, APRIL 2005
[31] M. J. Melfi, ”Low-Voltage PWM Inverter-Fed Motor Insulation Issues,” IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, VOL. 42, NO. 1, JAN/FEB 2006
[32] F.P. Espino-Cortes, E.A. Cherney, and S. Jayaram, “Effectiveness of stress grading coatings on form wound stator coil groundwall insulation under fast rise time pulse voltage,” IEEE Trans. On Energy Conversion, Vol. 20, pp. 844-851, Dec. 2005.
[33] F.P. Espino-Cortes, E.A. Cherney, and S. Jayaram, “Impact of Inverter Drives Employing Fast-Switching Devices on Form- Wound AC Machine Stator Coil Stress Grading,” IEEE Electrical Insulation Magazine, Vol. 23, No. 1, pp. 16 – 28, January/February 2007 — Vol. 23, No. 1
[34] F.P. Espino-Cortes, S. Jayaram, and E.A. Cherney, “Stress grading materials for cable determinations under fast-rise time pulses,” IEEE Trans. On Dielectrics and Electrical Insulation, Vol. 13, pp. 430-435, Apr. 2006.
[35] S. U. Haq, S. H. Jayaram, and E. A. Cherney, “Insulation Problems in Medium-Voltage Stator Coils Under Fast Repetitive Voltage Pulses,” IEEE Trans. On INDUSTRY APPLICATIONS, VOL. 44, NO. 4, JULY/AUGUST 2008
[36] M. J. Islam, H. V. Khang, A.-K. Repo, and A. Arkkio, “Eddy- Current Loss and Temperature Rise in the Form-Wound Stator Winding of an Inverter-Fed Cage Induction Motor,” IEEE Trans. On MAGNETICS, VOL. 46, NO. 8, AUG 2010
[37] FZ600R65KF1 Datasheet. Available at: www.EUPEC.com.
[38] MBN1200E25C, MBN1200E33C, MBN1200H45E2, MBN750H65E2 Datasheet. Available at: www.pi.hitachi.jp/pse.
[39] CM900HB-90H Datasheet. Available at: www.mitsubishichips.com.
[40] J. Rodríguez, J. Pontt, C. Silva, R. Musalem, P. Newman, R. Vargas, and S. Fuentes, “Resonances and Overvoltages in a medium-voltage fan motor drive with long cables in an underground mine,” IEEE Trans. Ind. Appl., vol. 42, no. 3, pp. 856–863, May/Jun. 2006.
[41] F. Endrejat, and P. Pillay, “Resonance Overvoltages in Medium-Voltage Multilevel Drive Systems,” IEEE Trans. Ind. Appl., VOL. 45, NO. 4, JUL/AUG 2009
[42] N. R. N. Idris, and A. H. M. Yatim, “Direct Torque Control of Induction Machines With Constant Switching Frequency and Reduced Torque Ripple”, IEEE Trans. on Indust. Elec., VOL. 51, NO. 4, AUG 2004
[43] N. R. N. Idris, C. L. Toh, and M. E. Elbuluk,“A New Torque and Flux Controller for Direct Torque Control of Induction Machines,” IEEE Trans. Ind. Appl., Vol. 42, NO. 6, NOV/DEC 2006
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-article-BPW8-0017-0017
Identyfikatory