Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-article-BPOG-0053-0010

Czasopismo

Przegląd Elektrotechniczny

Tytuł artykułu

Nowoczesne rozwiązania plazmotronów do natryskiwania

Autorzy Żórawski, W.  Antoszewski, B. 
Treść / Zawartość http://pe.org.pl/
Warianty tytułu
EN State of art in plasma spraying
Języki publikacji PL
Abstrakty
PL W artykule przedstawiono rozwój plazmotronów do natryskiwania z uwzględnieniem diagnostyki strumienia plazmowego i jego wpływu na własności natryskanych powłok oraz najnowsze zastosowania tej techniki natryskiwania. Przedstawiono wyniki badań mikrostruktury i składu fazowego powłok NiCrBSi natryskanych plazmowo.
EN This paper presents development of thermal spray tequniques and shows state of art applications. Results of an investigation into the structure of plasma sprayed NiCrBSi coating is discussed. The powder granulometry and the microstructure of the plasma sprayed deposits were studied using an SEM/EDS analyzer. Phase composition was examined using the Bruker D-8 Advance diffractometer. The tests show that the coatings consist of an NiCrBSi deformed grains of powder and thin strips of oxides with low porosity and different phase composition than sprayed powder.
Słowa kluczowe
PL natryskiwanie plazmowe   NiCrBSi   mikrostruktura   porowatość  
EN plasma spraying   NiCrBSi   microstructure   porosity plasma  
Wydawca Wydawnictwo SIGMA-NOT
Czasopismo Przegląd Elektrotechniczny
Rocznik 2008
Tom R. 84, nr 7
Strony 135--137
Opis fizyczny Bibliogr. 24 poz., il., schem.
Twórcy
autor Żórawski, W.
autor Antoszewski, B.
  • Politechnika Świętokrzyska, Katedra Inżynierii Eksploatacji, Al. 1000-lecia PP 7, 25-314 Kielce, ktrba@tu.kielce.pl
Bibliografia
[1]. Pawlowski L.: The science and engineering of thermal spray coatings. John Wiley & Sons Ltd, Chichester 1995.
[2]. Zhang, Jialiang; Kobayashi, Akira; Excitation temperature of smart spraying plasmas produced from modulated arc discharge. Vacuum Volume: 80, Issue: 11-12, September 7, 2006, pp. 1185-1189.
[3]. Fukumasa, Osamu; Tagashira, Ryuma; Tachino, Kazufumi; Mukunoki, Hirotaka; Spraying of MgO films with a well-controlled plasma jet. Surface and Coatings Technology Volume: 169-170, Complete, June 2, 2003, pp. 579-582.
[4]. Xu, Dong-Yan; Chen, Xi Effects of surrounding gas on the long laminar argon plasma jet characteristics. International Communications in Heat and Mass Transfer Volume: 32, Issue: 7, July, 2005, pp. 939-946.
[5]. Morks, M.F.; Kobayashi, A.; Effect of gun current on the microstructure and crystallinity of plasma sprayed hydroxyapatite coatings. Applied Surface Science Volume: 253, Issue: 17, June 30, 2007, pp. 7136-7142.
[6]. Mariaux, Gilles; Vardelle, Armelle; 3-D time-dependent modelling of the plasma spray process. Part 1: flow modelling. International Journal of Thermal Sciences Volume: 44, Issue: 4, April, 2005, pp. 357-366.
[7]. Salhi, Zahir; Klein, Didier; Gougeon, Patrick; Coddet, Christian; Development of coating by thermal plasma spraying under very low-pressure condition <1mbar. Vacuum Volume: 77, Issue: 2, January 17, 2005, pp. 145-150.
[8]. Ma, W.; Pan, W.X.; Wu, C.K.; Preliminary investigations on low-pressure laminar plasma spray processing. Surface and Coatings Technology Volume: 191, Issue: 2-3, February 21, 2005, pp. 166-174.
[9]. Borisov Y., Chernyshow A., Korzhick V., Murashov A.: Plasma spraying of coatings using a protective nozzle. Proc. of 2nd Plasma-Technik Symp., Lucerne 1991.
[10]. Beauvais, S.; Guipont, V.; Borit, F.; Jeandin, M.; Español, M.; Khor, K.A.; Robisson, A.; Process-microstructure-property relationships in controlled atmosphere plasma spraying of ceramics. Surface and Coatings Technology Volume: 183, Issue: 2-3, May 24, 2004, pp. 204-211.
[11]. Sarafoglou, Ch.I.; Pantelis, D.I.; Beauvais, S.; Jeandin, M.; Study of Al2O3 coatings on AISI 316 stainless steel obtained by controlled atmosphere plasma spraying (CAPS). Surface & Coatings Technology Volume: 202, Issue: 1, November 15, 2007, pp. 155-161.
[12]. Miyoshi K.: Durability evaluation of selected solid lubricating films. Wear 251 (2001) 1061-1067.
[13]. Li, Chang-Jiu; Sun, Bo; Microstructure and property of Al2O3 coating microplasma-sprayed using a novel hollow cathode torch. Materials Letters Volume: 58, Issue: 1-2, January, 2004, pp. 179-183.
[14]. Barbezat G., Zierhut. J., Landes K.D.: Triplex- a high perfomance plasma torch. Proc of United Thermal Spray Conference’99, Düsseldorf 1999.
[15]. Nassenstein K., Peschka W.: Development of a new three cathode-plasma-gun. Proc. of International Thermal Spray Conference, Essen 2002.
[16]. Mauer G., Basen R., Stover D.; Preliminary study of the TriplexPro-200 gun for atmospheric plasma spraying of yttria stabilized zirconia. Proc of 3rd Recontres Projection Internationales Thermique, Lille 2007.
[17]. Barbezat G.: The internal plasma spraying on powerful technology for the aerospace and automotive industries. Proc. of 16th International Thermal Spray Conference, Singapore 2001.
[18]. Barbezat G.: Application of thermal spraying in the automobile industry. Surface and CoatingsTechnology 201 (2006) 2028-2031.
[19]. Ernst P., Barbezat G.: Thermal spray application in powertain contribute to the saving energy and material resources. Proc of 3rd Recontres Projection Internationales Thermique, Lille 2007.
[20]. Planche M.P., Liao H., Normand B., Coddet C.: Relationships between NiCrBSi particle characteristics and corresponding coating properties using different thermal spraying processes. Surface and Coatings Technology 200 (2005) 2465-2473.
[21]. Rodriguez J., Martin A., Fernandez R., Fernandez J.: An experimental study of the wear perfomance of NiCrBSi thermal spray coatings. Wear 255 (2003) 950-955.
[22]. Miguel J.M., Guilemany J.M., Vizczino S.: Tribological study of NiCrBSi coating obtained by different processes. Tribology International 36 (2003) 181-187.
[23]. Navas C., Colaco R., Damborenea J., Vilar R.: Abrasive wear behaviour of laser clad and flame sprayed-melted NiCrBSi coatings. Surface and Coatings Technology 200 (2006) 6854-6862.
[24]. Zhao W-M., Wang Y., Dong L-X., Wu K-Y., Xue J.: Corrosion mechanism of NiCrBSi coatings deposited by HVOF. Surface and Coatings Technology 190 (2005) 293-298.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-article-BPOG-0053-0010
Identyfikatory