Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button


Przegląd Elektrotechniczny

Tytuł artykułu

Modeling of Thermal effects on Magnetic Hysteresis using the Jiles-Atherton Model

Autorzy Ladimi, A.  Mekideche, M. 
Treść / Zawartość
Warianty tytułu
PL Modelowanie wpływu temperatury na pętlę histerezy przy wykorzystaniu modelu Jlies-Atherton
Języki publikacji EN
EN The present paper deals with a temperature dependent modelling approach for the generation of hysteresis loops of ferromagnetic materials. The physical model is developed to study the effect of temperature on the magnetic hysteresis loop using JA model. The thermal effects were incorporated through temperature dependent hysteresis parameters of JA model. The temperature-dependent JA model was validated against measurements made on the ferrite material and the results of proposed model were in good agreement.
PL Zaprezentowano metodę modelowania pętli histerezy z uwzględnieniem wpływu temperatury. Do tego celu wykorzystano model Jiles- Atherton włączając do modelu parametry zależne od temperatury. Model sprawdzono na materiałach ferrytowych.
Słowa kluczowe
PL Model Jiles-Atherton   pętla histerezy  
EN Jiles-Atherton model   magnetic hysteresis   temperature   modeling  
Wydawca Wydawnictwo SIGMA-NOT
Czasopismo Przegląd Elektrotechniczny
Rocznik 2012
Tom R. 88, nr 4a
Strony 253--256
Opis fizyczny Bibliogr. 12 poz., rys., tab., wykr.
autor Ladimi, A.
autor Mekideche, M.
  • Abdelaziz Ladjimi, département de génie électrotechnique et Automatique, université de Guelma, Algérie
[1] A. Raghunathan, Y. Melikhov, J. E. Snyder, and D. C. Jiles, Theoretical model of dependence of hysteresis based mean field theory, IEEE Transactions on Magnetics, vol. 46, no. 6, pp, 1507- 1509, 2010.
[2] D.C. Jiles, D.L. Atherton, Theory of ferromagnetic hysteresis, Journal of Magnetism and magnetic materials Vol. 61, 1986. pp 48-60.
[3] D. C. Jiles, Introduction to Magnetism and Magnetic Materials, London, U.K.: Chapman & Hall, 1991.
[4] G.S. Park, S.Y. Hahn, K.S. Lee, H.K. Jung. IEEE Transactions on Magnetic. 29 (2) (1993) 1542.
[5] H. Bleuvin, Analyse par la méthode des éléments finis des phénomènes magnéto-thermiques – application aux systèmes de chauffage par induction, Phd Thesis, Polytechnic institute of Grenoble, 1984.
[6] P. R. Wilson, J. N. Ross, and A. D. Brown, “Simulation of magnetic component models in electric circuits including dynamic thermal effects,” IEEE Trans. Power Electron., vol. 17, no. 1, pp. 55–65, Jan. 2002.
[7] D.C. Jiles, J.B. Thoelke et M.K. Devine, Numerical determination of hysteresis parameters for the modeling of magnetic properties using the theory of ferromagnetic hysteresis, IEEE Transactions on Magnetics, Vol. 28, pp. 27- 35, 1992.
[8] A. Raghunathan, Y. Melikhov, J. E. Snyder, and D. C. Jiles, Modeling the Temperature dependence of hysteresis based on Jiles-Atherton theory, IEEE Transactions on Magnetics, Vol. 45, N0. 10, pp. 3954- 3957, 2009.
[9] O. Benda, V. Ac, New Approach to Experimental Investigation of Coercivity Temperature Dependence, IEEE Transactions on Magnetics., vol. 3, n0. 3, pp, 518-521, 1967.
[10] J. Hauschild, H. Fritzsche, S. Bonn, and Y. Liu, “Determination of the temperature dependence of the coercivity in Fe/Cr (110) multilayers,” Appl. Phys. A: Mater. Sci. Process., vol. 74, pp. S1541–S1543, 2002.
[11] A. Benabou, S. Cl!enet, F. Piriou, Comparison of Preisach and Jiles–Atherton models to take into account hysteresis phenomenon for finite element analysis, Journal of Magnetism and Magnetic Materials Vol. 261, 2003. pp 139-160.
[12] A. Benabou, Identification et optimisation des paramètres du modèle de Jiles-Atherton pour la modélisation de l’hystérésis magnétique , JGGE’01 Nancy (France), 13-14 Novembre, pp. 229-234, 2001.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-article-BPOC-0060-0062