Tytuł artykułu
Autorzy
Identyfikatory
Warianty tytułu
An effect of iron powder type on the mechanical properties of sintered manganese steel Fe-3% Mn-0.8%C
Języki publikacji
Abstrakty
W pracy przedstawiono badania dotyczące wpływu rodzaju proszku żelaza na własności mechaniczne spieków Fe-3%Mn-0,8%C. Zdecydowano się zbadać własności mechaniczne stali manganowych, których mieszanki wykonano z różnych proszków żelaza. Do badań użyto redukowanego proszku żelaza NC 100.24, rozpylanych proszków żelaza ABC 100.30 oraz ASC 100.29. Wypraski spiekano w temperaturze 1120 °C oraz 1250 °C w atmosferze czystego wodoru oraz czystego azotu. Do najważniejszych czynników, które wpływają na własności materiałów spiekanych, należą między innymi: gęstość, temperatura spiekania, zastosowana atmosfera ochronna, szybkość i sposób chłodzenia po spiekaniu. Przedstawione wyniki badań potwierdzają, że oprócz wymienionych wyżej czynników, rodzaj użytego rodzaju proszku żelaza, wpływa na własności mechaniczne badanych stali spiekanych.
The main purpose of this work was to investigate correlation between iron powder type the mechanical properties of sintered Fe-3%Mn-0.8%C manganese steel. Sintered manganese steels made of three different types of iron powder (sponge iron powder grade NC100.24 and atomized iron powders grades ABC100.30 and ASC100.29) with carbon and ferromanganese additions were prepared. Specimens were sintered in hydrogen atmosphere at two temperatures 1120 °C and 1250 °C. The factors that contribute to the mechanical properties of sintered manganese steels like sintering temperature and type of iron powder are shown. Test results demonstrate that besides sintering atmosphere, sintering temperature and cooling rate, the type of iron powder in investigated steels has an influence on the mechanical properties.
Wydawca
Czasopismo
Rocznik
Tom
Strony
719--724
Opis fizyczny
Bibliogr 12 poz., tab.
Twórcy
autor
- AGH Kraków, Katedra Metaloznawstwa i Metalurgii Proszków; al. Mickiewicza 30, 30-059 Kraków, kasia.s4@wp.pl
Bibliografia
- 1. Ciaś A.: Development and Properties of Fe-Mn-(Mo)- (Cr)-C Sintered Structural Steels. Uczelniane Wydawnictwa Naukowo-Dydaktyczne AGH, Dissertations monographs 129, Kraków 2004
- 2. Zapf G., Hoffmann G., Dallal K.: Effect of additional alloying elements on the properties of sintered manganese steels. Powder Metallurgy, 1975, t. 18, nr 35, s. 215–236
- 3. Ciaś A., Mitchell S. C., Pilch K., Ciaś H., Sułowski M., Wroński A. S.: Tensile properties of Fe-3 Mn-0.6-0.8C steels sintered in semiclosed containers in dry hydrogen, nitrogen and mixtures thereof. Powder Metallurgy, 2003, t. 46, nr 2, s. 165–170
- 4. Šalak A.: Sintered manganese steels, Part I: Effect of structure of Initial Iron Powders upon Mechanical properties. Powder Metallurgy International, 1980, t. 12, nr1, s. 28–31
- 5. Sinka V., Šalak A., Selecka M., Keresti R., Wroński A. S.: The effect of iron powder grade on density and bending strength of sintered manganese steel. Materiały Konferencyjne International Conference DFPM’99, “Deformation Fracture In Structural PM Materials”. Editor L. Parilák, H. Daninger, Pieštany, September 19-22,1999. t. 2, s. 38–41
- 6. Ciaś A., Sułowski M.: Materiały Konferencyjne Międzynarodowej Konferencji DF PM’99 „Deformation and Fracture in Structural PM Materials”. Editor L., Parilák, H. Daninger, Pieštany, September 19-22, 1999. t. 2, s. 112–117
- 7. Sułowski M.: Wysokowytrzymale, konstrukcyjne spieki żelazo- mangan-węgiel. Rudy Metale, t. 47, 2002, nr 9, s. 454–460
- 8. Ciaś A., Mitchell S. C., Watts A., Wroński A. S.: Microstructure and mechanical properties of sintered (2-4)Mn-(0,6-0,8)C steels. Powder Metallurgy 1999, t. 42, nr 3, s. 227–233
- 9. Sułowski M. Frydrych J.: Wpływ temperatury spiekania i szybkości chłodzenia na strukturę i własności mechaniczne konstrukcyjnych spieków Fe-(3-4) %Mn-0,8 %C. Rudy Metale, t. 45, 2000, nr 7, s. 327–332
- 10. Sułowski M., Ciaś A: Effect of processing variables on mechanical properties of sintered manganese steels Fe-3 %Mn- 0,8 %C. Mat. konf. AMT’98 17-21 maj Kraków- Krynica 1998. Inżynieria Materiałowa, t. 19, 1998, nr 4(105), s. 1179–1182
- 11. Sułowski M.: Struktura i własności mechaniczne konstrukcyjnych spieków Fe-Mn-C. Praca doktorska
- 12. Sułowski M.: Zastosowanie atmosfery azotu do produkcji spiekanych stali manganowych. Rudy Metale, t. 48, 2003, nr 12, s. 602–613
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPL6-0015-0017