Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-article-BPG8-0056-0020

Czasopismo

Journal of Polish CIMAC

Tytuł artykułu

Analysis of relations between the compression ring characteristic parameters

Autorzy Serdecki, W. 
Treść / Zawartość http://www.polishcimeeac.pl/
Warianty tytułu
Języki publikacji EN
Abstrakty
EN A proper design of compression ring secures its correct and long term operation. A good ring contact to cylinder wall along the whole circumference with the required distribution of circumferential pressure at the same time are symptoms of this correctness. The analytical methods and more often numerical ones are applied when designing piston rings. A characteristic parameter most often designated as K, which facilitates the comparison of different ring designs and allows for anticipation of its elastic properties is used at the stage of ring design. The following study presents the most significant mathematical relations between the ring geometry and forces that are acting on ring, and shows that results of force operation could differ relative to the point of their application. Relations between the tangential force and the circumferential one have been established as well. For three compression rings verifying tests consisting in definition of selected parameters using analytical and numerical methods have been carried out. The analysis of attained results and trials on explanation of noticed discrepancies are presented in the study as well.
Słowa kluczowe
EN marine combustion engine   piston ring   oil film   ring wall pressure  
Wydawca Faculty of Ocean Engineering and Ship Technology, Gdańsk University of Technology
Czasopismo Journal of Polish CIMAC
Rocznik 2011
Tom Vol. 6, no 2
Strony 171--180
Opis fizyczny Bibliogr. 9 poz., rys., tab.
Twórcy
autor Serdecki, W.
Bibliografia
[1] Iskra A., Studium konstrukcji i funkcjonalności pierścieni w grupie tłokowo-cylindrowej. Wydawnictwo PP, Poznań 1996.
[2] Kozaczewski W., Konstrukcja grupy tłokowo-cylindrowej silników spalinowych. WKŁ, Warszawa 2004.
[3] Kurowski R., Niezgodziński M., Wytrzymałość materiałów. PWN , Warszawa 1968.
[4] Piaseczny L., Technologia naprawy okrętowych silników spalinowych. Wydawnictwo Morskie, Gdańsk 1992.
[5] Piston Ring Manual. Published by Goetze. ©2008 Federal_Mogul Burscheid GmbH.
[6] Serdecki W., Badania współpracy elementów układu tłokowo-cylindrowego silnika spalinowego. Wydawnictwo Politechniki Poznańskiej, Poznań 2002.
[7] Serdecki W., Krzymień P., Distribution of Piston Compression Ring Pressure Against the Deformed Cylinder Wall. W: Combustion Engines, No. 2/2011, s. 17 – 24.
[8] Serdecki W., Determination of Compression Ring Wall Pressure Distribution. Journal of POLISH CIMAC. Energetic aspects, Gdańsk 2010, Vol. 5, No. 1.
[9] Serdecki W., Krzymień P., Dependence of Piston Ring Parameters Determination Accuracy on the Method of Calculation. Journal of Kones, Kraków 2011.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-article-BPG8-0056-0020
Identyfikatory