Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-article-BPG8-0020-0041

Czasopismo

Advances in Materials Science

Tytuł artykułu

Reliable method of assessing fracture properties of asymmetric bonded joints

Autorzy Tysarczyk, J.  Budzik, M.  Jumel, J.  Imielińska, K.  Shanahan M. 
Treść / Zawartość http://www.degruyter.com/view/j/adms
Warianty tytułu
Języki publikacji EN
Abstrakty
EN Two methods of assessing fracture properties of adhesive joints were studied. Two wedge tests: with continuous deflection and with force measurements were compared. Asymmetric geometry of the bonded joint was considered, i.e. two different plates of aluminium alloys: Al-Cu and Al-Mg, were bonded with epoxy DGEBA adhesive. The analytical model is shown to estimate the values of fracture properties: crack position and critical fracture energy. It was found that both methods allow easy and reliable estimation and comparison of fracture properties, although some differences were observed.
Słowa kluczowe
EN bonded joints   adhesion   fracture   wedge test  
Wydawca Politechnika Gdańska
Czasopismo Advances in Materials Science
Rocznik 2010
Tom Vol. 10, nr 1(23)
Strony 43--52
Opis fizyczny Bibliogr. 17 poz., rys., tab.
Twórcy
autor Tysarczyk, J.
autor Budzik, M.
autor Jumel, J.
autor Imielińska, K.
autor Shanahan M.
  • Faculty of Mechanical Engineering, Dept. of Material Science and Engineering, Gdańsk University of Technology, Narutowicza 11/12, 80-233 Gdansk, Poland
Bibliografia
1. Wegman R., Tullos T. R.: Handbook of Adhesive Bonded Structural Repair, Noyes Publications, 1992.
2. Täljsten B.: The Importance of Adhesive Bonding-An histiroci overview and future possibilities, Proceedings of the International Symposium on Bond Behaviour of FRP in Structures, ed. Chen and Teng, International Institute for FRP in Construction, 2005.
3. Licari J. J., Swanson D. W. : Adhesive Technology for electronic applications, William Andrew Publishing, 2005.
4. Rider A. N., Olsson-Jacques C. L., Arnott D. R.: Influence of Adherend Surface Preparation on Bond Durability, Surf. Interface Anal. 27, pp. 1055–1063, 1999.
5. Critchlow G., Brewis D. M.: Review of surface pretreatments for aluminium alloys, J. Adhesion and Adhesives, 16, pp. 255-275, 1996.
6. Irfan M. H.: Chemistry and Technology of Thermosetting Polymers in Construction Applications, Kluwer Academic Publishers, 1998.
7. Jin F. L., Park S. J.: Improvement in fracture behaviors of epoxy resins toughened with sulfonated poly(ether sulfone), Polymer Degradation and Stability, pp. 509-514, 2007.
8. Aymerich F., Lecca G., Priolo P.: Modelling of delamination growth in composite laminates by the virtual internal bond method, Composites: Part A 39 pp. 145–153, 2008.
9. Dillarad D. A.: Adhesion Science and Engineering, A. V. Pocius [ed.] , Eslevier Science, pp.1-45, 2002.
10. Bujanda A., Copeland C., Dibelka J., Forster A., Holmes L., Jensen R., Kosik W., McKnight S., Koellhoffer S., Gillespie Jr. J.: Analysis of Adhesively Bonded Ceramics Using an Asymmetric Wedge Test, ARL-TR-4665, 2008.
11. Goland M., Reissner E.: The stresses in cemented joints, J. Appl. Mech., Trans. ASME, 66, A17–A27, 1944.
12. Carpenter W. C.: Stresses in bonded connections using finite elements, Int. J. Numer. Methods Engng., 15, pp. 1659–1680, 1980.
13. Budzik M., Jumel J., Imielinska K., Shanahan M. E. R.: Accurate and continuous adhesive fracture energy determination using an instrumented wedge test, International Journal of Adhesion and Adhesives 29, pp. 694–701, 2009.
14. Griffith, A. A.: The phenomena of rupture and flow in solids, Philosophical Transactions of the Royal Society of London, A 221, pp. 163–198, 1922.
15. Irwin G.: Analysis of stresses and strains near the end of a crack traversing a plate, Journal of Applied Mechanics 24, pp. 361–364, 1957.
16. Aglan H, Abdo Z.: An innovative approach to fatigue disbond propagationin adhesive joints, J Adhes Sci Technol, 10, pp.183–98, 1998.
17. Sener J.-Y., Ferracin T.; Caussin L., Delannay F.: On the precision of the wedge-opened double cantilever beam method for measuring the debonding toughness of adhesively bonded plates, International Journal of Adhesion and Adhesives, Volume 22, Number 2, pp. 129-137, 2002.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-article-BPG8-0020-0041
Identyfikatory