Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-article-BPG5-0030-0017

Czasopismo

Advances in Materials Science

Tytuł artykułu

Oxide coatings on titanium produced by oxidation in fluidized bed

Autorzy Jasiński, J.  Mendzik, K.  Tatar, K.  Szota, M. 
Treść / Zawartość http://www.degruyter.com/view/j/adms
Warianty tytułu
Języki publikacji EN
Abstrakty
EN The main product of a process of titanium oxidation is titanium oxide, which covers the titanium surface. More-over oxidation in fluidized bed in temperature range of 600-700°C influences on outer layers of titanium specimen, where a diffusion layer of oxygen is observed. Microstructures of titanium with visible oxide coatings on its surface after thermo-chemical treatment are described. Microhardness measurements of titanium surface layers after oxidation process were made with a Knoop microhardness tester and showed significant differences accord-ing to oxidation parameters. Finally, the surfaces of titanium after oxidation in fluidized bed were scratched in aim to measure their adhesion to the substrate surface.
Słowa kluczowe
EN titanium   oxidation   fluidized bed   adhesion  
Wydawca Politechnika Gdańska
Czasopismo Advances in Materials Science
Rocznik 2008
Tom Vol. 8, nr 1(15)
Strony 48--53
Opis fizyczny Bibliogr. 8 poz., rys., tab.
Twórcy
autor Jasiński, J.
autor Mendzik, K.
autor Tatar, K.
autor Szota, M.
  • Czestochowa University of Technology, Faculty of Materials Processing Technology and Applied Physics, Institute of Materials Engineering Częstochowa, Poland
Bibliografia
1. Langer R.: Biomaterials and biomedical engineering. Chemical Engineering Science 50, 1995, pp. 4109-4121.
2. Niinomi M., Kuroda D., Fukunaga K., Morinaga M., Kato Y., Yashiro T., Suzuki A: Corrosion wear fracture of new 13 type biomedical titanium alloys. Materials Science and Engineering A263, 1999, pp. 193-199.
3. Okazaki Y.: A new Ti-15Zr-4Nb-4Ta alloy for medical applications. Current Opinion in Solid State and Materials Science 5, 2001, pp. 45-53.
4. Liu X., Chu P.K., Ding C.: Surface modification of titanium, titanium alloys, and related materials for biomedical applications. Materials Science and Engineering R 47, 2004, pp. 49-121.
5. Jones F.H.: Teeth and bones: applications of surface science to dental materials and related biomaterials. Surface Science Reports 42, 2001, pp. 75-205.
6. Chauvy P.F., Madore C., Landolt D.: Variable length scale analysis of surface topography: characterization of titanium surfaces for biomedical applications. Surface and Coatings Technology 110, 1998, pp. 48-56.
7. Garcia-Alonso M.c., Saldafia L., Valles G., Gonzalez-Carrasco J.L., Gonzalez-Cabrero J., Martinez M.E., Gil-Garay E., Munuera L.: In vitro corrosion behaviour and osteoblast response of thermally oxidised Ti6Al4V alloy, Biomaterials, 2003, pp. 19-26.
8. Kró1 S.: Mechanizm i kinetyka utleniania tytanu oraz wybranych stopów tytanu. Studia i Monografie WSI-Opole 82, 1994.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-article-BPG5-0030-0017
Identyfikatory