Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button


Computer Assisted Mechanics and Engineering Sciences

Tytuł artykułu

Finite displacements in reciprocity-based FE formulation

Autorzy Kompiš, V.  Novák, P.  Handrik, M. 
Treść / Zawartość
Warianty tytułu
Konferencja 8th International Conference on Numerical Methods in Continuum Mechanics (September 19-24, 2000 ; Liptovsky Ján, Low Tatras ; Slovakia)
Języki publikacji EN
EN In this paper, Trefftz polynomials are used for the development of FEM based on the reciprocity relations. Such reciprocity principles are known from the Boundary Element formulations, however, using the Trefftz polynomials in the reciprocity relations instead of the fundamental solutions yields the non-singular integral equations for the evaluation of corresponding sub-domain (element) relations. A weak form satisfaction of the equilibrium is used for the inter-domain connectivity relations. For linear problems, the element stiffness matrices are defined in the boundary integral equation form. In non-linear problems the total Lagrangian formulation leads to the evaluation of the boundary integrals over the original (related) domain evaluated only once during the solution and to the volume integrals containing the non-linear terms. Also, Trefftz polynomials can be used in the post-processing phase of the FEM computations for small strain problems. By using the Trefftz polynomials as local interpolators, smooth fields of the secondary variables (strains, stresses, etc.) can be found in the whole domain (if it is homogeneous). This approach considerably increases the accuracy of the evaluated fields while maintaining the same rate of convergence as that of the primary fields. Stress smoothing for large displacements will be the aim of further research. Considering the examples of simple tension, pure bending and tension of fully clamped rectangular plate (2D stress/strain problems) for large strain-large rotation problems, the use of the initial stiffness, the Newton-Raphson procedure, and the incremental Newton-Raphson procedure will be discussed.
Słowa kluczowe
PL metoda elementów skończonych   przemieszczenie   polynomial Trefftz'a  
EN finite element method   displacement   Trefftz polynomial  
Wydawca Instytut Podstawowych Problemów Techniki PAN
Czasopismo Computer Assisted Mechanics and Engineering Sciences
Rocznik 2002
Tom Vol. 9, No. 4
Strony 469--480
Opis fizyczny Bibliogr. 27 poz., tab., wykr.
autor Kompiš, V.
autor Novák, P.
autor Handrik, M.
  • University of Žilina, Faculty of Mechanical Engineering, Vel'ky Diel, 010 26 Žilina, Slovakia
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-article-BPB2-0006-0078