Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-article-BOS5-0021-0028

Czasopismo

Journal of Achievements in Materials and Manufacturing Engineering

Tytuł artykułu

Hot closed die forging - State-of-Art and future development

Autorzy Tomov, B. 
Treść / Zawartość http://www.journalamme.org
Warianty tytułu
Języki publikacji EN
Abstrakty
EN Purpose: This paper presents an overview of the hot close-die-forging (HCDF) and aims at drawing up some new ideas and conclusions about future development of the HCDF. Design/methodology/approach: Exploring the literature survey and the author's experience, the state-of-art of the HCDF is defined. The reason to do this are signs of instability in development of HCDF - a production method, well known due to its advantages, concerning both dimension accuracy and favorable mechanical properties in effect of micro structure changes. Findings: This study shows advantages, possibilities and feature development of the HCDF. Challenges and possible response to them have been discussed. Research limitations/implications: Analyzing the experience gained until now, the possible new research fields have been shown: forging of new materials, new understand ness of near-net forging, combining operations, physical and numerical simulations. Practical implications: HCDF is a production method, well known due to its advantages, concerning both dimension accuracy and favorable mechanical properties in effect of microstructure changes.
Słowa kluczowe
PL kucie w matrycach zamkniętych   projektowanie procesów technologicznych   kucie dokładne  
EN closed die forging   process planning   near-net forging  
Wydawca International OCSCO World Press
Czasopismo Journal of Achievements in Materials and Manufacturing Engineering
Rocznik 2007
Tom Vol. 24, nr 1
Strony 443--449
Opis fizyczny Bibliogr. 33 poz., rys.
Twórcy
autor Tomov, B.
  • Department of Materials Science and Technology, University of Rousse, 8 Studentska St., Rousse 7017, Bulgaria, btomov@ru.acad.bg
Bibliografia
[1] N. Akgerman, J.R. Becker, T. Altan, Perform design in closed-die forging, Metalurgia and Metal Forming (1973) 135-138.
[2] T. Altan, D.N. Akgerman, Rechnergestuetzte Konstruktion und Fertigung von Schmiedegesenke zum Vor - und Fertigschmieden, Industrie - Anzeiger 96/34 (1974) 763-767 (in German).
[3] T. Altan, V. Vazqes, Numerical process simulation for tool and process design in bulk metal forming, Annals of CIRP 45/2 (1996) 599-607.
[4] K.J. Barnett, Research initiatives for the forging industry, Journal of Materials Processing Technologies 98 (2000) 162-164.
[5] G. Zhao, E. Wright, R. V. Grandhi, Computer aided perform design in forging using the inverse die contact tracking method, International Journal of Machine Tools & Manufacturing 36/7 (1996) 755-769.
[6] S.K. Biswas, W.A. Knight, Preform design for closed-die forgings: Experimental basis for computer aided design, International Journal of Machine Tool Design and Research, 15 (1975) 179-193.
[7] E. Doege, R. Bohnsack, Closed die technologies for hot forging, Journal of Materials Processing Technologies 98 (2000) 165-170.
[8] E. Doege, H. Naegele, FE simulation for precision forging process of bevel gears, Annals of the CIRP 43/1 (1994) 241-244.
[9] N.C. Duffy, Technomorphology, Innovation and Energy Analysis: II Analytical Methods, Journal of Materials Processing Technologies (1983) 349-371.
[10] E. Doege, G. Siberbach, Influence of various machine tools components on workpieces quality, Annals of the CIRP, 31/1 (1990) 209-213.
[11] P. Fascher, Vereinfachung der Waermebechandlung durch gesteueres Abkuehlen, Industrie Anzeiger 5 (1982) 23-25.
[12] G. Hartke, B. Adams, U. Weiss, Konzeption eines Werkzeugsistem zum Prezisionschmieden (1987) 12/1-12/13.
[13] K. Hyunkee, T. Yagi, M. Yamanake, FE - Simulation as a must tool in cold/warm forging process tool design, Journal of Materials Processing Technology 98 (2000) 143-149.
[14] Y.K. Heon, W.K. Dong, Computer aided pre-form design in the closed die-forging process, Journal of Materials Processing Technology 41 (1994) 83-104.
[15] M. Herrmann, M. Wilhelm, P. Keck, Process simulation of metal-forming processes: some examples, Annals of the CIRP 40/1 (1991) 285-289.
[16] D.H. Hristov, B. Tomov, D.K. Kolev, Stresses and strains in a die for closed-die forging of cylindrical spur gears, Journal of Materials Processing Technology 23 (1990) 55-63.
[17] K. Lange, Modern metal forming technology for industrial production, Journal of materials processing technologies 71 (1997) 2-13.
[18] T. Jimma, F. Sekine, Effect of rigidity of die and press on blanking accuracy of electronic machine parts, Annals of CIRP 41/1 (1992) 319-322.
[19] A.N. Levanov, N.I. Volosov, V.I. Lukin, The use of the active friction forces in a closed die, Kuznecno - shtampovochnoe proizwodstvo 2 (1981) 4-6 (in Russian).
[20] V.K. Lobanov, S.P. Ponomarenko, Combined timming and forming operations, Kuznecno – shtampovochnoe proizwodstvo 8 (1978) 8-10 (in Russian).
[21] S.I. Oh, S.M. Yoon, A new method to design blockers, Annals of the CIRP 43/1 (1994) 245-248.
[22] S.I. Oh, W.T. Wu, K. Arimoto, Recent developments in process simulation for bulk forming processes, Journal of Materials Processing Technology 111 (2001) 2-9.
[23] F.H. Osman, A.N. Bramley, Preform design for forging rotationally symmetric parts, Annals of the CIRP 44 (1995) 227-230.
[24] S. Sun, L.Y. Guo, A die forging design approach for controlling metal flow way and application in practice, International Journal of Machine Tool Design and Research 34/2 (1994) 161-167.
[25] G.P. Teterin, I.J. Tarnovskij, A.A. Chechik, A shape complexity criterion, Kuznecno – shtampovochnoe proizwodstvo 7 (1966) 6-9 (in Russian).
[26] B. Tomov, T. Wanheim, Preform design, based on model materials, Proceedings of AMTECH'93, 1993.
[27] B. Tomov, D.K. Kolev, About the thickness of the die-sets plates for closed die forging on crankshaft presses, Kuznechno - shtampovochnoe proizvodstvo 4 (1988) 4-6.
[28] B. Tomov, K. Chodnikiewicz, A mechanical device for measuring displacements and rotations of a blanking or forging press, Journal of Materials Processing Technology 77 (1998) 70-72.
[29] B. Tomov, A new shape complexity factor, Journal of Materials Processing Technology 92-93 (1999) 439-443.
[30] T. Wanheim, J. Dankert, E. Jonson, Anwendung der Modeltechnik bei Masivumformungvorgaengen, Industrie Anzeiger 70 (1977).
[31] T. Wanheim, J. Dankert, Model material technique applied in analyses of forging of a specimen of complicated shape, Scandinavian Journal of Metalurgy 6 (1977) 185-190.
[32] W.T. Wu, J.G.Li, J.P. Tang, Finite Element Analysis of three-dimensional metal flow in cold and hot forming processes, Annals of the CIRP 43/1 (1994) 235-239.
[33] G. Zhao, E. Wright, R.V. Grandhi, Forging perform design with shape complexity control in simulating backward deformation, International Journal of Machine Tools & Manufacturing 35/9 1225-1239.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-article-BOS5-0021-0028
Identyfikatory