Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first last
cannonical link button


Journal of Achievements in Materials and Manufacturing Engineering

Tytuł artykułu

Robotized PTA surfacing of nanomaterial layers

Autorzy Klimpel, A.  Kik, T.  Górka, J.  Czupryński, A.  Hajduk, P. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
EN Purpose: of this research was to investigate the influence of heat input in robotized surfacing on quality and properties of nanomaterial layers. Design/methodology/approach: quality of single and multilayer, stringer and weave beads was assessed by abrasion resistance tests according to ASTMG65 standard, erosion resistance tests according to G76 standard, metallographic examinations and hardness tests. Findings: due to the fact that the robotized surfacing stand was used, the analysis of properties of the deposits was performed for single and multilayer, stringer and weave beads. Research limitations/implications: for complete information about tested deposits it is needed to compare deposits properties PTA surfaced with other technologies of nanomaterial layers manufacturing products. Practical implications: Results of this paper is an optimal range of parameters of surfacing of single and multilayer, stringer and weave beads of nanomaterial layers. Originality: tests, abrasion and erosion resistance tests) were provided for surfacing of single and multilayer, stringer and weave beads, and the results were compared. The influence of heat input on layers properties and theirs structure was defined.
Słowa kluczowe
PL spawanie   zrobotyzowana obróbka powierzchniowa   nanomateriały   odporność na ścieranie   odporność na erozję  
EN welding   robotized surfacing   nanomaterials   abrasion resistance   erosion resistance  
Wydawca International OCSCO World Press
Czasopismo Journal of Achievements in Materials and Manufacturing Engineering
Rocznik 2009
Tom Vol. 37, nr 2
Strony 644--651
Opis fizyczny Bibliogr. 21 poz., rys., tabl.
autor Klimpel, A.
autor Kik, T.
autor Górka, J.
autor Czupryński, A.
autor Hajduk, P.
  • Welding Department, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland Gliwice, Poland,
[1] M. Wysiecki, Modern tool materials. WNT, Warsaw, 1997, (in Polish).
[2] A. Klimpel, L. A. Dobrzański, D. Janicki, A. Lisiecki, Abrasion resistance of GMA metal cored wires surfaced deposits, COMMENT. 13th AMME, Wisła, 2005, 311-314.
[3] K. J. A. Brookes, World Directory and Handbook of Hardmetals and Hard Materials, East Barnet, International Carbide Data, 6, 1996.
[4] Koji Kato Koshi Adachi, Wear of advanced ceramics, Wear, 253/11-12 (2002) 1097-1104.
[5] M. Darabara, G. D. Papadimitriou, L. Bourithis, Synthesis of TiB2 metal matrix composite on plain steel substrate: microstructure and wear properties, Materials Science and Technology 237 (2007) 839-846.
[6] G. Ramana, G. Reddy, L. Antony, Abi/Inform Trade and industry, 2003.
[7] J. N. DuPont, On Optimization of the Powder Plasma Arc Surfacing Process, Metallurgical and Materials Transactions 31A (2000) 1805-1817.
[8] D. Zhong, B. Mishra, J. J. Moore, A. Madan, Effect of pulsed plasma processing on controlling nanostructure and properties of thin film/coatings, Surface Engineering 20/3 (2004) 196-204.
[9] E. B. Macak, W. Munz, J. M. Rodenburg, Edge related effects during ion assisted Pvd on sharp edges and implications for coating of cutting tools, Surface Engineering 19/4 (2003) 310-314.
[10] E. M. Oks, Generation of multiply charged ions in vacuum arc plasmas, I/ IEEE Transaction on Plasma Science 30/1 (2002) 202-207.
[11] N. Hey, Nanorevolution, special report nanotechnology, 2003.
[12] B. Schwebber, Living in the material world, EDN, 2004.
[13] J. Alastair, T. Walling Satya, Nanotech Regulation mercarus reports, 2006.
[14] L.Qian, J. P. Hinestroza, Application of Nanotechnology for high performance textiles, Journal of Textile and Apparel, Technology and Management 4/1 (2004) 1-7.
[15] A. Rae, Nanomaterials Promise Innovative Solutions, Advanced packaging, 2005.
[16] P. Gibson, The Wonders and Dangers of Nanotechnology, Safety Compliance letter, 2007.
[17] X. Chen, S. Mao, Titanium Dioxide Nanomaterials: Synthesis, Properties, Modifications, and Applications, Chemical Review 107/7 (2007) 2891-2959.
[18] P. Tucker, Nanotech: Big Risks, Big Opportunities, The futurist, 2007, 8-9.
[19] A. Klimpel, Robotized GMA surfacing of cermetal deposits, Journal of AMME 18/1-2 (2006) 395-398.
[20] A. Klimpel, L. A. Dobrzański, D. Janicki, A. Lisiecki, Abrasion resistance of GMA metal cored wires surfaced deposits, Proceedings of the 13th Scientific International Conference „Achievements in Mechanical and Materials Engineering” AMME’2005, Gliwice - Wisła, 2005, 311-314.
[21] A. Klimpel, T. Kik, Erosion and abrasion wear resistance of GMA wire surfaced nanostructural deposits, Archives of. Materials Science Engineering 30/2 (2008) 121-124.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-article-BOS2-0021-0072