PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Applying sensitivity analysis for identification of thermal resistance in continuous casting of metals by inverse approach

Autorzy
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The problem of appropriate location of the sensors for identification of ingot mould thermal resistance during continuous casting of metals is the subject of the paper. Location of the sensors is based on the results of sensitivity analysis for the steady-state inverse heat conduction problem. Analysed problem belongs to the group of inverse problems. The present work shows also the method of identification of unknown thermal resistance using the temperature measurements at the number of sensors located in the wall of the mould. The influence of the location of the sensors on the results of identification is analysed. Validation of the proposed inverse method realized by comparison results taken from solution of inverse and direct problems. Several numerical examples are presented and analysed.
Rocznik
Strony
3--19
Opis fizyczny
Bibliogr. 14 poz., rys., tab.
Twórcy
autor
autor
  • Department of Automatic Control, Silesian Technical University, Akademicka 16, 44-101 Gliwice, Poland
Bibliografia
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BGPK-0638-2773
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.