Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-article-BAT3-0010-0022

Czasopismo

TASK Quarterly : scientific bulletin of Academic Computer Centre in Gdansk

Tytuł artykułu

Modeling of flow phenomena associated with polymer injection into a mold

Autorzy Przybylski, W.  Dzionk, S. 
Treść / Zawartość http://task.gda.pl/quart/index.html
Warianty tytułu
Języki publikacji EN
Abstrakty
EN The process of plastic injection, although of extensive industrial use, is still relatively poorly researched. In building a finite element model for the injection process, the emphasis was laid on the modeling of phenomena occurring at the polymer-mold interface. With this purpose in mind, the mesh was refined in the vicinity of mold walls. The influence of the air present in the mold during the injection process was also taken into account. As the outcome of solving the problem so formulated, a model of polymer behavior at the mold wall interface has been obtained. Numerical simulations were carried out with the aid of a FIDAP flow-modeling program, and their results were partly verified by experimental means.
Słowa kluczowe
EN injection molding   surface layer   plastic  
Wydawca Centrum Informatyczne Trójmiejskiej Akademickiej Sieci Komputerowej
Czasopismo TASK Quarterly : scientific bulletin of Academic Computer Centre in Gdansk
Rocznik 2003
Tom Vol. 7, No 2
Strony 233--241
Opis fizyczny Bibliogr. 9 poz., rys.
Twórcy
autor Przybylski, W.
  • Department of Manufacturing Engineering and Automation, Mechanical Engineering Faculty, Gdansk University of Technology, Narutowicza 11/12, 80-952 Gdansk, Poland
autor Dzionk, S.
  • Department of Manufacturing Engineering and Automation, Mechanical Engineering Faculty, Gdansk University of Technology, Narutowicza 11/12, 80-952 Gdansk, Poland, sdzionk@due.mech.pg.gda.pl
  • Department of Manufacturing Engineering and Automation, Gdańsk University of Technology, Narutowicza 11/12, 80-952 Gdańsk, Poland, sdzionk@due.mech.pg.gda.pl
Bibliografia
[1] Sikora R 1997 Inżynieria Materiałowa4160 (in Polish)
[2] Joshi Y M, Lele A K and Mashelkar R A 2000 J. Non-Newton. Fluid Mech.94(2-3) 135
[3] Guo X, Isajev A I and Guo L 1999 Polym. Eng. Sci.39(10) 2096
[4] Guo X, Isajev A I and Guo L 1999 Polym. Eng. Sci.39(11) 2132
[5] Tredoux L, Satoh I and Kurosaki Y 1999 Polym. Eng. Sci.39(11) 2233
[6] Zhang T, Evans J R G and Bevis M J 1999 J. Ceram. Soc.19411
[7] Bociąga E 2000 Advances in Manufacturing Science and Technology24(3) 89
[8] Kulikov O L and Hornung K 2001 J. Non-Newton. Fluid Mech.98(2-3) 107
[9] Gadelmawla E S, Koura M M, Maksoud T M, Elewa I M and Soliman H H 2002 J. Mater.Process. Tech.123(1) 133
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-article-BAT3-0010-0022
Identyfikatory