Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-9d8a6152-8583-4475-ac45-37d9e779be6c

Czasopismo

Archives of Metallurgy and Materials

Tytuł artykułu

Optimizing of Metal Foam Design for the Use as a Heat Exchanger

Autorzy Radkovský, F.  Gebauer, M.  Merta, V. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
Abstrakty
EN The work deals with possibilities of using this specific material. It is focused on cast metal foams with a regular arrangement of internal cells and it refers to already used casting technologies – the production of metal foams with the aid of sand cores. Metal foams are used in many industries, such as: automotive, aerospace, construction, power engineering. They have unique propertiesand due to lower weight with sufficient strength and greater contact surface can be used, for example, for the conduction of heat. This article deals with the use of the metal foam as a heat exchanger. The efficiency of the heat exchanger depends on its shape and size and therefore the study is focused first on the optimization of the shape before the proper manufacture.
Słowa kluczowe
EN metal foam   3D modeling   heat exchanger   heat conduction   efficiency  
Wydawca Polish Academy of Sciences, Committee of Metallurgy, Institute of Metallurgy and Materials Science
Czasopismo Archives of Metallurgy and Materials
Rocznik 2018
Tom Vol. 63, iss. 4
Strony 1875--1881
Opis fizyczny Bibliogr. 8 poz., fot., rys., tab., wzory
Twórcy
autor Radkovský, F.
  • VŠB-Technical University of Ostrava, Faculty of Materials Science and Technology, Department of Metallurgy and Foundry Engineering, 17. Listopadu 15/2172, Ostrava-Poruba, Czech Republic, filip.radkovsky@vsb.cz
autor Gebauer, M.
  • VŠB-Technical University of Ostrava, IT4 Innovations, 17. Listopadu 15/2172, Ostrava-Poruba, Czech Republic, marek.gebauer.@vsb.cz
autor Merta, V.
  • VŠB-Technical University of Ostrava, Faculty of Materials Science and Technology, Department of Metallurgy and Foundry Engineering, 17. Listopadu 15/2172, Ostrava-Poruba, Czech Republic
Bibliografia
[1] J. Banhart, Manufacture, characterisation and application of cellular metals and metal foams. Progress in Materials Science 46, 559-632 (2001).
[2] P. Lichý, T. Elbel, I. Kroupová, F. Radkovský, Preparation and evaluation of properties of cast metallic foams with regular inner structure. Archives of Metallurgy and Materials 42, 3, 1643-1646 (2017).
[3] T. Blejchař, Návody do cvičení "Modelování proudění” – CFX. 1. vyd. Ostrava: VŠB-TU, 133, 2009. ISBN 978-80-248-2050-7 URL: <http://www.338.vsb.cz/PDF/Blejchar-CFX.pdf>
[4] T. Blejchař, Turbulence Modelování proudění – CFX, učební texty. 1. vyd. Ostrava: VŠB-TU, 259, 2010. URL: <http://www.338.vsb.cz/PDF/Turbulence_ESF_v4.pdf>
[5] P. Cohen, K. Kundu, Fluid mechanics. Academic Press, 2004. ISBN: 978-0-12-178253-5
[6] J. Y. Tu, G. H Yeoh, C. Q. Liu, Computational Fluid Dynamics – A Practical Approach, Elsevier Science Limited, UK, 2008. ISBN: 978-0-7506-8563-4
[7] F. Radkovsky et al. Production of cast metal foams with a regular internal structure. In: 25th International Conference on Metallurgy and Materials Metal 2016, May 25th-27th 2016, Brno, Czech Republic. Brno: Tanger Ltd., Ostrava, 2015
[8] Z. Kadlec,Termomechanika, návody do cvičení. 1. vyd. Ostrava: VŠB-TU, 97, 2002. ISBN:978-80-248-1736-1
Uwagi
EN The paper was worked out with the financial support of Technology Agency of the Czech Republic (TA02011333 and TH02020668), project of "Student Grant Competition” numbers SP2018/77 and SP2018/60 and this work was supported by The Ministry of Education, Youth and Sports from the National Programme of Sustainability (NPU II) project "IT4 Innovations excellence inscience – LQ1602”.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-9d8a6152-8583-4475-ac45-37d9e779be6c
Identyfikatory
DOI 10.24425/amm.2018.125118