Engineering design and strength analyses of main load-bearing parts of a mechanical rack system

• Autorzy: Blatnický M. , Dižo J. , Barta D. , Drozdziel P.

Identyfikatory

DOI

10.29354/diag/99228

• Języki publikacji: EN

Abstrakty

EN

This article presents an engineering design of a mechanical rack system along with strength analyses of its main load-bearer parts. The designed mechanical rack system is intended to be mounted in a production hall for storage of rod material with total length of 6 m. The whole structure of this equipment is welded and made of steel profiles. It consists of a main load-bearing part, which comprises a central beam and horizontal beams and four draw-out shelves on each side, which are arranged four levels. Every individual shelve is able to carry the mass of 3.0 t. As the solved rack system is not standardized but designed in compliance with specific requirements of a customer, we had to support the structure carrying capacity with strength calculations. Structural calculations were realized by means of numeric finite element method. Strength analyses were performed for the maximum load cases.

Słowa kluczowe

EN

mechanical rack system; storage of goods; strength calculations; finite element method

PL

przechowywanie; obliczenia wytrzymałościowe; metoda elementów skończonych; konstrukcja

• Wydawca: Polskie Towarzystwo Diagnostyki Technicznej
• Czasopismo: Diagnostyka
• Rocznik: 2018
• Tom: Vol. 19, No. 4
• Strony: 97--104
• Opis fizyczny: Bibliogr. 11 poz., rys., tab.

Twórcy

autor

Blatnický M.

• University of Žilina, Faculty of Mechanical engineering, Department of Transport and Handling Machnines, Univerzitná 8215/1, 010 26 Žilina, Slovak Republik

autor

Dižo J.

• University of Žilina, Faculty of Mechanical engineering, Department of Transport and Handling Machnines, Univerzitná 8215/1, 010 26 Žilina, Slovak Republik

autor

Barta D.

• University of Žilina, Faculty of Mechanical engineering, Department of Transport and Handling Machnines, Univerzitná 8215/1, 010 26 Žilina, Slovak Republik

autor

Drozdziel P.

• Lublin University of Technology, Faculty of Mechanical Engineering, Department of Transport, Combustion Engines and Ecology, ul. Nadbystrzycka 36, 20-618 Lublin, Poland

Bibliografia

• 1. Bajla J, Bronček J, Antala J, Sekerešová D. Mechanical Engineering Tables. (In Slovak). Selection Standards. Slovak Office of Standards, Metrology and Testing. 2014.
• 2. Falendysh A, Volodarets M, Hatchenko V, Vykhopen I. Software analysis for modeling the parameters of shunting locomotives chassis. MATEC Web of Conferences, 2017;116. https://doi.org/10.1051/matecconf/201711603003
• 3. Galliková J, Stuchlý V, Poprocký R, Volna P. Model calculation of posterior reliability indicators for the proposal of the maintenance system. MATEC Web of Conferences, 2018; 157. https://doi.org/10.1051/matecconf/201815708003.
• 4. Gerlici J, Lack T, Harušinec J. Realistic simulation of railway operation on the RAILBCOT test stand. Applied Mechanics and Materials, 2014;486: 387-395.
• 5. Handrik M, Vasko M, Kopas P, Saga M. Effective finite element solution and post-processing for wide load spectrum. Communications - Scientific letters of the University of Zilina 2014; 16(3a): 19-26.
• 6. Hauser V, Nozhenko O, Kravchenko K, Loulová M, Gerlici J, Lack T. car body and bogie connection modification for track curves passability improvement. MATEC Web of Conferences, 2018;157. https://doi.org/10.1051/matecconf/201815703009.
• 7. Hauser V, Nozhenko O, Kravchenko K, Loulova M, Gerlici J, Lack T. Proposal of a steering mechanism for tram bogie with three axle boxes. Procedia Engineering, 2017;192: 289-294. https://doi.org/10.1016/j.proeng.2017.06.050.
• 8. Kopas P, Saga M, Baniari V, Vasko M, Handrik M. A plastic strain and stress analysis of bending and torsion fatigue specimens in the low-cycle fatigue region using the finite element methods. Procedia Engineering 2017; 177: 526-531. https://doi.org/10.1016/j.proeng.2017.02.256.
• 9. Sapietova A, Saga M, Shimanovsky A, Sapieta M. Mobility of multibody systems in terms of their incorrectness. Communications – Scientific letters of the University of Zilina 2014; 16(3a): 6-12.
• 10. Smetanka L, Gerlici J, Lack T, Pelagić Z. Homogenization of fibers reinforced composite materials for simulation analysis. Manufacturing Technology 2015; 15(5): 914-920.
• 11. Vatulia G, Falendysh A, Orel Y, Pavliuchenkov M. Structural Improvements in a Tank Wagon with Modern Software Packages. Procedia Engineering 2017; 187: 301-307. https://doi.org/10.1016/j.proeng.2017.04.379.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).