Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-8cfdcaec-7db8-4a8b-ac4d-8d5a13c62d27

Czasopismo

Reports on Geodesy and Geoinformatics

Tytuł artykułu

The possibilities of using the terrestrial scanning data for classification of rocks in limestone mine "Czatkowice"

Autorzy Toś, C. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
Abstrakty
EN This paper presents results of a research of potential utilisation of the intensity of laser beam reflection recorded by ground-based lasers, for an initial classification of rock formations within the Czatkowice Limestone Quarry. As part of the research, spectrometric analysis in visible (VIS), near-infrared (NIR) and Short-wavelength infrared (SWIR) bands was carried out for rock samples typical for the Czatkowice Quarry. Moreover, the rock samples were scanned using equipment working within different wavelengths. The reflected intensity of the laser beam recorded for each rock sample with several different scanners were analysed to assess their potential use for rock classification. The results of this analysis were then compared with spectral curves of each sample. The relationship between the intensity of the laser beam reflection and the spectral curves can be used for selection of most suitable scanner for rock classification.
Słowa kluczowe
PL kamieniołomy wapienia   skanowanie laserowe   intensywność   klasyfikacja  
EN limestone quarry   laser scanning   intensity   classification  
Wydawca Wydział Geodezji i Kartografii Politechniki Warszawskiej
Czasopismo Reports on Geodesy and Geoinformatics
Rocznik 2014
Tom Vol. 97
Strony 80--90
Opis fizyczny Bibliogr. 15 poz., rys., tab., wykr.
Twórcy
autor Toś, C.
  • Department of Land Surveying and Engineering Geology, Cracow University of Technology, ul. Warszawska 24 , 30-115 Cracow, Poland, ctos@pk.edu.pl
Bibliografia
[1] Buckley, S. J., Kurz, T. H., Howell, J. A., Schneider, D., (2013). Terrestrial lidar and hyperspectral data fusion products for geological outcrop analysis. Computers & Geosciences, 54: 249–258. doi: 10.1016/j.cageo.2013.01.018.
[2] Franceschi, M., Teza, G., Preto, N., Pesci, A., Galgaro, A., Girardi, S., (2009). Discrimination between marls and limestones using intensity data from terrestrial laser scanner. ISPRS Journal of Photogrammetry and Remote Sensing, 64(6), 522-528. doi: 10.1016/j.isprsjprs.2009.03.003
[3] Hoefle, B., Pfeifer, N., (2007). Correction of Laser Scanning intensity data: Data and model-driven approaches. International Journal of Photogrammetry and Remote Sensing. 62(6), 415–433. doi: 10.1016/j.isprsjprs.2007.05.008
[4] Maciaszek, J., Ćwiąkała, P. (2010). Badania możliwości zastosowania skanowania laserowego do monitoringu osuwisk zboczy wyrobisk odkrywkowych na przykładzie KWB "Bełchatów". Przegląd Górniczy, 66 (6), 52–57. Retrieved from http://www.sitg.pl/starastr/pg/PG_06_2010.pdf
[5] Penasa, L., Franceschi, M., Preto, N., Teza, G., Polito, V., (2014). Integration of intensity textures and local geometry descriptors from Terrestrial Laser Scanning to map chert in outcrops. ISPRS Journal of Photogrammetry and Remote Sensing, 93, 8897. doi: 10.1016/j.isprsjprs.2014.04.003
[6] Pesci, A., Teza, G.(2008). Effects of surface irregularities on intensity data from laser scanning: an experimental approach. Annals of Geophysics, 51,(5/6). 839-848. doi: 10.4401/ag-4462
[7] Ratcliffe, S., Myers, A. (2006). Laser Scanning in the Open Pit Mining Environment A Comparison with Photogrammetry. I-SiTE Product Development White Paper. June 2006. Retrieved from
[8] http://www.gim-international.com/download/whitepaper_uploadfile_2.pdf
[9] Richards, J.A., (1993). Remote Sensing Digital Image Analysis (New York: Springer-Verlag) Chapter 10.
[10] Rosenfield, G.H., and K. Fitzpatric-Lins, (1986). A Coefficient of Agreement as a Measure of Thematic Classification Accuracy. Photogrammetric Engineering and Remote Sensing, 52 (2). 223-227
[11] Soudarissanane, S., Lindenbergh, R, Menenti, M., Teunissen P., (2009). Incidence angle influence on the quality of terrestrial laser scanning points. Laser scanning 2009, IAPRS, XXXVIII, (Part 3 W8) 183-188. Retrieved from: http://www.isprs.org/proceedings/xxxviii/3-w8/papers/183_laserscanning09.pdf
[12] Toś, C., Wolski, B., Zielina, L. (2010) Scanning tacheometers. Application of scanning technology at generating of high accuracy models of engineering objects. Kraków: Wydawnictwa Politechniki Krakowskiej.
[13] Toś, C. (2013). Supervised classification of laser scanning data in the assessment of technical conditions of masonry constructions. Technical transactions. 1-Ś/2013.
[14] Voegtle, T., Schwab, I., Landes, T. (2008). Influence of different materials on the measurements of terrestrial laser scanner. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 37 (B5). 1061-1066. Retrieved from http://www.isprs.org/proceedings/XXXVII/congress/5_pdf/182.pdf
[15] Żaczek-Peplińska, J., Falaciński, D. (2011) Evaluation of possibilities to apply laser scanning for assessment of conditions of concrete. Reports on geodesy, 1(2011), 537-544. Retrieved from: yadda.icm.edu.pl/baztech/element/bwmeta1.element.baztech-0a4bd6c9-a49c-4916-9da3-761e6e1404ef/c/Zaczek-Peplinska_Falacinski.pdf
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-8cfdcaec-7db8-4a8b-ac4d-8d5a13c62d27
Identyfikatory
DOI 10.2478/rgg-2014-0013