Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-8a730bd8-d77f-4189-92be-af8c0b3f3c73

Czasopismo

Journal of KONES

Tytuł artykułu

Simulations of front impact between two shunting locomotives at different velocities

Autorzy Szurgott, P.  Kozioł, Ł. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
Abstrakty
EN The main aim of this study is to carry out dynamic simulations of a crash between two identical shunting locomotives running at different velocities. Numerical analyses using a Finite Element Method (FEM) include front-end impact of the running locomotive with a stationary one situated on the track. Such collision scenario is required for railway vehicles operated on national and regional networks. A considered locomotive based on a Polish shunting locomotive – SM42, however the tested locomotive was slightly modernized. Finite element model of the locomotive was developed by the authors. FE analyses were conducted according to the PN-EN 15227 standard, which provides crashworthiness requirements for railway vehicle bodies. LS-DYNA computer code was used for the simulations. The paper presents selected results of analyses focused on the locomotive frame behaviour. Simulations were performed for the vehicle between 20 and 90 km/h. An influence of the impact velocity on some output quantities was determined. Contours of effective stress for selected moments of time as well as time histories of selected values are depicted. For modernized locomotives, it is required to evaluate their behaviour during the impact test. Dynamic numerical simulation is acceptable since the experimental tests on the complete objects under consideration are impractical and impossible sometimes.
Słowa kluczowe
EN finite element method   dynamic analysis   crash test   railway vehicle   LS-DYNA  
Wydawca Institute of Aviation
Czasopismo Journal of KONES
Rocznik 2016
Tom Vol. 23, No. 2
Strony 381--388
Opis fizyczny Bibliogr. 5 poz., rys.
Twórcy
autor Szurgott, P.
  • Military University of Technology Department of Mechanics and Applied Computer Science Gen. Sylwestra Kaliskiego Street 2, 00-908 Warsaw, Poland tel.: +48 22 6839947, fax: +48 22 6839355 , piotr.szurgott@wat.edu.pl
autor Kozioł, Ł.
Bibliografia
[1] PN-EN 15227+A1:2011 Standard, Railway applications – Crashworthiness requirements for railway vehicle bodies, Polish Committee for Standardization, Warsaw, Poland 2011.
[2] Dziewulski, P., Szurgott, P., Development of finite element model of shunting locomotive applicable for dynamic analyses, Journal of KONES, Vol. 21, No. 4, pp. 95-102, 2014.
[3] Dziewulski P., Konarzewski M., Szurgott P., Numerical Analysis of the Front Impact Between Two Shunting Locomotives, Journal of KONES Powertrain and Transport, Vol. 21, No. 3, pp. 81-88, 2014.
[4] Full-scale locomotive dynamic crash testing and correlations: locomotive consist colliding with steel coil truck at grade crossing (Test 3), Final Report, U.S. Department of Transportation, Office of Railroad Policy and Development, Washington, United States 2011.
[5] Kozioł, Ł., Numerical simulation of crash test of two shunting locomotives [in Polish], Master thesis, Faculty of Mechanical Engineering, Military University of Technology, Warsaw, Poland 2016.
Uwagi
PL Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-8a730bd8-d77f-4189-92be-af8c0b3f3c73
Identyfikatory
DOI 10.5604/12314005.1213757